Post by tk096 on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi, can you share a project to reproduce the issue? I wasn't able to reproduce it following these steps.
Last updated: 2024-12-19

Post by gseidel on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hi Imdat, thanks for your effort! We could reproduce the error and will fix it in the next release (4.18.0.0). Best regards, Georg
Last updated: 2024-12-19

Post by imdatatas on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Dear @gseidel, Thank you for your response. I will be looking forward to the release of new version. Best Regards, Imdat
Last updated: 2024-12-20

Post by jeroenaero on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
For what it is worth taking into account on version 4.18: Softmotion 4.17 doesn't work with the SMC_TRAFO_Scara2. Very small numbers come out of dA and dB. Going back to version 4.16 solves the issues.
Last updated: 2025-01-07

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by mattplc on Opaque NodeId in the OPC UA server ^{CODESYS Forge talk (Post)}
Same for me. I have problems with UAExpert too. Can't see the Current Value of Enum and can't control. Did some Tests with Python opcua library. Not working with the communication manager so far.
Last updated: 2025-01-09

Post by winki on OPCUA Server With COntrol For Linux Arm64 ^{CODESYS Forge talk (Post)}
Hello, I am wondering if it is possible to have OPCua Server with Control for linux ARM64. Indeed I am not able to add symbol configuration.
Last updated: 2025-01-13

Post by chrisdeloglos on Network Variables not updating ^{CODESYS Forge talk (Post)}
Thanks for the comment. I'm using Weidmueller UC20-WL2000-AC's and changing the broadcast address to match the current subnet this worked for me as well!
Last updated: 2025-01-27

Post by jddaigle on Webvisu not supported due to missing browser feature HTML5-Canvas ^{CODESYS Forge talk (Post)}
I dont know if you all have access to that ticket, but they are looking at the problem. https://helpdesk.codesys.com/servicedesk/customer/portal/16/USS-1073
Last updated: 2025-02-17

Post by smic on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
I found the solution. The NIC information on Deploy control SL should be defined to scan profinet devices. So I moved to the next challenge. Device is founded but still it has orange mark not green.
Last updated: 2025-02-28

Post by eschwellinger on Virtual Control SL Profinet connection ^{CODESYS Forge talk (Post)}
means not licensed demo mode.. use the Licenserver on the host and apply a license and add the Ip of the license server then it will be green.
Last updated: 2025-02-28

Post by ph0010421 on Axis EtherCAT address ^{CODESYS Forge talk (Post)}
Hello SDO will write to the drive, not the axis, so you need to pass in the ethercat slave: VAR_IN_OUT Axis: IoDrvEthercatLib.ETCSlave; END_VAR Then you can get the address with: Axis.PhysSlaveAddr (as UINT)
Last updated: 2025-03-07

Post by timvh on an not create Symbol Configuration in Codesys V3.5 SP20 Patch 4 ^{CODESYS Forge talk (Post)}
Go to the menu Tools - CODESYS Installer. Here you can manage your add-on packages. Go to Browse, find CODESYS Communication and install this add-on.
Last updated: 2025-03-08

Post by liai on an not create Symbol Configuration in Codesys V3.5 SP20 Patch 4 ^{CODESYS Forge talk (Post)}
Thanks a lot, help me understood more of the concept of sodesys software. May you Have a good day!
Last updated: 2025-03-10

Post by julian123 on CodeSysControlWinV3x64 ^{CODESYS Forge talk (Post)}
Hello mos89p, I had the same problem. There is a lot of threads about this, but not one up to date. Your solution worked and I was finally able to use my software again. Thank you!
Last updated: 2025-03-12

Post by xlfll on How to use libdoc to implement libraries in multiple languages ^{CODESYS Forge talk (Post)}
po file to generate translation file mo, how to mo file into lmd file into the compilation library? This is not clearly described in the codesys help. Does anyone know? codesys help:https://content.helpme-codesys.com/en/LibDevSummary/localization.html#deployment-of-translated-documents
Last updated: 2025-03-13

Post by egau on Enable and Disable Project IO programmatically ^{CODESYS Forge talk (Post)}
Hi @eschwellinger, I tried this with Modbus COM slaves. I was able to disable them (slave becomes greyed out in the device tree), but the DED.Reconfigure "eError" output shows "NOT_SUPPORTED". After this, when I tried to re-enable the slave, it did not work (device stayed greyed out in the device tree), and the DED.Reconfigure "eError" output also showed "NOT_SUPPORTED". Is there something to do about this, or the device just doesn't support reconfiguration? P.S: I tried this running locally on my computer (not in simulation mode). So of course I was not physically connected to the devices. I have two similar projects, but one of them doesn't have the Modbus_COM devices. I know I can "Exclude from build" the devices for that project, but I would really prefer not to do this if possible. I would prefer to dynamically toggle a configuration variable that would enable or disable the slaves.
Last updated: 2025-03-14

Post by eschwellinger on Codesys Network driver install for Codesys Control RTE x64 ^{CODESYS Forge talk (Post)}
is this latest Control RTE Version? Strange is that the component does not occure in the list of component to add.
Last updated: 2025-03-18

Post by r-c-r on SM3RaspiStepper 0.0.0.6 issue ^{CODESYS Forge talk (Post)}
Thanks for the replay. My RPI is a 3B+ model with bullseye OS. I don't understand why 0.0.0.4 is working ok and future versions not.
Last updated: 2025-03-22

Post by warrumungi on MySQL problem with connection ^{CODESYS Forge talk (Post)}
5 years later: I'm also having the exact same problem! MySQL Workbench works fine across the LAN, but the codesys library cannot get past this stage... The library authors are not responding on their support email :(
Last updated: 2025-03-27

Sort by relevance or date