Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
The fix for this is when you install the control SL license, there is a checkbox for the Visu S license option. You must click this option. The Visu M is technically an upgrade to the Visu S, if this is license is not installed them the Visu M will fail as shown above. Thanks JoJo for the solution!
Last updated: 2025-08-25

Post by bryandimino on OPC Da Server Code Meter Issues after Enabling License ^{CODESYS Forge talk (Post)}
I'm trying to get the OPC server setup on my machine and currently I'm not having luck. I went ahead and got my license setup. However when I go to run WinCoDeSysOPC.exe I get an error message that I don't have the code meter licenses installed. Does anyone have any ideas on how I can fix this issue?
Last updated: 2024-05-02

Post by rikher on Error: Too few outputs exixts for the box 'MemCopy' (minimum is 1). ^{CODESYS Forge talk (Post)}
I am using MemCopy Function for this example: https://www.youtube.com/watch?v=DeTCT5Vyn28&t=482s It is from library WagoSysPlainMem. I want to use this for an MQTT example. However, Codesys is complaining the block does not have outputs. How to fix this?
Last updated: 2024-06-19

Post by justthefacts77 on How to generate an "ENI" file ^{CODESYS Forge talk (Post)}
An ENI file is needed for a 3rd party software solution that is being used over EtherCAT connection that emulates multiple Slave devices. This one cant be that complex, seen some legacy posts but no answers. Thank you! Bruce
Last updated: 2024-08-08

Post by eschwellinger on PFC200 Will soft-container & IIoT license survive a firmware update? ^{CODESYS Forge talk (Post)}
need to be relicensed. 27 FW has an Wago Runtime for V3. So maybe using this would be an option too.
Last updated: 2024-11-16

Post by reinier-geers on Monitor a Can J1939 ^{CODESYS Forge talk (Post)}
Hi , Can i monitor a other Canbus and use the data ? Ive got a mobile crane. So i want to add a device with an unused adres. Then Read the Joystick and use some buttons for an optional device
Last updated: 2025-01-15

Post by tomw on Soft Motion - PosControl External Encoder ^{CODESYS Forge talk (Post)}
I need to understand how an external encoder ties into the SM_Drive_PosControl setup. I have an application where I have two hydraulic servo amplifiers. The encoder is a Temposonic Linear SSI encoder. How does the encoder get tied back into the SM_Drive_PosControl axis. Thanks.
Last updated: 2025-05-13

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
Setup description CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by flyingsheep on download project via codesys is slow but tftp/ftp/iperf is fast ?? ^{CODESYS Forge talk (Post)}
CODESYS is running on an embedded RTOS. For testing, I use a local debugging environment where my PC is connected directly to the embedded SoC via an Ethernet cable (no switch or router in between).
Last updated: 2025-09-20

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
you need to have an own task for the one wire and io update these slaves in an own low prio task!
Last updated: 2025-10-18

Post by mp9876 on Problem using MeasureFrequence FB ^{CODESYS Forge talk (Post)}
Hi everyone, new at Codesys and PLC programming in general. I am using Codesys Win V3.5 SP20 I would like to measure an encoder's frequency output (obtaining that pulse train from Factory IO) and intended to use the MeasureFrequence FB (Intern/CAA/Utilities/CAA Mathematics/3.5.19.0). As mentioned in the title what I need to measure is low frequency, such as lower than 40hz (a cycle every 25mS) or so; I could even go lower frequency if required as this is for test purposes) therefore I am not expecting problem measuring a low frequency with that FB The library in question appears to be installed as I can retrieve it from the Library Repository. I can also see it from the Device's Library Manager. Problem arises when I am trying to instantiate this particular FB. I go like this: VAR MeasF:MeasureFrequence; END_VAR Please note that as soon as I start typing the "MeasureFrequence", the MeasureFrequence comes out as a viable option in auto-typing; seems to indicate that the FB is recognized somehow. But there is no way I can compile this as it comes back with the following: C0046: Identifier 'MeasureFrequence' not defined. Tried to rename that to ABC instead of MeasF; same issue. Possibly that the library is not properly installed ? Placeholder ? I would greatly appreciate a bit of guidance if possible. Thank you and regards, Mike
Last updated: 2024-06-24

Post by snhatton on Can't open online view of FB instance from code editor, only from Device/POU windows ^{CODESYS Forge talk (Post)}
Good morning, Yes, this is a known bug that has been reported. For now, the only workaround is to open the function block instances from the device tree. Regards, -Shawn
Last updated: 2023-11-08

Post by runtimevictor on virtual plc vPLC configure nics ^{CODESYS Forge talk (Post)}
Hello, When I add 2 nics in vPLC this happens to me..., why is it? If I just put one of the two NICs, the vPLC runtime instance starts running correctly...
Last updated: 2025-02-02

Post by mbart on VAR_INFO from inside of a FB to get info on the instance. ^{CODESYS Forge talk (Post)}
I experienced the same problem: using __VARINFO is working only in PRG context, while it crashes if used inside Function Blocks. I would really appreciate if they would fix this issue
Last updated: 2025-12-04

Using a method called from opcua fill an specific array position ^{CODESYS Forge talk (Thread)}
Using a method called from opcua fill an specific array position
Last updated: 2022-02-18

Establishing communication between a Raspberry Pi 4 and an Arduino UNO R3 using I²C. ^{CODESYS Forge talk (Thread)}
Establishing communication between a Raspberry Pi 4 and an Arduino UNO R3 using I²C.
Last updated: 2023-12-03

UDB Block in Codesys V2.3 implementieren um Werte an bestimmte IP-Adresse zu senden ^{CODESYS Forge talk (Thread)}
UDB Block in Codesys V2.3 implementieren um Werte an bestimmte IP-Adresse zu senden
Last updated: 2024-07-19

setting up Raspberry pi as an opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Thread)}
setting up Raspberry pi as an opc ua Server with UaExpert as Client
Last updated: 2024-09-11

Setting up Raspberry pi as an Opc ua Server with UaExpert as Client ^{CODESYS Forge talk (Thread)}
Setting up Raspberry pi as an Opc ua Server with UaExpert as Client
Last updated: 2024-09-11

SEGV when using an Ethernet_IP_Scanner/Profinet-Master coming from the ETHTOOL syscall ^{CODESYS Forge talk (Thread)}
SEGV when using an Ethernet_IP_Scanner/Profinet-Master coming from the ETHTOOL syscall
Last updated: 2023-08-16

Can any PC with an Ethernet adapter be used as PN_Controller with Codesys? ^{CODESYS Forge talk (Thread)}
Can any PC with an Ethernet adapter be used as PN_Controller with Codesys?
Last updated: 2018-10-11

Rpi Runtime stops after about 16 hours with an Exception with CommCycleHook ^{CODESYS Forge talk (Thread)}
Rpi Runtime stops after about 16 hours with an Exception with CommCycleHook
Last updated: 2023-04-24

How do I pass a array throught a function and return an array - Pointers ^{CODESYS Forge talk (Thread)}
How do I pass a array throught a function and return an array - Pointers
Last updated: 2018-04-16

K-Bus Klemme an Ethercat Slave einbinden. Gerät konnte nicht hinzugefügt werden. ^{CODESYS Forge talk (Thread)}
K-Bus Klemme an Ethercat Slave einbinden. Gerät konnte nicht hinzugefügt werden.
Last updated: 2021-11-28

exporting or copying the COE online data from an ethercat slave device ^{CODESYS Forge talk (Thread)}
exporting or copying the COE online data from an ethercat slave device
Last updated: 2019-10-30

Sort by relevance or date