Post by alexgooi on Codesys virtual control redundancy ^{CODESYS Forge talk (Post)}
Dear Forum, I’m currently investigating the possibilities of Codesys virtual control (Linux). The research rig consists of a PC (Debian with real time kernel) with a docker server installed on it. The PC is communicating with a Remote I/O and I have to say the performance is great. The process in the container is running (soft) real time. Currently I’m checking if it is possible to replace physical controllers by remote I/O’s and run the Codesys applications on a docker server. If I’m going into this route the reliability of the server is very important (server down, complete installation down), is it possible to make the server redundant without needing 2 separate containers (including licenses), and maintaining the real time behavior? I’m not only expecting direct answers, if you have any idea or thought they are very welcome. Kind regards Alex
Last updated: 2025-09-03

Post by russmann on Bitmap image in the codesys visualization doesn't show up in web visu ^{CODESYS Forge talk (Post)}
Bitmap Image (outlined in Red in attachment) with it’s configure window open in Codesys 2.3.9.55. Image doesn’t show-up in on-line Web Visu (this project only). No problem with bitmap images in all other codesys 2.3 projects. Web visu in Internet Explorer since 2.3 Web visualizations don't work in Edge.
Last updated: 2024-11-12

Post by kbucsit22 on Ethercat Slave - Load PDO From Device ^{CODESYS Forge talk (Post)}
Hi All, I am using Control Win V3 x64. Anyone experiences to use Expert mode to map the Ethercat Slave device to press this Load PDO from Device, Pressed first time then nothing happens. Pressed second time then the software crashes. Best regards, Kenneth
Last updated: 2024-10-22

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Post by talhaali on Control Win one instance at a time ^{CODESYS Forge talk (Post)}
I want to open one instance of runtime to be opened at a time even I hit multiple times? How can I implement it?
Last updated: 2024-10-25

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
I'm still having issue with this. I have the same code between my IDE and the runtime but I cannot connect because there is no download time indicated on the IDE side. Please Codesys how to solve this ?
Last updated: 2024-12-03

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hello, Codesys team, please can I have an explanation? It's frustrating and complicated on production machines to have to reload the entire program even though it's identical, just because of this missing information. How the information 'Download time' is saved?
Last updated: 2024-12-11

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hi, I have a Combivis studio 6 licence. What I need is information from Codesys about how the information 'Download time' is saved and if it is possible to modify it manually.
Last updated: 2025-02-10

Post by fleaplc on Symbol Configuration to be Build every time! ^{CODESYS Forge talk (Post)}
I'm using Symbol configuration to share PLC variables with SCADA via 3S protocol (Symbol File). All is working fine except every time I open the project.. then I need to rebuild Symbol Configuration! Why?
Last updated: 2025-05-23

Can a table be used as an input to date and time variables on a function block diagram? ^{CODESYS Forge talk (Thread)}
Can a table be used as an input to date and time variables on a function block diagram?
Last updated: 2022-09-15

Can a table be used as an input to date and time variables on a function block diagram? ^{CODESYS Forge talk (Thread)}
Can a table be used as an input to date and time variables on a function block diagram?
Last updated: 2022-09-15

I create python script Upload my script online to controller each time I get the password dialog ^{CODESYS Forge talk (Thread)}
I create python script Upload my script online to controller each time I get the password dialog
Last updated: 2020-09-25

Post by snhatton on Visu - changing auto-logout time ^{CODESYS Forge talk (Post)}
You could try using the VUM_UserGroup struct from the VisuUserManagement library. I haven't tried this, but there is a variable for tAutoLogout to set the logout time.
Last updated: 2023-12-11

Post by alink on Visu - changing auto-logout time ^{CODESYS Forge talk (Post)}
decleration: fbVisuUserMgmt : VisuUserManagement.VUMUserGroup; bAutoLogOff : BOOL; tAutoLogOffTime : TIME; wstGroupName : WSTRING; code: fbVisuUserMgmt.wstGroupName := wstGroupName; fbVisuUserMgmt.xAutoLogout := bAutoLogOff; fbVisuUserMgmt.tAutoLogout := tAutoLogOffTime; Tried it that way. But how to execute? Doing fbVisuUserMgmt() dosn't work. Maybe silly question, but I'm a bit unexperienced
Last updated: 2024-02-07

Post by jetme on Rampup and rampdown ^{CODESYS Forge talk (Post)}
i'm using FB Ramp_INT function to ramp my pump up and down but I will like to ramp up at a different time and also ramp down at a different time. How can I do that.
Last updated: 2024-03-28

Post by daanyouknow on Using a raspberry pi and NVLs to log variables outside of Codesys ^{CODESYS Forge talk (Post)}
Hi, My PLC/controller doesn't support OPC UA, so my current plan to create a ringbuffer/circular logger is to connect a raspberry pi to it, use the Network Variable List receiver and sender and raspberry pi codesys runtime to get the variables to the raspberry pi, after which I will use the pi which DOES support OPC UA to get the variables to a python program which logs the desired variables for a certain amount of time for me, would this work? I don't want to spend 50+ euros + licencing fees for a solution that might not work.
Last updated: 2025-11-14

