Post by martinlithlith on CODESYS Control for Raspberry Pi SL on Raspberry Pi 4b ^{CODESYS Forge talk (Post)}
hi! a quick question - is it possible to run CODESYS Control for Raspberry Pi SL license on a raspberry pi 4b? i know it says all models in the data sheet, but im not sure it the data sheet has been updated seince the MC-processors for pi. best, Martin
Last updated: 2023-09-04

Post by eschwellinger on Correct CAN Driver for EL6751 ^{CODESYS Forge talk (Post)}
Hi, for Control Win : add CmpEL6751CanDrv in the c:\ProgramData\CODESYS\CODESYSControlWinV3x64\E1FA7ABE\CODESYSControl.cfg [ComponentManager] Component.1=CmpTargetVisuStub Component.2=CmpWebServer Component.3=CmpWebServerHandlerV3 Component.4=SysCpuMultiCore Component.5=SysReadWriteLock Component.6=SysCpuBreakpoints Component.7=SysPipeWindows Component.8=CmpEL6751CanDrv for Linux SL or Pi or any ARM device - I think it is already static loaded as component - see plclogger on startup
Last updated: 2023-09-20

Post by callumo1 on Check For Open Dialogs On Client ^{CODESYS Forge talk (Post)}
Is it possible to make a function that checks to see if there are any open dialogs on a given clients. I think VisuDialogs.VisuDlgUtil_IsDialogOpen does this for a given dialog name, but is it possible to do this for any dialog. Appretiate any help Cheers Callum
Last updated: 2023-09-25

Post by callumo1 on Check For Open Dialogs On Client ^{CODESYS Forge talk (Post)}
Thanks for the reply. I want to be able to check if any dialogs are open of any name. I already have a function similar to what you have send but I don't want to have to run it for all the different dialog names. Thanks
Last updated: 2023-09-26

Post by chirag on About byte swap and convert into 16 bits ^{CODESYS Forge talk (Post)}
Hello, I have %QB0 8 high bits and %QB1 8 low bits . How can i swap bits %QB0 and %QB1 for requirment positions in a 16-bit value ? after that i need %QB0 and %QB1 in to 16bits . For that, i need help. Please see attached pictures for your reference. Thanks in advance.
Last updated: 2023-12-04

Post by rschwager on GVL to SHMem ^{CODESYS Forge talk (Post)}
Hallo! Have some any idea to transfer whole GVL to Shared Memory? I also shared REATIN memory to shraed meory for making a Retain Backup System without USP in Linux on a FRAM. For an other Application we want to shared the whole GVL off obne part (e.g. GVL_Test). How cvan I get easy the Size and the Address for meory copy?
Last updated: 2024-07-09

Post by mrrobot on No source code available for this object ^{CODESYS Forge talk (Post)}
Hello, I have this strange error while I am adding an axis to my slave: "No source code available for this object because it is in the compiled library 'sm3_drive_etc_ds402_cyclic' ..... I looked on google/chatgpt but i cannot find a solution for this issue Any help is welcome ! Thanks in advance Mrrobot
Last updated: 2024-07-15

Post by mrrobot on No source code available for this object ^{CODESYS Forge talk (Post)}
Hello, I have this strange error while I am adding an axis to my slave: "No source code available for this object because it is in the compiled library 'sm3_drive_etc_ds402_cyclic' ..... I looked on google/chatgpt but i cannot find a solution for this issue Any help is welcome ! Thanks in advance Mrrobot
Last updated: 2024-07-15

Post by damian177 on Codesys Control for Linux SL ^{CODESYS Forge talk (Post)}
Hi, For many years my application has been running on Raspberry Pi. Now I have ported the application to a PC running with Debian OS with Codesys Control for Linux SL. Most of things works. But some is wrong with serial ports. Firstly , I wonder why /etc/CODESYSControl.cfg in Debian is empty ?
Last updated: 2024-09-08

Post by cakar16 on Looking for BL20-PG-EN-V3, V3.5.11.20 Device Driver ^{CODESYS Forge talk (Post)}
Hi Everyone, I am Karnadi I am looking for device driver for the following Turk devices and version: - BL20-PG-EN-V3, V3.5.11.20 (Turk) - BL20-2RFID-S, V1.1.3.0 (Turk) - BL20-1RS485/422, V1.1.3.0 (Turk) - BL20-4DO-24VDC-0.5A-P, V1.1.3.0 (Turk) - Ethernet, 3.5.11.20 (Turk) Appreciate if anyone of you can share the device driver (config package) above Thanks and Regards Karnadi
Last updated: 2024-10-04

Post by somlioy on CODESYS Control for PFC100 SL Firmware upgrade ^{CODESYS Forge talk (Post)}
Hi We delivered a system with a PFC100 using the CODESYS Control for PFC100 SL runtime a few years back. The system has once been decommissioned and are now to be commissioned again. Back then, there were only single licenses for the runtime. Can I now upgrade the firmware and runtime without purchasing a new license?
Last updated: 2025-02-27

Post by pafarrell on EtherCAT quick start for advanced programmers ^{CODESYS Forge talk (Post)}
It would be great if there was a thread that had some quick-start links for basic how-to. But one that advanced programmers can jump into. I found this video playlist by SoftMotion-Black, which was very, very helpful: https://www.youtube.com/playlist?list=PLkc8m2OD0r9xJyfTiCBb1vuU_d2yBhjZ_ This person has some other great vids like creating your own custom library, which is awesome for OEMS.
Last updated: 2025-05-14

