Post by brouwyka on JSONByteArrayWriter string result incorrect order ^{CODESYS Forge talk (Post)}
Hi @TimvH, As discussed in our email contact, your example does not actually test/reproduce the bug I am describing: Adding to the JSON builder on later cycles works fine. Your example works because you do the following: 1. You finish the first cycle (xFirst) with adding an object to the array with 2 fields; 2. When the next cycle is triggered (xAdd), you immediately start with adding another object to that array. This works fine as the last thing you did before #2 was the addition of the array and an object to it. To reproduce the bug you should be doing the following instead, as I showed with the code I shared with my first post: 1. Create the array - save the index that is returned; 2. Add an item, either a primitive or an object, to the array; 3. Add an item outside the array (anything: a primitive, a new array, a nested object, etc); 4. Add another item to the array using the index you saved at #1. You will now see, as I shared in my initial post, that the second item is placed completely outside the root JSON object. This also happens to anything else you try to add after step #4: everything after this point will be added outside the root JSON object: the JSON is completely broken. Important to note is that this not only happens with arrays, but also with nested JSON objects. Once you add something outside of a nested JSON object, you can no longer add anything to that nested JSON object, as that causes the exact same bug. This also applies to arrays of objects, so if in your test you had tried adding a new key-value pair to the first nested object in your array after you created the second nested object, you would also run into this bug. It seems that the JSONByteArrayWriter (I haven't tested the other writers in the JSON Utilities SL library, so I don't know if they suffer from the same problem) simply does not handle any JSON fields that add brackets (so arrays with "[" & "]" and nested objects with "{" & "}") well, and closes them prematurely instead of checking if any later JSONElements in the JSONData's array belong to any of these bracketed fields. After reviewing the objects & functions of the JSON Utilities SL library, my guess is that either the JSONByteArrayWriter linearly goes through the array of JSONElements in the JSONData and only checks the diParentIndex of each JSONElement in direct ascending order, OR if it does use the JSONElement.GetChildren(); method, that this method is either broken and doesn't give all children correctly to the writer. Neither explains why everything completely breaks, and you cannot even add to the root JSON object anymore, however, so there is probably more than just that going wrong in the writer. To me, after a full week of testing and attempting workarounds, this seems like a bug in the library that needs to be fixed by Codesys, as I cannot see anything wrong in the JSONData constructed by the JSONBuilder - this seems purely a problem in the writer.
Last updated: 2026-06-15

Post by wallandreas008 on OPC-Server V3 - keine Items zu sehen... ^{CODESYS Forge talk (Post)}
Hallo ich habe ebenfalls Probleme mit dem Verbindungsaufbau zu 3 ABB SPSen nach einem Windows Update. hier meine OPCServer.ini [Server] updaterate=200 publicgroups=0 logevents=1 syncinit=1 PLCs=3 PLC0=PLC1 PLC1=PLC2 PLC2=PLC3 [PLC:PLC1] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC01 reconnecttime=10 waittime=12 active=1 logevents=1 logfilter=0 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_101 parameter0=Address value0=192.168.0.101 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC2] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC02 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_102_ parameter0=Address value0=192.168.0.102 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [PLC:PLC3] interfacetype=GATEWAY motorola=1 nologin=0 timeout=10000 tries=3 buffersize=4800 project=ZE_PC03 reconnecttime=15 waittime=10 active=1 logevents=1 logfilter=10 gateway=Tcp/Ip gatewayaddress=localhost gatewayport=1210 parameters=3 device=Tcp/Ip instance=TCPIP_0_103_ parameter0=Address value0=192.168.0.103 parameter1=Port value1=1201 parameter2=Motorola byteorder value2=Yes [Redundancy] NumOfGroups=0 Im Logfile habe ich immer diese Meldungen: ;********* ;<loggername>OPCServer.log</loggername> ;<logoptions> ; <maxfiles>0</maxfiles> ; <maxfilesize>1048576</maxfilesize> ;</logoptions> ;********* 2026-09-29T12:01:40.598+0200, OPC-Server V3.5.20.0 by CODESYS Development GmbH. 2026-09-29T12:01:40.598+0200, Path for ini-File: C:\ProgramData\CODESYSOPC\OPCServer.ini 2026-09-29T12:01:40.598+0200, Path for AE-Config: C:\Program Files (x86)\CODESYS 3.5.20.0\CODESYS OPC Server 3\OPCServerA.ini 2026-09-29T12:01:40.598+0200, AE-Configuration unused. 