How to change keyboard layout on the virtual keyboard? ^{CODESYS Forge talk (Thread)}
How to change keyboard layout on the virtual keyboard?
Last updated: 2025-09-18

Post by dkugler on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
if this happens I go to --> Build --> Generate code then there exists a IDE Code and a PLC/API code and comparison before download is possible. Give it a try?
Last updated: 2025-09-18

Post by chris--o on ModbusTCP RaspberryPi zu Fronius Wechselrichter ^{CODESYS Forge talk (Post)}
Danke probier ich mal aus! Sorry für die späte Antwort.. War im Urlaub und hatte den Post hier wieder verdrängt.
Last updated: 2025-09-19

ModbusTCP RaspberryPi zu Fronius Wechselrichter ^{CODESYS Forge talk (Thread)}
ModbusTCP RaspberryPi zu Fronius Wechselrichter
Last updated: 2025-09-19

Post by gseidel on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi liai, is it possible, that SM3_Basic is missing in the library manager? (It should be inserted automatically when adding a Cam table, along with the other motion libs.) You can add it manually and see if that solves the compile errors. Best regards, Georg
Last updated: 2025-09-19

Draw Commands ^{CODESYS Forge talk (Thread)}
Draw Commands
Last updated: 2025-09-19

download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Thread)}
download project via codesys is slow but tftp/ftp/iperf is fast ??
Last updated: 2025-09-20

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
Setup description CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by gaglios on Raspberry Pi 5 GPIO not working. ^{CODESYS Forge talk (Post)}
Is there anything new? On the licensing page it says that Raspberry Pi 5 GPIOs are not yet supported.
Last updated: 2025-09-20

Raspberry Pi 5 GPIO not working. ^{CODESYS Forge talk (Thread)}
Raspberry Pi 5 GPIO not working.
Last updated: 2025-09-20

download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Thread)}
download project via codesys is slow but tftp/ftp/iperf is fast ??
Last updated: 2025-09-20

Persistent Vars ^{CODESYS Forge talk (Thread)}
Persistent Vars
Last updated: 2025-09-22

Post by durallymax on Persistent Vars ^{CODESYS Forge talk (Post)}
Looking for a better way to manage Persistent Variables. We tend to have local vars in our FBs that need persistence through downloads as the systems are updated/altered on a regular basis. Retain would suffice if we had an easy mechanism to backup and restore like we can with Persistent variables and recipes. Although not having to remember that step with Persistent variables is preferred. We're running into issues with persistent storage capacity (WAGO PFC200) using the Persistent variable list (and adding all instances). It appears there are many ways to handle this, some with recipes, some with files, others with application manager. Is there a solution that exists that is as simple as declaring as Persistent and managing elsewhere? Or do we need to move onto periodically writing CSVs?
Last updated: 2025-09-22

Post by liai on can not new a cam table in codesys V3.5 SP20 ^{CODESYS Forge talk (Post)}
Hi gseidel, Thanks a lot. My softmotion is 4.18,so the SM3_Basic version is 4.18 by default. When I change the version of SM3_Basic to 4.17,complie works good then. Thank you for your kindness.
Last updated: 2025-09-22

CAnopen stack ^{CODESYS Forge talk (Thread)}
CAnopen stack
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

Post by reinier-geers on CAnopen stack ^{CODESYS Forge talk (Post)}
Ive got a project with 6 devices . Version 3.5.9.2 Now i change one to a other device 3.5.20.40 So i update the project to V3.5.20.4 Now i have a lot off faults in the canopendevices . Somehowe the first has no problem and seems that the canopenstackts stays in V3.5.9.2 the others in V4.2.0.0 But i cant put it back to 3.5.9.2 WHY ? And how can now witch one i can update and witch one not ?
Last updated: 2025-09-22

CAnopen stack ^{CODESYS Forge talk (Thread)}
CAnopen stack
Last updated: 2025-09-22

Post by pernockham on Engineering IDE from linux? ^{CODESYS Forge talk (Post)}
An update note. Still using linux/Qemu. Still happy, but sometimes some things are harder. I lost the "bridge" connection to my VM (meaning for instance I couldnt "scan network" and find local units. Have spent tons of hours to find out why. Finally it seems the traffic got blocked by the firewall/iptables so needed to set rules for that. So friendly note that rules must allow forward traffic to/from you configured host bridge device.
Last updated: 2025-09-22

Post by bmatlove on AXIS_REF_SM3 Error Codes? ^{CODESYS Forge talk (Post)}
I'm trying to firm up alarming of axis faults. Declutter the code and figure out what's what. Diving into it, I see the AXIS_REF_SM3 function block provides uiDriveInterfaceError and dwErrorId, but I can't find any significance of these further than Drive interface error number Parameter number: 1014 and Drive specific error identifier, parameter number: 1031, respectively. Is there some corresponding appendix I could use to decode these? Also, is there any relation to the Error ID (of type SMC_Error) of the MC POUs? MC_Jog, MC_Reset, MC_MoveRelative, etc? If so, are the above errors redundant? Thanks in advance.
Last updated: 2025-09-22

Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Thread)}
Opaque NodeId in the OPC UA server
Last updated: 2025-09-22

Post by beavel on Feature Request: Text List Formatting ^{CODESYS Forge talk (Post)}
Hi everyone, I'm working on a multilingual help system within a CODESYS visualization project and have run into a limitation with the current text list (.tlx) functionality. Right now, text list entries only support plain text, which makes it very difficult to format longer help texts in a readable way. For example, I’d like to: Use bold headers and larger font sizes for section titles Display variable names or keywords in italics Avoid having to split content into dozens of separate entries just to apply different styles This becomes especially unmanageable when supporting multiple languages — duplicating layout logic across languages is not scalable. Would it be possible to implement a Markdown text functionality for text list entries ? For example: #Header ##Sub-header 1.ordered 2.list 3.fun 4.times Alternatively, is there any existing workaround or planned feature that allows for styled text blocks without fragmenting the content? Thank you in advance and have a nice day :)
Last updated: 2025-09-23

Feature Request: Text List Formatting ^{CODESYS Forge talk (Thread)}
Feature Request: Text List Formatting
Last updated: 2025-09-23

Post by eschwellinger on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
We have tested this and it had worked at that time with China. which device is it? Anything special?
Last updated: 2025-09-23

Sort by relevance or date