Post by eschwellinger on EtherCat-Rexroth Drive lost connection or no? ^{CODESYS Forge talk (Post)}
check on EthercatMaster status page if you loose Ethercat frames - and check how the jitter is on Ethercat Master task
Last updated: 2023-10-25

Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Thread)}
Gateway doesn't come online, regarding a working internet connection
Last updated: 2023-10-26

EtherCat-Rexroth Drive lost connection or no? ^{CODESYS Forge talk (Thread)}
EtherCat-Rexroth Drive lost connection or no?
Last updated: 2023-10-25

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved EN: The Problem is that the Codesys Edge-Gateways have a License with a runtime of an half year, as long the Gateways are online they will self renew themselfs. In my Case the RevPi was more than a year offline and so the Edge-Gateway was not working anymore. The solution: I accessed a laptop that was directly connected to the RevPi. I installed the Codesys service tool and renewed the certificate manual. DE: Das Propblem ist das die Codesys Edge-Gatways eine Lizenz haben die nur ein halbes Jahr gültig ist. Solange das Gateway eine Internet verbindung hat aktualisiert sich das Zertifikat von alleine. In meinem Fall war das Gateway aber über ein Jahr offline und hat somit nicht mehr funktioniert. Die Lösung: Ich hab auf einen Laptop von Kunden mit TeamViewer zugegriffen, der Laptop wurde mit Kabel direkt mit RevPi verbunden. Codesys Service Tool installiert und dann das Gatewayzertifikat aktualisiert.
Last updated: 2023-10-26

Post by janber0206 on Gateway doesn't come online, regarding a working internet connection ^{CODESYS Forge talk (Post)}
Solved (see comment) Setup: Kunbus RevPi Connect+ (a raspberry based PLC) Codesys runtime package: 4.5.0.0 (raspberry, armhf) based on Codesys V3.5.18.20 Edge Gateway: 4.5.0.0 (edgearmhf,armhf) EN: The edge-gateway was added over a year ago to the automation server. I now need to make a few changes to the Codesys software, but the Pi is not showing as online in the Automation Server. Internet connection is established, I have remote access to the Pi via RealVNC. Anyone have an idea how I can solve this? Some screenshots added. DE: Ich muss nun ein paar Änderungen an der Codesys-Software vornehmen, aber der Pi wird im Automation Server nicht als online angezeigt. Die Internetverbindung ist hergestellt, ich habe über RealVNC Fernzugriff auf den Pi. Hat jemand eine Idee, wie ich das Problem lösen kann?
Last updated: 2023-10-26

Function block for Ethernet/IP ^{CODESYS Forge talk (Thread)}
Function block for Ethernet/IP
Last updated: 2023-10-26

Post by pascaljt on Function block for Ethernet/IP ^{CODESYS Forge talk (Post)}
Hello, I program a function for an Ethernet/IP controller. I made a structure with input and output corresponding with the map of my controller for the function block. My problem is that I don't know how to do the link between the controller and my PLC (CC 100 from Wago). The addresses declare in Codesys are illogic, The first addresses are 12 and 13 then 7 then 4. How to do corresponding the addresses of the controller and the input / output structure ? IP adress ? Does I must create the all variables of controller with the controller adresses to use with the function block ? Thanks for your help. (I hope I'm clear, I'm not english)
Last updated: 2023-10-26

Post by chiali on Recipe issue. ^{CODESYS Forge talk (Post)}
Hello; Why the same project is working under older versions, like V3.5.14.0, and not in latest version(s). Is it a bug??? Best regards.
Last updated: 2023-10-26

Post by eschwellinger on Recipe issue. ^{CODESYS Forge talk (Post)}
...add Visu Util libraray in the library Manager?
Last updated: 2023-10-27

Post by janber0206 on Lizenz lässt sich nicht aktivieren für Revolution Pi ^{CODESYS Forge talk (Post)}
Ich versuche grade die Lizenz für den Revolution Pi zu aktivieren, das hat auch schon im Laufe eines Jahres 20 mal geklappt, jetzt bekomme ich grade nur die Fehlermeldungen zu sehen in den angehängten Screenshots. Die Aktivierung der OPC-Client Lizenz lief ohne Probleme geht nur um die aktivierung für die Codesys Control for Raspberry Pi MC SL. Ich habe sowohl die Webaktivierung versucht als auch in der Codesys IDE, im Lizenz Manager versucht die Lizenz zu aktivieren. Aktivierung mit Dongle kommt nicht infrage da die bei Endkunden eingebaut werden. Hatte jemand ähnliche Probleme, bzw. weiß jemand wie das zu beheben ist? MfG Jannis
Last updated: 2023-10-27