2026-09-29T12:01:40.598+0200, 3 PLCs configured 2026-09-29T12:01:40.598+0200, [PLC1]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC2]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC3]: Try to open connection... 2026-09-29T12:01:40.599+0200, [PLC1]: Open communication successful 2026-09-29T12:01:40.600+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC1]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulId = 0, m_pPlcConfig->pszName = PLC1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->ulWaitTime = 12000, m_pPlcConfig->ulReconnectTime = 10000 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->pszProjectName = ZE_PC01 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC1]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: ---------- Configuration ---------- 2026-09-29T12:01:40.601+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.601+0200, [PLC2]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulId = 1, m_pPlcConfig->pszName = PLC2 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->pszProjectName = ZE_PC02 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [PLC2]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.601+0200, [__CommState] : Initially added implicit variable. 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->pszInstance = TCPIP_0_102_ 2026-09-29T12:01:40.601+0200, [PLC2]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.601+0200, [PLC2]: parameter0 = Address, value0 = 192.168.0.102 2026-09-29T12:01:40.601+0200, [PLC2]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.601+0200, [PLC2]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.601+0200, [PLC2]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.601+0200, [PLC2]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.601+0200, [PLC2]: ----------------------------------- 2026-09-29T12:01:40.601+0200, [PLC2]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC1]: m_pDeviceDesc->pszInstance = TCPIP_0_101 2026-09-29T12:01:40.602+0200, [__CommStateOK] : Initially added implicit variable. 2026-09-29T12:01:40.602+0200, [PLC3]: ---------- Configuration ---------- 2026-09-29T12:01:40.602+0200, [PLC3]: PLCHandler Version: 3.5.20.0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulId = 2, m_pPlcConfig->pszName = PLC3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->it = IT_GATEWAY, m_pPlcConfig->bActive = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bLogToFile = 1, m_pPlcConfig->ulLogFilter = 0xF 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->bMotorola = 1, m_pPlcConfig->bLogin = 1 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulBufferSize = 4800, m_pPlcConfig->bPreCheckIdentity = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulHwVersion = 0 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulTimeout = 10000, m_pPlcConfig->ulNumTries = 3 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->ulWaitTime = 10000, m_pPlcConfig->ulReconnectTime = 15000 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->pszProjectName = ZE_PC03 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszDeviceName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pPlcConfig->gwc->pszAddress = localhost, m_pPlcConfig->gwc->ulPort = 1210 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszName = Tcp/Ip 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->pszInstance = TCPIP_0_103_ 2026-09-29T12:01:40.602+0200, [PLC3]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.602+0200, [PLC3]: parameter0 = Address, value0 = 192.168.0.103 2026-09-29T12:01:40.602+0200, [PLC3]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.602+0200, [PLC3]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.602+0200, [PLC3]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.602+0200, [PLC3]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.602+0200, [PLC3]: ----------------------------------- 2026-09-29T12:01:40.602+0200, [PLC3]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.603+0200, [PLC1]: m_pDeviceDesc->ulNumParams = 5 2026-09-29T12:01:40.603+0200, [PLC1]: parameter0 = Address, value0 = 192.168.0.101 2026-09-29T12:01:40.603+0200, [PLC1]: parameter1 = Port, value1 = 1201 2026-09-29T12:01:40.603+0200, [PLC1]: parameter2 = Motorola byteorder, value2 = Yes 2026-09-29T12:01:40.603+0200, [PLC1]: parameter3 = SymbolFilePath, value3 = C:\Windows\system32\ 2026-09-29T12:01:40.603+0200, [PLC1]: parameter4 = WriteThroughReadCache, value4 = 1 2026-09-29T12:01:40.603+0200, [PLC1]: ----------------------------------- 2026-09-29T12:01:40.603+0200, [PLC1]: CPLCHandler: Interface: IT_GATEWAY used 2026-09-29T12:01:40.623+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle begin... 