Post by micik on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
That really depends on this third party software you want to use. It is possible that .xml file generated with "Generate EtherCAT XML" will not be recognized as valid ENI file. Anyway, "Generate EtherCAT XML" command is not available through standard menus and needs to be added via Tools->Customize and then Add Command. You'll find it under "Devices" section. If you provide more info, we might be able to help you further.
Last updated: 2024-08-09

Post by carohe on %t SystemTime in Variable ^{CODESYS Forge talk (Post)}
Hello, if you enter %t as a "Text" on a rectangle and do not link a variable in "Text variable", it automatically displays the system time. My question is, where do if find a variable, that contains exactly this time? I tried numerous variants using GetLocalDateTime or GetSysTime but I always have to manage timezones myself (which I do not want to do). I only want a variable with the date an time from my windows system, where the visualization is running. Where can I find this variable?
Last updated: 2024-08-20

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by anuj9326 on OPC-UA Client connection, Linux SL /Raspberry Pi ^{CODESYS Forge talk (Post)}
hello edwin i have did the same and i could connect the opc-ua server but i dont see anything in the resources tree, in the application i linked my variables to the symbol configuration but i dont see that in the uaexpert. if i use the same application with a non linux system i can get those variables values and see the complete tree structure. What could be the problem ?
Last updated: 2024-08-21

Post by mini-developer on Precompilation Error NBS.UDP_Peer ^{CODESYS Forge talk (Post)}
Hello, I use the Library NBS from "caa net base services". After opening the Project i get 19 errors from the message window "Precompilation", most of them because it doesn't recognise a component of the FB "NBS.UD_Peer". (see photo) After compiling the Project at least 2 times, there are no errors. Is there a reason and solution for this behavior? Is there a problem with resolving the library? Thanks for any clue
Last updated: 2024-08-23

Post by paulpotat on cm4 runtime problem ^{CODESYS Forge talk (Post)}
It looks like it works with 4.13.0.0 indeed. However when installing the runtime, it's not possible to select the multicore option (see attachment). But once the 4.13.0.0 runtime is installed, the logs seems to indicate that the runtime is running in multicore mode. Looking at "htop" output, it seems like it actually is running on multiple CPU. This is very misleading, is it normal or is this a bug ? Thank you for your answer @eschwellinger, BR
Last updated: 2024-09-02

Post by dkugler on TargetVisu Freezing ^{CODESYS Forge talk (Post)}
The only weird situation i remeber with particular or complete frozen target visu was after the rtc clock was fallen or set back to the past. It looked like after running a while the alarm history database crashed during writing entries at a date lot of years in the past. After setting the rtc clock to actual date/time and deleting the alarm db every thing worked fine. I don't know, if this is/was a problem of our PLC hardware/firmware? Maybe check date/time at your system?
Last updated: 2024-09-13

Post by jinlee on Camera RTSP Feed ^{CODESYS Forge talk (Post)}
Hi, I followed your guidance and used go2rtc. There is a link generated from go2rtc I can copy into the web browser element in the visualisation. It somehow only appear within the software when it is running, but not on the webvisu. I want to display the camera feed onto the webvisu. My camera is reolink 810a which supports IP protocol. My project is pretty simple, just a web browser element with assigned URL.
Last updated: 2024-09-17

Post by andrebrandt on FB string and naming ^{CODESYS Forge talk (Post)}
Hi all. I have a FB written in ST. FUNCTION_BLOCK NTC10k VAR_INPUT Syst:STRING; In:REAL; END_VAR VAR_OUTPUT Out:REAL; OTag:STRING; Out_St:Struct_NTC10K; END_VAR VAR Tag:STRING; InstanceName: STRING; Structure:Struct_NTC10K; END_VAR What i'm trying to do, is to pass data to structure. In structure i want to add a tag with systemnumber and sensorname. '320.001-RT401' In pou i use this RT401: NTC10k;, and tried this RT401: NTC10k(Tag:='RT401'); Anyone done this?
Last updated: 2024-09-26

