Post by keith on Ethernet Adapter issues ^{CODESYS Forge talk (Post)}
I uploaded this project and it was running. After upload I had to re-download to get the system to sync up. I now have this fault and am not sure how to resolve it.
Last updated: 2025-08-14

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
I have successfully activated a CODESYS Control Performance M on a Linux IPC. When I try to activate the CODESYS Visualization M license it fails with this error. Any ideas? This is a WAGO 752-9401 FW4, running Debian 12.
Last updated: 2025-08-21

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
This is what is on the device, is this correct? I did not see an option to install TargetVisu, is this needed?
Last updated: 2025-08-21

Post by franciscocuevas on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
I have the same problem, have you resolve?Are you conected by wifi or ethernet?I was fighting 4 days and I decide to leave.
Last updated: 2025-08-24

Post by wagokurt on TargetVisu option missing in IDE ^{CODESYS Forge talk (Post)}
Thank you, so "Remote TargetVisu" is the same thing as "TargetVisu"? I think there needs to be more documentation about this, its very confusing.
Last updated: 2025-08-25

Post by gatto on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Sandro, did you find any solution? I'm in version 3.5.20.40 and i have only one modbus channel. I don't want the problem to happen to me if I do an update one day.
Last updated: 2025-09-01

Post by ahmedbadawi10 on Codesys Trend Problem ^{CODESYS Forge talk (Post)}
I have control win v3 with simulation and a small program with function to convert analog values to percentages, I need to show these percentages in a trend chart, but nothing is shown in the trend as you see in snips attached! thanks in advance
Last updated: 2025-09-16

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by hoptopgunhop on IP-Change not alloed on this adapter ! PN-Device will operate with limitations. ^{CODESYS Forge talk (Post)}
I am using TX700s as a communication device with S7-1200 and am having the same problem. Can anyone help me solve this problem.
Last updated: 2025-10-05

Post by voffi on Creating Symbol Config File from Python ^{CODESYS Forge talk (Post)}
Hello! One can create a symbol config entry in CODESYS by using create_symbol_config in a python script. Is there a way to create the xml symbol config file (!) from within a python script without going online? Thank you!
Last updated: 2023-12-12

Post by lostcontrol on Using a USB barcode scanner with CoDeSys ^{CODESYS Forge talk (Post)}
Hi, Has anyone actually got this working? Is there any easy way to find the old forum files, as these links only open current projects..
Last updated: 2023-12-14

Post by trycyclepower on How to transfer data from DINT to Union(16 Bools) which I need to use in Few FBs ^{CODESYS Forge talk (Post)}
I have DINT data from drive input and would like to use this data in Bools in bunch of the FBs. I have tried using Union but it is not working. Please suggest
Last updated: 2023-12-14

Post by reinier-geers on Softmotion general ^{CODESYS Forge talk (Post)}
Hi, Im busy using softmotion. But its reading data , but no respons on the commands. Most examples has Softmotion General exis pool. How can get that?
Last updated: 2023-12-19

Post by yelshebani on Add device greyed out ^{CODESYS Forge talk (Post)}
Hi Add device is greyed out, havent connected to the PLC yet. what do I need to do to have ability to add devices, I want to add a Modbus TCP Master device
Last updated: 2023-12-19

Post by reinier-geers on Add licence ^{CODESYS Forge talk (Post)}
Hi I want to add a licence. I dont have the dongle jet. I tried a Stick. I dont see a Container. My Controler deliverer Dont put a motion licencens because its to expensive. How can i add a licensens?
Last updated: 2023-12-28

Post by apurv on Cannot pass array of constant size to a function as a reference ^{CODESYS Forge talk (Post)}
okay but will this pass the array by copying it or it will be a reference to original array only.
Last updated: 2024-01-09

Post by eschwellinger on function block output ^{CODESYS Forge talk (Post)}
not sure on which plc you are - there might be the option with: https://forge.codesys.com/drv/sm3raspistepper/home/Home/ but it is more or less Pi restricted and need additional hardware too I guess.
Last updated: 2024-01-09

Post by daniloc on CODESYS Development System V3 installation auf unter Parallells Windows 11auf MAC PRO M1 ARM Prozessor ^{CODESYS Forge talk (Post)}
I have the same problem ! Any suggestion is welcome. I would like start with MAC Book M3 with VMWare or parallels and windows 10/11...
Last updated: 2024-01-11

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thansk
Last updated: 2024-01-12

Post by simotion on Multiple Ethercat masters on one IPC ^{CODESYS Forge talk (Post)}
Our IPC has multiple seperate ethernet ports. Is it possible to have two ethercat masters on the IPC (on two different ehternet ports off course)? If so, is there documentation available on this, or are there watchouts? Thanks
Last updated: 2024-01-12

Post by irshad01 on data area too large ^{CODESYS Forge talk (Post)}
Hi I have a problem regarding the codesys 2.3 software. How can I run into simulation mood if it say that data area too large when login. How do I resolve this issue
Last updated: 2024-01-17

Post by peter-skokanek on Rpi install runtime licence on SP13 ^{CODESYS Forge talk (Post)}
Hi, In fact, I reinstaled OS from the latest version Bookworm to older Booster and everithing works OK. Anyway, can somebody know when will be available new version of runtime 4.11.0.0?
Last updated: 2024-01-18

Post by hfelek on *SOURCEPOSITION* App = [Application] area=0, offset = 0 on default example ^{CODESYS Forge talk (Post)}
Is this forum viewed by any officials? What must be the priority of topic to get answered? There is not even a brief answer.
Last updated: 2024-01-18

Post by theo on Forget liscence on raspberry ^{CODESYS Forge talk (Post)}
Hello everyone, I installed my liscence on my raspbery but I can't reactivate it after installing it on a new SD card because the old one was broken. I get an error message 10957.
Last updated: 2024-01-25

Post by masmith1553 on C0564 Warning Message ^{CODESYS Forge talk (Post)}
Hello, After updating from SP18 to SP19 I am receiving multiple C0564 warning messages after I compile. Does anyone know how to fix the warnings?
Last updated: 2024-01-25

Sort by relevance or date