2026-09-29T12:01:40.623+0200, [PLC1]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.623+0200, [PLC3]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.625+0200, [PLC2]: CPLCHandler: Reconnect[1]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:40.850+0200, * ERROR: [PLC2]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.850+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:40.851+0200, [PLC2]: Open communication successful 2026-09-29T12:01:40.851+0200, [PLC2]: Starting adding new symbols 746... 2026-09-29T12:01:40.852+0200, [PLC3]: Open communication successful 2026-09-29T12:01:40.852+0200, [PLC3]: Starting adding new symbols 1168... 2026-09-29T12:01:40.875+0200, [PLC2]: Adding symbols finished 2026-09-29T12:01:40.875+0200, [PLC2]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:40.881+0200, [PLC3]: Adding symbols finished 2026-09-29T12:01:40.881+0200, [PLC3]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:45.928+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[1]: FAILED! Symbols were loaded offline 2026-09-29T12:01:45.928+0200, [PLC1]: Open communication successful 2026-09-29T12:01:45.929+0200, [PLC1]: Starting adding new symbols 499... 2026-09-29T12:01:45.933+0200, [PLC1]: Adding symbols finished 2026-09-29T12:01:45.933+0200, [PLC1]: CPLCHandler: Reconnect[1]: Reconnect cycle end 2026-09-29T12:01:46.110+0200, OPC-Server started successful. 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:50.625+0200, [PLC1]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle begin... 2026-09-29T12:01:55.625+0200, [PLC2]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:01:55.625+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.625+0200, [PLC3]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:55.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:55.699+0200, [PLC1]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:01:59.341+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[2]: FAILED! 2026-09-29T12:01:59.341+0200, [PLC2]: CPLCHandler: Reconnect[2]: Reconnect cycle end 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:00.626+0200, [PLC1]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:05.700+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:05.700+0200, [PLC1]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle begin... 2026-09-29T12:02:10.626+0200, [PLC3]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.626+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:10.626+0200, [PLC2]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:10.627+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:10.627+0200, [PLC1]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:15.693+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[3]: FAILED! 2026-09-29T12:02:15.693+0200, [PLC3]: CPLCHandler: Reconnect[3]: Reconnect cycle end 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:20.627+0200, [PLC1]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle begin... 2026-09-29T12:02:25.626+0200, [PLC2]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:25.626+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:25.626+0200, [PLC3]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:25.699+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:25.699+0200, [PLC1]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:30.629+0200, [PLC1]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:30.675+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[4]: FAILED! 2026-09-29T12:02:30.675+0200, [PLC2]: CPLCHandler: Reconnect[4]: Reconnect cycle end 2026-09-29T12:02:34.710+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:34.710+0200, [PLC1]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.627+0200, [PLC2]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle begin... 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.628+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:40.628+0200, [PLC3]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:40.630+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:02:40.630+0200, [PLC1]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:02:44.711+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[5]: FAILED! 