Post by macman on Codesys 3.5 OPC UA Client to Kepware OPC UA Server ^{CODESYS Forge talk (Post)}
Hi, I have problem with connecting Wago PLC WAGO 750-8212/0025-0002 configured as OPC UA client to Kepware OPC UA Server. I am using Codesys 3.5.19.70. What I did so far. To the Codesys project I added object Data Source Manager and configured connection OPC UA like below: pic 1 Then I can browse the OPC server tags in “Variables” tab after prior trust on the server side of the client certificate created in the “Communication” tab: pic 2 Additionally second certificate has been created in Codesys for runtime process in “Security screen” as well as the server certificate was approved here: pic 3 But when I compiled project, downloaded it to PLC and go to RUN I can’t read selected in “Variables” tab, OPC Server tags. I am getting such error (ID: 7001): pic 4 All two PLC certificates has been trusted in OPC server (Kepware) side: pic 5 and Kepware server configuration look like this: pic 6 I can easily connect using third party OPC UA client UaExpert to Kepware server without problem. In attachment I added also log from Kepware OPC UA server. pic # - this specifies the number of a concrete graphic from one of the collective in attachment
Last updated: 2025-04-02

Post by vamsi on How to configure gateway for programming RPi 2B using Codesys ^{CODESYS Forge talk (Post)}
I am using a Raspberry Pi 2B. Installed Codesys V3.5.20.1 64-bit and installed 'CODESYS Control for Raspberry PI 4.12.0.0' I am able to install the packages using the 'Update Raspberry Pi' option, but when I try to log into the RPi, in the Device tab it says 'Sacn fail. Please checl that the gateway is running and that its settings are correct'. My setup looks like this. I connected my RPi to my company LAN and also my laptop to company LAN (using HP Docking station). This setup worked when I installed 'CODESYS Control for Raspberry PI', but now I donot know how to configure the gateway. Could anyone please help me in finding what I have to enter in the gateway configuration? Thanks, Vamsi.
Last updated: 2024-07-10

Post by trent on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi All, I use the analysis page in automation server to capture historical trends from my PLC - i only sample one point per hour but it does the job (for now) One issue I have is I often log on to analysis page to find the system has stopped recording trends from my PLC. To fix this, I need to choose "state information" in the "List view" under PLC and click "Reconnect" When I do this I see my variables listed under "parameters" under "PLC Details" start updating again and the trend in Data analyzer continues to update. My Question, Why do I need to manually reconnect? Is there a way to get automation server to automatically reconnect to the PLC so I continue to capture data from the PLC? Regards, Trent
Last updated: 2024-10-22

Post by francescoc on Logger in ms ^{CODESYS Forge talk (Post)}
Hi, I cannot find any documentation regarding the codesys configuration file. I modified this part to have log files saved to disk: [CmpLog] Logger.0.Name=LOGS/PlcLog Logger.0.Filter=0xFFFFFFFF Logger.0.Enable=1 Logger.0.MaxEntries=20000 Logger.0.MaxFileSize=5000 Logger.0.MaxFiles=10 Logger.0.Backend.0.ClassId=0x0000010B ;sends logger messages to SysOut Logger.0.Backend.1.ClassId=0x00000104 ;writes logger messages in a file Logger.0.Backend.2.ClassId=0x00000135 ;sends logger messages as UDP syslog Logger.0.Type=0x314;Set the timestamp to RTC ;Logger.1.Name=/tmp/CommLog ;Logger.1.Enable=1 I need to have milliseconds in the timestamp as well. What value should I use instead of 0x314? Is there any documentation regarding this file? Thank you
Last updated: 2024-03-16

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by kthomas on Cant login to Rpi4 but can see it in codesys communications settings. ^{CODESYS Forge talk (Post)}
I have been struggling for over a week to program my rapspberry pi 4 with codesys. I purchased the license. I installed the runtime and the gateway, and I can see the pi in the communication settings. But cannot log in. I have checked the status of the pi with sudo systemctl status codesyscontrol and it is running. I have enabled traffic to and from the pi with iptables and checked the logs and all looks good. I just cannot connect through the codesys ide. Can anyone help me before I lose my mind?
Last updated: 2024-06-22

Post by patrik on Wish: CODESYSControl.cfg - again ^{CODESYS Forge talk (Post)}
Really good post. I hope that it gets seen by CoDeSys staff. I often find the documentation lacking when it comes to using CoDeSys in more complex ways. If using standard "basic PLC functionality", then it's fine and functions are documented in a sufficient way. Once you go outside of that bubble then I find the documentation not enough. CODESYSControl.cfg is a good example of this. And why isn't more of this integrated in the IDE. like changing port of the webserver. Why is it hidden in this file and not accessible through the IDE. It feels like a layer of complexity purposely left in so you don't change it if you don't know what you are doing. Like the argument is if you have the know-how to find the file you have the know-how to edit it. I find the documentation lacking when it comes to more complex libraries too. Like the element collections library. there is parameters I still don't quite know what they do. I can't find any documentation about them. There is an example project to download from CoDeSys so you can see how you are supposed to set your factories up. I leave some parameters like it is in the example. Should I? I don't know. Does it work. Yes. But I could perhaps create memory leaks if I get something wrong and I don't see that until way later. In the create method of your element factory you have a function called __vfinit and you just have to accept that it works. Why can't I get insight in what it does through documentation? Don't CoDeSys want us to know how these work so we can't use them to accidentally break something? I find the error logging lacking too. I've had the CoDeSys service crash but it doesn't say why. I've seen windows noticing the crash but no error code was sent or error message. Also in my current issue where the application fails to start after power outage. I can see in the log that it fails to load retain in the application as one log entry and application failing to start as another. But why? Why does loading the retain fail? give me more information! Is it just a skill issue with me? I don't know. If it is then I'd still want CoDeSys to step up their game when it comes to documentation. I'm sorry if a lot of frustration comes though in this post. I really like the product and what I can do with it compared to other PLC brands.
Last updated: 2024-11-21

Sort by relevance or date