Post by timvh on Communication between applications on same device/controller/runtime (Win RTE 3.5.20.20) ^{CODESYS Forge talk (Post)}
The RTE will take the RTE license. The HMI will take the HMI license. For the Application Based Licenses, the Runtime will take the smallest which is required. So if you have an application running EtherCAT and no visualization, only the Control with support for EtherCAT is used. If you have another runtime which requires the visualization, it will take the smallest Control license which is required and available + the smallest visualization license which is required.
Last updated: 2024-10-01

Post by ricardoteles97 on Trends Error: TrendStorageAccess: prvCheckForSizeLimit ^{CODESYS Forge talk (Post)}
Hello, I currently have my trend configured with a maximum size limit of 5MB (additional settings can be seen in the attached image). However, I am encountering an error related to this trend, specifically within the TrendStorageAccess library. The device log shows the following message: TrendStorageAccess: prvCheckForSizeLimit (see the attached image for details). Does anyone know the reason for this error? Additionally, where can I find more information to troubleshoot this issue? Thanks in advance!
Last updated: 2024-10-16

Post by winki on Modbus TCP & RTU with Control for Linux SL ^{CODESYS Forge talk (Post)}
Hello, Today I am able to test ma industrial computer in my test bench. I am able to do all the configuration throught my VPN, 100% remote. I can see the gateway & the Virtual PLC. Now I would like to do some Modbus TCP Client & Modbus RS485. But I am lost due to docker ! When I go to modbus TCP it only gave me the docker network, but not my eth0 & eth01 When I go to modbus rtu, how can I create the link between Com number & my /dev/ttyRS485 Loic,
Last updated: 2024-10-23

Post by pernockham on Persistence Manager: Config File not found? ^{CODESYS Forge talk (Post)}
Trying to utilize the persistence manager, but system do not write to file and do not create the config file. System is a Linux SL, version 4.13.0.0 Problems with persistence/config started when I had other problems to go online, I deleted the config file and the persistent files, but the system will not re-create them. I have tried to remove/re-install the "PersistenceManager"-module, create the folder-structure myself. And also reinstall the linux-runtime but its clearly not working. Any help appreciated.
Last updated: 2024-10-31

Post by jddaigle on TargetVisu controls are incorrectly positioned ^{CODESYS Forge talk (Post)}
Hello, I'm trying to run TargetVisu on my Linux IPC, and while it does work, the controls are misaligned compared to my WebVisu. Both visualizations are full-screen on a Debian 12 VM with a resolution of 1280x768. The WebVisu is running in Firefox. Are there any configuration I should adjust to ensure the controls align properly between the two? Any guidance or troubleshooting tips would be greatly appreciated! Thank you.
Last updated: 2024-11-03

Post by s1ack on PFC200 Will soft-container & IIoT license survive a firmware update? ^{CODESYS Forge talk (Post)}
I have an IIoT License activated on a PFC200 with older firmware 2.08.32 (11). If I flash it to the latest available 4.05.10 (27) does the license get destroyed? I have a back up file '3SLicenseInfo.tar'. But this looks quite a bit different form the backup I got from more modern firmware... 'CMLicenseNew.WibuCmRaU'. Can the new license manager restore it from the old .tar?
Last updated: 2024-11-12

Post by amy123 on JSON Utilities ENUM to STRING ^{CODESYS Forge talk (Post)}
Hello, Is it possible to get the string returned from the ENUM JSONType? I read that with regular enumerations you can add '{attribute 'to_string'}' and access it. However, this is from the compiled library, so I can not add that attribute. When I try to use TO_STRING(JSONType) it returns the integer as a string. Ex. jsonType :=TO_STRING(pJSONData^._aJSONData[i].eType); gives '8' instead of NONE Thanks!
Last updated: 2024-12-09

Post by bruno-roth on Read "Homed" status from EtherCAT drive ^{CODESYS Forge talk (Post)}
Hello, the information if your axis is already homed you could only find out direct from your Slave. In DS402 status there is no Bit defined. But some manufacturer of Drives use some optional bits or status. E.g. if you have Schneider Electric LXM32 Servo you will find this information in Bit 15. You have to check the manual of your used Servo-Drive f this information is provided in any object and then read it out with SDO.
Last updated: 2025-01-08