2026-09-29T12:02:44.711+0200, [PLC2]: CPLCHandler: Reconnect[5]: Reconnect cycle end 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:02:50.631+0200, [PLC1]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.628+0200, [PLC2]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle begin... 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:02:55.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:55.629+0200, [PLC3]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:02:55.690+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:02:55.690+0200, [PLC1]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:02:59.692+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[6]: FAILED! 2026-09-29T12:02:59.692+0200, [PLC2]: CPLCHandler: Reconnect[6]: Reconnect cycle end 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:00.632+0200, [PLC1]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:04.716+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:04.716+0200, [PLC1]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.628+0200, [PLC2]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle begin... 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.629+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:10.629+0200, [PLC3]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle begin... 2026-09-29T12:03:10.632+0200, [PLC1]: CPLCHandler: Reconnect[10]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:10.632+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[10]: FAILED! 2026-09-29T12:03:10.633+0200, [PLC1]: CPLCHandler: Reconnect[10]: Reconnect cycle end 2026-09-29T12:03:14.762+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[7]: FAILED! 2026-09-29T12:03:14.762+0200, [PLC2]: CPLCHandler: Reconnect[7]: Reconnect cycle end 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle begin... 2026-09-29T12:03:20.634+0200, [PLC1]: CPLCHandler: Reconnect[11]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:24.730+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[11]: FAILED! 2026-09-29T12:03:24.730+0200, [PLC1]: CPLCHandler: Reconnect[11]: Reconnect cycle end 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.630+0200, [PLC2]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle begin... 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:25.631+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:25.631+0200, [PLC3]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:29.742+0200, ERROR: [PLC2]: CPLCHandler: Reconnect[8]: FAILED! 2026-09-29T12:03:29.742+0200, [PLC2]: CPLCHandler: Reconnect[8]: Reconnect cycle end 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle begin... 2026-09-29T12:03:30.635+0200, [PLC1]: CPLCHandler: Reconnect[12]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:34.717+0200, ERROR: [PLC1]: CPLCHandler: Reconnect[12]: FAILED! 2026-09-29T12:03:34.718+0200, [PLC1]: CPLCHandler: Reconnect[12]: Reconnect cycle end 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.630+0200, [PLC2]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.631+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle begin... 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.632+0200, ERROR: [PLC3]: CPLCHandler: Reconnect[9]: FAILED! 2026-09-29T12:03:40.632+0200, [PLC3]: CPLCHandler: Reconnect[9]: Reconnect cycle end 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle begin... 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: STATE_PLC_NOT_CONNECTED: tries to open channel... 2026-09-29T12:03:40.637+0200, * ERROR: [PLC1]: CPLCHandler: Reconnect[13]: FAILED! 2026-09-29T12:03:40.637+0200, [PLC1]: CPLCHandler: Reconnect[13]: Reconnect cycle end Ich kenne mich nicht so gut aus mit dem Thema OPC. Aber bis vor dem Windows Update hat es funktioniert.. Bin mit meiner Fehlersuche langsam am Ende...!
Last updated: 2026-09-29

Post by baltzer on ICertificateVerifier.VerifyCertificate doesn't appear to override an ERR_CERT_HAS_EXPIRED rejection in TCP_Client.Upgrade() ^{CODESYS Forge talk (Post)}