Post by laruso on Runtime device Enable/Disable procedure ^{CODESYS Forge talk (Post)}
I implemented the parts from the CAA Device Diagnosis Example.project and could use it for switching on and off, the CAN devices that were located under the CANbus and CANopen_Manager. But i can't do the same with I2C_master_test_version or devices below this one. In the example project there is only the EtherCAT Master, CANbus and CANopen_Manager, and Ethernet with devices below.
Last updated: 2023-10-27

Post by chiali on Recipe issue. ^{CODESYS Forge talk (Post)}
High, and Thanks, but how could I guess about this library. Normally it should be added automatically! Thanks again. Best regards.
Last updated: 2023-10-27

CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Thread)}
CSVReaderInit returns error : INVALID_HANDLE
Last updated: 2023-10-27

Recipe issue. ^{CODESYS Forge talk (Thread)}
Recipe issue.
Last updated: 2023-10-27

Post by totorovic on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
We changed the path where the CSV file is. From intern memory of the IPC to a USB key. We still have this error 'INVALID_HANDLE'. We must restart the Codesys runtime to clear it. That is a big problem for us because machine is in production. @eschwellinger What do you mean by "this is a security issue not to read/write in the plc allowed path"
Last updated: 2023-10-27

Post by grant32 on Codesys ARTI .XML file not creating but working. ^{CODESYS Forge talk (Post)}
Hello, I am working on a project with a Beijer Nexto Xpress. I have done this a few times with no issues but for some reason this time when creating a Symbol Configuration the ARTI .xml file is not being created in the Project Folder. However when manually putting the ARTI tags in the HMI program they are connected and work. So I am just not getting the file to import all the tags. I can do it manually which is fine but no matter where the project folder is saved this occurs. Anyone experienced this? Did not see another forum on it.
Last updated: 2023-10-27

Post by simotion on Pointer to Softmotion axis ^{CODESYS Forge talk (Post)}
No ideas?
Last updated: 2023-10-27

Focus/Selection color frame around the element ^{CODESYS Forge talk (Thread)}
Focus/Selection color frame around the element
Last updated: 2023-10-27

Post by masmith1553 on Focus/Selection color frame around the element ^{CODESYS Forge talk (Post)}
Is there a way to control what element is in focus?
Last updated: 2023-10-27

Post by andrax on Mux I2C ^{CODESYS Forge talk (Post)}
Hi, sorry I was not there for a long time. The TCA9548 needs terminating resistors, do you have them in? That's why I went to QWIIC, the muxboard already has them built in. If it still does not work, try it first without the muxboard. PS: Note the channel assignment. Muxboard 0 = I2C_Master 1,0,0,0,0,0,0,0 Muxboard 1 = I2C_Master 2,0,0,0,0,0,0,0 etc.
Last updated: 2023-10-29

Data storage and Export in Codesys ^{CODESYS Forge talk (Thread)}
Data storage and Export in Codesys
Last updated: 2023-10-29

Post by anhkdv on Data storage and Export in Codesys ^{CODESYS Forge talk (Post)}
I am doing a SCADA project on temperature and humidity monitoring system. The customer requested that we store the database through codesys without the need for intermediary software such as MySQL, MSSQL,... and be able to export reports at selected times, reports exported to csv files. , xslm,... Can anyone help me?
Last updated: 2023-10-29

CSV Datei in einem freigegebenen Netzlaufwerk speichern ^{CODESYS Forge talk (Thread)}
CSV Datei in einem freigegebenen Netzlaufwerk speichern
Last updated: 2023-10-30

Post by hgpiepel on CSV Datei in einem freigegebenen Netzlaufwerk speichern ^{CODESYS Forge talk (Post)}
Hallo zusammen, ich erstelle eine CSV-Datei, die im Moment mit file.Write lokal in einem Verzeichnis (/home/pi/Logdaten/logData.csv) gespeichert wird. Jetzt möchte ich die gesammelten Daten aber gerne im Netzwerk speichern. Der Versuch, die Datei unter //Server/Public/logData.csv zu speichern, hat sich so geäußert, dass ein Ordner (Server) im Stammverzeichnis auf dem Pi mit Unterordner erstellt wurde und dort die Datei abgelegt wurde. Gibt es hier eine einfache Möglichkeit, die Datei vom Pi herunter zu bekommen? Leider habe ich im Netz nicht wirklich was hierzu gefunden. Grüße Hermann
Last updated: 2023-10-30

Post by janber0206 on RPI is license server down ^{CODESYS Forge talk (Post)}
I had the same problem. Problem solved: all licences purchased before October 2022 must be updated by Codesys. To do so, simply contact the support in the Codesys Store.
Last updated: 2023-10-30

Sort by relevance or date