Post by teichhei on The selected container ... does not fit your ticket ^{CODESYS Forge talk (Post)}
Update, installed 3.5.19.70 with the same result. The error message is as useful as a chocolate fire guard. The container SN is in the 130-xxx range which should work. The Version, Chip, Rev number don't mean anything to me. There is no SD Card installed. I've also reinstalled a fresh Wago FW22 image, Deployed PFC200 SL and Edge for Linux, still the same result.
Last updated: 2025-01-09

Post by andrebrandt on BACnet dynamic create bacnet object ^{CODESYS Forge talk (Post)}
Hi. I want to create a FB with bacnet objects. FUNCTION_BLOCK PT1000 VAR_INPUT System: STRING; In: REAL; Name:STRING; END_VAR VAR_OUTPUT Out: REAL; Out_St: Struct_PT1000; END_VAR VAR {attribute 'instance-path'} {attribute 'noinit'} Tag: STRING; Instance:DINT; //AnalogInn : WagoSysBACnet.FbAnalogInput_large(1); This works. Objectname is AnalogInn. identifier is 1 END_VAR I want to name object based on FB PT1000. In FB P1000, I want to write eUnits, Name and so on. How can i do this???
Last updated: 2025-01-15

Post by andre-luis on Device diagnosis ( EtherCAT IO card ) ^{CODESYS Forge talk (Post)}
Hi, In our project, it is not rare to have I/O cards issues. I wanted to have a way to check their statuses ( Eg. INIT, OP, PREOP, etc.. ) I was trying to use the GetDeviceDiagnosisInfo method from the IoConfig_Globals, but there is no info available on the Web with a simple example; does someone have a link to some tutorial or anything else ? Kind Regards, Andre.
Last updated: 2025-02-06

Post by wayne-riesterer on Assignment Efficiency - Repetitive Assignment vs IF statement ^{CODESYS Forge talk (Post)}
Hello Can anyone see any problems with constant assignment as in the following statement: Coils[0] := Coils[0] OR (Buttons[0] AND Sensors[0] > 6); Rather than using the more verbose and vertically-larger: IF NOT Coils[0] AND Buttons[0] AND (Sensors[0] > 6) THEN Coils[0] := TRUE; END_IF Also, is the test expression short-circuited in the latter case? In other words, will the runtime move on after it sees Coils[0] = FALSE AND? Thanks
Last updated: 2025-03-07

Post by nz-dave on ethercat softmotion axis error ^{CODESYS Forge talk (Post)}
Hi all I'm having a little trouble get my axis to work. i can turn them off and on. i can run each servo manually inputting directly to the mapping address. as soon as i try to use any FB's like jog etc my servos wont move and error out. so far I've had error "SMC_ERROR.SMC_DI-POSITIONLAGERROR" and another one about not calling a fb. cheers. in the attachment I have just jogged X_Axis with the MC_JOG FB
Last updated: 2025-03-10

Post by konstantinoskr on AXIS Rollover ^{CODESYS Forge talk (Post)}
The MC_Home or MC_SetPosition requires a programm cycle to be completed. In my application the speed is approximately 120m/min and the programm cycle is 2ms. That means that i will have a 4mm loss on each Trigger of either MC_Home or MC_SetPosition. The best option is to change the value defined in the axis configuration. I tried the SMC_SetMovementType but it only works with the axis standstill or powered off. I need to be able to change it while the axis is moving.
Last updated: 2025-03-12

Post by atone on Set DeviceID of an IO-Link Sensor at Runtime ^{CODESYS Forge talk (Post)}
I need to be able to change (set) the DeviceID of an IO-Link sensor (see DeviceID.png) at runtime. I tried with both ProfinetCommon.PN_PortConfiguration and ProfinetCommon.IOL_PortConfiguration, but I get an error for both when I try to read the port configuration (see PN_PortConfiguration.png). Does one of those FBs is the right one for my purpose? Do I possibly make a mistake when assigning the parameter IOLD_ID/IOLM_ID?
Last updated: 2025-03-19

Post by simone on Preferred way of managing Ip-adress/es for linux (debian) host? ^{CODESYS Forge talk (Post)}
Hi pernockham, I think you should ask your device vendor. For some time I used one from an Italian company where they had made a library where you can manage the ip with a function (something like SetIPAddr...), it was based on connmann on linux. From my little experience is better to use the "default" way, so for me is to manage the config file on interfaces or use the ip addr utility
Last updated: 2025-03-24

Sort by relevance or date