Setup: Net Base Services (NBS), TCP_Client + TLSContext, ePurpose := CLIENT_SIDE, connecting to a third-party embedded device (Velux KLF200 home automation gateway) whose factory-installed TLS certificate expired on 2026-07-12 and has no user-facing renewal path. Tested on both CODESYS Control for Raspberry Pi SL (3.5.19.0) and CODESYS Control Win V3 x64, with identical results on both. Goal: Accept the peer's expired certificate via a custom ICertificateVerifier implementation, since the certificate itself can never be replaced. Implementation: FUNCTION_BLOCK FB_MyCertVerifier IMPLEMENTS NBS.ICertificateVerifier VAR udiCallCount : UDINT; aeCurStateLog : ARRAY[0..9] OF NBS.RTS_IEC_RESULT; END_VAR METHOD VerifyCertificate : UDINT VAR_INPUT hCert : NBS.RTS_IEC_HANDLE; eCurState : NBS.RTS_IEC_RESULT; END_VAR IF udiCallCount < 10 THEN aeCurStateLog[udiCallCount] := eCurState; END_IF udiCallCount := udiCallCount + 1; VerifyCertificate := 0; // also tried: VerifyCertificate := eCurState; Wired in via tlsContext.itfCertVerifer := certVerifier at declaration time, alongside itfTLSContext := tlsContext set at TCP_Client's own declaration (per an earlier forum thread here on ensuring inline start-values on FB-typed variables are actually honored when nested one level deep - that fix was needed and worked correctly for getting the handshake to start at all). Observed: - VerifyCertificate is confirmed called exactly once per connection attempt (via the call counter above). - eCurState passed in = 0x709 = ERR_CERT_HAS_EXPIRED - correctly reflecting the actual state of the peer's certificate. - Packet capture confirms the full TLS 1.2 handshake completes correctly at the wire level: ClientHello -> ServerHello -> Certificate -> ServerKeyExchange -> ServerHelloDone -> our ClientKeyExchange/ChangeCipherSpec/Finished -> server's ChangeCipherSpec/Finished. Both sides successfully complete the cryptographic handshake. - Despite this, TCP_Client.Upgrade() subsequently returns NBS.ERROR.CONNECTION_ERROR, and the connection is torn down with a plain TCP FIN (not a TLS alert) roughly 7-8ms after our side ACKs the server's Finished message. - TCP_Client.eErrorID (inherited from LCon) remains NO_ERROR throughout - the failure is only visible via Upgrade()'s return value. - Returning 0 (ERR_OK/ERR_CERT_OK - confirmed via the CmpErrors2 Interfaces documentation that these are literally the same value) makes no difference. - Echoing eCurState back unchanged (on the theory that this callback might work like mbedTLS's native verify callback, where the incoming state is a flags value to be cleared/modified and returned, rather than paired with a separate fixed "accept" sentinel) also makes no difference. - Identical result across udiVerificationMode := 0, 1, and 2. - Importing the peer's certificate into the runtime's trusted certificate store via cert-import trusted makes no difference either. - With itfCertVerifer left at its default (no custom verifier) and udiVerificationMode := 2, the underlying engine sends its own fatal TLS alert (handshake_failure) immediately after receiving the peer's Certificate message - suggesting built-in validation may reject at the record layer independent of whether a custom verifier is even present. Questions: 1. Is there an additional step required for a custom ICertificateVerifier to actually override an ERR_CERT_HAS_EXPIRED (or more generally, any ERR_CERT_*) rejection, or is certificate validation enforced unconditionally for a CLIENT_SIDE TLSContext regardless of what the verifier returns? 2. Is 0/ERR_OK genuinely the correct "accept" return value for VerifyCertificate, or does it expect something else (a specific bit pattern, a different constant, a value that must be computed from hCert itself)? 3. Is there a supported way to connect to a peer presenting a certificate that is both self-signed and expired, short of the peer issuing a new certificate? Happy to share the full packet captures or additional test combinations if useful. Also worth noting for anyone finding this thread later: a maintained Node-RED library for this same device (node-red-contrib-velux-klf200, forked to handle this exact expired-certificate situation) solves it by disabling built-in TLS validation entirely (rejectUnauthorized: false) and doing fingerprint-based pinning by hand after the handshake completes, rather than relying on a validation callback - which may be the more realistic approach here too if ICertificateVerifier genuinely can't override this class of rejection. Thanks in advance /Jørgen Disclosure: most of the CODESYS code and this investigation was developed with the help of Claude (Anthropic's AI assistant) - the state machine design, SLIP/checksum implementation, and debugging methodology (including the packet capture analysis) were worked through in an extended back-and-forth with it. Posting here because we've run out of self-serviceable options and this now looks like it needs input from someone with visibility into NBS's actual implementation.