Post by morecoffee on Control for Raspberry Pi 4.17 ^{CODESYS Forge talk (Post)}
I am currently having the issue that Codesyscontrol only runs for 10 seconds on my Raspberry Pi 4. I believe the problem is because the MAC address range is of the Raspberry is 88:A2:9E:XX:XX:XX. When will Codesys Control For Raspberry Pi 4.17.0.0 be released to fix this issue?
Last updated: 2025-08-22

Post by eschwellinger on TargetVisu option missing in IDE ^{CODESYS Forge talk (Post)}
It is not needed to add Targetvisu connector - for using the TargetVisu for Linux. The reason is - TargetVisu for Linux is basically a remote TargetVisu which could connect to any CODESYS plc not only the loacal one - therefore only a Webvisu connector is needed to have it work. & it seems a bug with this anoying update proposal.
Last updated: 2025-08-23

Post by wagokurt on CODESYS Visualization M License Fails to activate on Linux SL ^{CODESYS Forge talk (Post)}
The fix for this is when you install the control SL license, there is a checkbox for the Visu S license option. You must click this option. The Visu M is technically an upgrade to the Visu S, if this is license is not installed them the Visu M will fail as shown above. Thanks JoJo for the solution!
Last updated: 2025-08-25

Post by pernockham on Gateway in China - "Gateway not connected" ^{CODESYS Forge talk (Post)}
Gateway and runtime (Control for linux SL) on a debian linux. Thanks for your check. Good to know. I will probably travel there in about a months time so that will give me better possibility for further testing. (on a side note, I dont get mail-updates on forum-subscriptions, need to check the topics manually)
Last updated: 2025-09-26

Post by snhatton on How to write a for loop in ladder? ^{CODESYS Forge talk (Post)}
Hi there, little late to the party, but you could also use the ST block for in-line ST code and implement a for loop as you normally would. ST Block is super handy if you just need a small amount of in-line structured text code without creating a new POU. Hope this helps!
Last updated: 2025-10-06

Post by arjunk on How to correctly create a device descriptor (.devdesc.xml) for a custom Linux ARM64 PLC in CODESYS 3.5.21.20? ^{CODESYS Forge talk (Post)}
Hi, I’m evaluating CODESYS for our devices. If I buy a standard runtime and the Toolkit, can I create a custom device descriptor so users can select my device (instead of just “CODESYS Control for Linux ARM64 SL”) when starting a new project? Has anyone done this or know if it’s possible? Thanks!
Last updated: 2025-10-07

Post by dhumphries on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
I have a video demonstrating the procedure to install the runtime on a linux device. https://youtu.be/rj0dOhgnGjs?si=OJoA-kgc1saxIweR This demonstration shows how to install the runtime on a X86 based controller, it should be the same for an ARM based device, but you'll need to install the add-in for Codesys control for Linux ARM SL (or the 64 bit add-in.)
Last updated: 2023-12-30

Post by martinlithlith on Raspberry Pi: List of available drivers / libraries ^{CODESYS Forge talk (Post)}
Hi! I'm still on the hunt for drivers for example TCA9548 and a list or somewhere where all devices for raspberry is gathered. as this post is quite old I'm hoping/gussing that there is somewhere where work after 2021 is gathered? Or has the raspberry part if the community slowed down on creating device drivers?
Last updated: 2023-12-31

Post by oscardm on Problem install codesys 3.5.17 SP 30 with Codesys Installer ^{CODESYS Forge talk (Post)}
Hi, I have a problem with codesys installer: if install a package on the codesys 3.5.17 SP17, and i try to install a package, for example SVN package, the codesys installer report the "digital signature expired error". Anyone have an idea for resolution ? Thanks for your feedback
Last updated: 2024-01-12

Post by culius on Codesys Control for Win & WagoApp Bibliotheken ^{CODESYS Forge talk (Post)}
Hey, ist es nicht möglich die WagoApp Biblitoheken in zusammenhang mit dem Codesys Control for Win zu nutzen? Wenn ich so eine Bibliothek im Projekt habe, lässt sich das Programm nicht auf das Device Control for Win nicht laden. Entferne ich die Bibliotheke geht es ohne Probleme. Hat damit schon jemand Erfahrung gemacht? Viele Grüße!
Last updated: 2024-01-31

Post by ronaldcom-pac on Gif in WebVisu ^{CODESYS Forge talk (Post)}
I am looking for some help with using Gifs in the WebVisu of codesys 3.5.18.40 as the model we tried with ladder logic does not animate the Gif and leaves as the first image of the Gif. Is there a way for ST or LL for it to be animated?
Last updated: 2024-02-08

Post by mondinmr on Direct Pointers in IOMapping for EtherCAT with IoDrvEthercatLib.ETCSlave_Dia ^{CODESYS Forge talk (Post)}
Thank you for the response! It's a path I had already considered, however, while it has always worked for me on inputs, it doesn't on outputs, because if I enable the option to update all IOs at every scan, the IO tasks overwrite each other. However, I have found something very interesting which I am posting below.
Last updated: 2024-02-13

Post by markus-huber on CodeSys SVN doesn't work ^{CODESYS Forge talk (Post)}
I installed CodeSys V3.5 SP9 for HY-eVision2 1.18.0.0 and activated the License Keys for SVN and noticed that the "SVN" doesn't pop up when i go on Menu - Project. For some reason the SVN works on CodeSys SP10. I already deinstalled all CodeSys Applications and installed them again but it's the same. Maybe the problem already occurred and someone could help me.
Last updated: 2024-02-20

Sort by relevance or date