Post by franciscocuevas on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
I have the same problem, have you resolve?Are you conected by wifi or ethernet?I was fighting 4 days and I decide to leave.
Last updated: 2025-08-24

Post by wagokurt on TargetVisu option missing in IDE ^{CODESYS Forge talk (Post)}
Thank you, so "Remote TargetVisu" is the same thing as "TargetVisu"? I think there needs to be more documentation about this, its very confusing.
Last updated: 2025-08-25

Post by harinator on CSV Utility SL ^{CODESYS Forge talk (Post)}
Hello, I'm having the same issue.. were you able to solve this? Anything in particular in the other thread that you linked that helped you solve it?
Last updated: 2025-08-29

Post by harinator on CSV Utility SL ^{CODESYS Forge talk (Post)}
Hello, I'm having the same issue.. were you able to solve this? Anything in particular in the other thread that you linked that helped you solve it?
Last updated: 2025-08-29

Post by gatto on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Sandro, did you find any solution? I'm in version 3.5.20.40 and i have only one modbus channel. I don't want the problem to happen to me if I do an update one day.
Last updated: 2025-09-01

Post by imdatatas on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Unfortunately, The same behaviour still exist with SoftMotion V4.19.0.0 too. (default ramp type is quadratic instead trapezoid for new created axis object) For your information.
Last updated: 2025-09-04

Post by cmason on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
There still is no solution to this. I am running Modbus version 4.4.0.0 and it still wont let me add more than 10 channels. Does anyone have a solution for this?
Last updated: 2025-09-05

Post by cmason on v3.5 SP19 - Modbus TCP Devices - Channel Limit? ^{CODESYS Forge talk (Post)}
There still is no solution to this. I am running Modbus version 4.4.0.0 and it still wont let me add more than 10 channels. Does anyone have a solution for this?
Last updated: 2025-09-05

Post by gseidel on High-resolution drive with SoftMotion ^{CODESYS Forge talk (Post)}
Hi kporter, what value do you use for the modulo period? Can you please provide the complete axis configuration, including all scaling values? Thanks, Georg
Last updated: 2025-09-08

Post by gseidel on Use MC_Home without enabling the drive for homing method 35 ^{CODESYS Forge talk (Post)}
Hi Artur, as mentioned by imdatatas, homing when not enabled is not supported in SoftMotion. If enabling before homing is not an option, an alternative might be controller based homing using MC_SetPosition. Best regards, Georg
Last updated: 2025-09-08

Post by pernockham on Control for linux SL, 4.14.0.0 -> 4.15.0.0 breaks web page access. URL requires authentication ^{CODESYS Forge talk (Post)}
Ok, seems user management is enforce from versions later than SP14, is that what I see with 4.14.0.0 -> 4.15.0.0 and later (?)
Last updated: 2025-09-09

Post by pernockham on Control for linux SL, 4.14.0.0 -> 4.15.0.0 breaks web page access. URL requires authentication ^{CODESYS Forge talk (Post)}
After enabling user management, then reverting to "legacy mode" for visu, the web is responding again also for versions later than 4.14.0.0.
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
The structure should be the same independent of which runtime version. Im using Codesys control for linux SL. Ie, add an ethernet device, then profinet controler then phoenix PN bus coupler.
Last updated: 2025-09-09

Post by ranadheer on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
Thankyou TimvH ,while searching in every device about the component it is same like above screenshot,and i crosscheck with the device repository but devices are available here.
Last updated: 2025-09-09

Post by pernockham on PHOENIX CONTACT Axioline PLCnext project in CodeSys SodftPLC ^{CODESYS Forge talk (Post)}
You should use PLCnext if your device-hw is a PLCnext-un it. As I understand it you are using "CODESYS Control Win V3 x64".
Last updated: 2025-09-09

Post by ahmedbadawi10 on Codesys Trend Problem ^{CODESYS Forge talk (Post)}
I have control win v3 with simulation and a small program with function to convert analog values to percentages, I need to show these percentages in a trend chart, but nothing is shown in the trend as you see in snips attached! thanks in advance
Last updated: 2025-09-16

Post by pernockham on Pointer/reference to Codesys trend recording object? ^{CODESYS Forge talk (Post)}
I have a Hmi that acts as an interface for many (mostly identical) units. This is managed by a sort of "mux" where you select which unit that should be presented on the HMI. Backbone is solved by a HMI-gvl defined as reference/pointer to "unit-data", which then can be set to the individual units. While this works for most data I still have not sorted how to solve this for the trend recordings. One solution would be to have already "mux:ed" data values as source for the/one trend. However then the trend would contain data from different units/sources which could/will cause confusion. If its possible to "clear" this can be mitigated. Possibly let the trend have its own "mux-selector" (ie, the hmi are focusing on unit#3 however trend data is locked on unit#5), that could also work.. Or, let each unit have its own trend recording, which is focused if the unit is "selected". Can I reach the trend recording objects programmatically (those defined in the device tree)? Ie, can I use a "reference/pointer to these trend recording objects"? There is a field "data source" in the trend properties dialog which seems to resemble what Im looking for? But Im not sure if I can use it in some way, I cannot change anything in this field it only says <local application="">. </local>
Last updated: 2025-09-16

Post by reinier-geers on sysproces create out of V 3.5.20.5 ^{CODESYS Forge talk (Post)}
Ive update a project 3.5.9.2 to 3.5.20.5 but now im missing parts of a library. Sysprocess. Sysprocesscreate Where can i find it ?
Last updated: 2025-09-16

Post by dkugler on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
if this happens I go to --> Build --> Generate code then there exists a IDE Code and a PLC/API code and comparison before download is possible. Give it a try?
Last updated: 2025-09-18

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi gseidel, Thanks a lot. My softmotion is 4.18,so the SM3_Basic version is 4.18 by default. When I change the version of SM3_Basic to 4.17,complie works good then. Thank you for your kindness.
Last updated: 2025-09-22

Post by zatalian on codesys installer 2.5.0.0 ^{CODESYS Forge talk (Post)}
Is it just me, or is the option to import a configuration file for the add-ons missing in the new version of codesys installer?
Last updated: 2025-09-24

Post by gseidel on Arcs intersection ^{CODESYS Forge talk (Post)}
Hi blitz, the G1 sentences N50, N70, and N110, which have length 0, lead to a stop of interpolation between the arcs. If you remove these lines, SMC_SmoothPath works (I tried it). Bst regards, Georg
Last updated: 2025-09-24

Post by jzhvymetal77 on Special Chars in Visualizationfor QR code string ^{CODESYS Forge talk (Post)}
Ok I'm closer as I switch using WSTRING but in Visualization it does not respect LINE BREAKS. Instead it shows $n. See attached image.
Last updated: 2025-09-29

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
add the Container serial number this is usually 130-xxxxxxxx and last row the license ticketnumber which you got from the CODESYS Store order
Last updated: 2025-10-01

Post by gseidel on The default ramp type selection in SoftMotion V4.18.0.0 is Quadratic ^{CODESYS Forge talk (Post)}
Hi imdatatas, thanks for your detailed and thoughtful feedback. We will discuss the topic in our team. Best regards, Georg
Last updated: 2025-10-02

Sort by relevance or date