Last updated: 2026-07-26

Post by brouwyka on JSONByteArrayWriter string result incorrect order ^{CODESYS Forge talk (Post)}
Hello everybody! We are currently working on implementing a call to an API that tracks data sent to it through a JSON body. Versions: CODESYS V3.5 SP19 Patch 7 using IIOT Libraries SL license, specifically JSON Utilities SL version 1.13.0.0. For simplicity, let's say we want to construct the following JSON body for our request (simplified to just 1 key-value pair in each of the array objects to keep things shorter, but we'd have multiple fields in each in reality): { "id": "machine_1", "readings": [ { "temp_mid": 153.8 }, { "temp_mid": 98.3 } ], "status": "RUNNING" } However, our "readings" data is added over time, not in creation, so calls to the builder would be somewhat out of order. In a simplified manner, our calls would look like this: jsonBuilder(pJsonData := JsonData, diRootObj => rootJsonIndex); // rootJsonIndex = 0. // Set "id" at root JSON object. wsValue := "machine_1"; jsonBuilder.SetKeyWithValue("id", wsValue, diParentIndex := rootJsonIndex); // JSONData KEY: diParentIndex = 0 & diIndex = 1, VALUE: diParentIndex = 1 & diIndex = 2. // ... Time passes, we get our first reading to add ... // The "readings" array does not exist yet, so we make it first at root JSON object before adding our first reading. readingsJsonArrayIndex := jsonBuilder.SetKeyWithArray("readings", diParentIndex := rootJsonIndex); // JSONData KEY: diParentIndex = 0 & diIndex = 3, VALUE: diParentIndex = 3 & diIndex = 4. // Then add the first reading, for which we first have to make an object. readingsJsonArrayObjectIndex := jsonBuilder.SetObject(diParentIndex := readingsJsonArrayIndex); // JSONData OBJECT: diParentIndex = 4 & diIndex = 5. // And then we add the field(s) in the object for the first reading. // NOTE the use of `readingsJsonArrayObjectIndex` so we set the field(s) in the first object in the array. rValue := 153.8; jsonBuilder.SetKeyWithValue("temp_mid", wsValue, diParentIndex := readingsJsonArrayObjectIndex); // JSONData KEY: diParentIndex = 5 & diIndex = 6, VALUE: diParentIndex = 6 & diIndex = 7. // ... Time passes, we want to add another root-JSON-level field ... // Set "status" at root JSON object. wsValue := "RUNNING"; jsonBuilder.SetKeyWithValue("status", wsValue, diParentIndex := rootJsonIndex); // JSONData KEY: diParentIndex = 0 & diIndex = 8, VALUE: diParentIndex = 8 & diIndex = 9. // ... Time passes, we want to add a second reading ... // "readings" array exists, so add the second reading, but first we have to make another object. // NOTE the re-use of the earlier stored `readingsJsonArrayIndex`, so we add the new object to that previously created array. readingsJsonArrayObjectIndex := jsonBuilder.SetObject(diParentIndex := readingsJsonArrayIndex); // JSONData OBJECT: diParentIndex = 4 & diIndex = 10. // And then we add the field(s) in the object for the first reading. // NOTE the use of `readingsJsonArrayObjectIndex` so we set the field(s) in the SECOND(, new) object in the array. rValue := 98.3; jsonBuilder.SetKeyWithValue("temp_mid", wsValue, diParentIndex := rootJsonIndex); // JSONData KEY: diParentIndex = 10 & diIndex = 11, VALUE: diParentIndex = 11 & diIndex = 12. // ... Finally, we want to send to the API, so we must convert the builder to data the client accepts as a body ... xTestWriteToJsonArray := TRUE; jsonArrayWriter( xExecute := xTestWriteToJsonArray, pwData := ADR(jsonDataString), udiSize := SIZEOF(jsonDataString), jsonData := JsonData^ ); IF jsonArrayWriter.xDone THEN // The writer was successful, the `jsonDataString` VAR should now contain a WString copy of the JSON object from the builder. xTestWriteToJsonArray := FALSE; END_IF We see that the JsonData STRUCT is correctly organised (in terms of the diParentIndex & diIndex set by it for each JsonElement) as we expect, as outlined in my comments in the simplified code above. However, as soon as we pass it to the jsonArrayWriter (which is a JSON.JSONByteArrayWriter), the resulting jsonDataString does not match our expectations, instead coming out like this: { "id": "machine_1", "readings": [ { "temp_mid": 153.8 } ] } { "temp_mid": 98.3 } "status": "RUNNING" The behaviour of the JSONByteArrayWriter thus seems to be the problem here. It does not seem to correctly process the children of JsonElements that are ARRAYs when additions to them are done broken up by additions to the lower level JSON OBJECT they are a part of. We have confirmed this by changing the order of the calls in our example to add both readings before adding the "status", in which case we get our expected outcome. However, in reality this is not possible for us - additions to any of the JSON's objects, arrays or array objects may happen at any time after other fields elsewhere in the JSON have been added. Does anyone know a way around this, a fix, or knows a solution we simply have not found? This same phenomenon was also noted on this forum by user @ryusoup at the end of 2023 (https://forge.codesys.com/forge/talk/Engineering/thread/c45929e2f1/#e27f) and user @mtho in early 2024 (https://forge.codesys.com/forge/talk/Engineering/thread/cd1bb450db/#1292) but both topics received no activity beyond both users' opening posts. Looking through the release notes of all the versions of the JSON Utilities SL library, I also did not see any remarks on resolutions of bugs in this vain. Thanks in advance for the assistance!
Last updated: 2026-06-10

Post by brandonje on [Error] IoDrvEtherNetIP Library with Weintek ^{CODESYS Forge talk (Post)}
I'm using weintek and Codesys V3.5 SP22 when I try to charge an ethernetIP device show me this error: ------ Build started: Application: Device.Application ------- Typify code... [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0077: Unknown type: '(_pPhysicalLink^._xLinkState <> CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up)' [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0077: Unknown type: 'CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up' [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0062: 'CmpSysEthernet.OperStatus' is no structured variable [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0063: 'CMPSYSETHERNET, 3.4.3.0 (3S - SMART SOFTWARE SOLUTIONS GMBH)' contains no definition for 'OperStatus' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ADR(ethFrame.ethData)'' to type 'POINTER TO StructEthernetframe' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ethFrame.udFrameLen'' to type 'ANY' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '((driverInstance * 2) + 1)'' to type 'ANY' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0077: Unknown type: '(driverInstance * 2)' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0077: Unknown type: 'driverInstance' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0046: Identifier 'driverInstance' not defined [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SIZEOF(ethFrame.ethData)' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0018: 'ethFrame.udFrameLen' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ADR(ethFrame.ethData)'' to type 'POINTER TO BYTE' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'ethFrame' [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier 'ethClose' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: 'ethClose' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_diAdapterNumber' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_stName' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_stName' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_stDescription' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_stDescription' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0077: Unknown type: '(_pPhysicalLink^._xLinkState = CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up)' [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0077: Unknown type: 'CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up' [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0062: 'CmpSysEthernet.OperStatus' is no structured variable [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0063: 'CMPSYSETHERNET, 3.4.3.0 (3S - SMART SOFTWARE SOLUTIONS GMBH)' contains no definition for 'OperStatus' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] memory block manager, 3.5.21.30 (codesys): ObjectRetain [Disposable]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] memory block manager, 3.5.21.30 (codesys): ObjectRelease [Disposable]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'frame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'ethFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0032: Cannot convert type 'Unknown type: 'ADR(frame.ethData[0])'' to type 'POINTER TO BYTE' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'frame.ethData[0]' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0032: Cannot convert type 'Unknown type: 'SIZEOF(frame.ethData)'' to type 'UDINT' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'frame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0018: 'frame.udFrameLen' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Receive [UcmmReceiver]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Send [UcmmReceiver]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] asynchronous job manager, 5.0.0.0 (codesys): ExtendAsync [FactoryBase]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. Compile complete -- 71 errors, 0 warnings Build complete -- 71 errors, 0 warnings : No download possible
Last updated: 2026-08-20

Sort by relevance or date