Post by marek71 on Ambiguous use of name - CO136 ^{CODESYS Forge talk (Post)}
My PLC is WAGO PFC200 Firmware Revision 26. target After updating WAGO_Devices_and_Libraries with newer Firmware 27, CODESYS wants to update all libraries to new versions. I will only add that I did not update the Firmware in the PLC. After compiling the program, I received the following errors: ------ Build started: Application: Device.Application ------- Typify code... [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): FbSerialInterface_internal: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): FbSerialInterface_internal: C0136: Ambiguous use of name 'RTS_IEC_RESULT' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): Initialize [FbSerialInterface_internal]: C0032: Cannot convert type 'Unknown type: 'RTS_INVALID_HANDLE'' to type 'POINTER TO BYTE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): Initialize [FbSerialInterface_internal]: C0136: Ambiguous use of name 'RTS_INVALID_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): Initialize [FbSerialInterface_internal]: C0046: Identifier 'RTS_INVALID_HANDLE' not defined [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): comextra_is_tx_empty: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): comextra_get_line_state: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): comextra_is_line_available: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): COMSW_SET_MODE: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' [ERROR] wagosyscom_internal_pfc, 1.0.2.5 (wago): comextra_set_line_state: C0136: Ambiguous use of name 'RTS_IEC_HANDLE' Compile complete -- 10 errors, 0 warnings Build complete -- 10 errors, 0 warnings : No download possible The problem was caused by the WagoSysPlainMem(WAGO) library in the original version 1.5.3.0 after updating to 1.5.3.1. After returning to version 1.5.3.0, the problems disappeared. Probably the version number of this library is responsible for supporting the appropriate Firmware Revision. Can anyone confirm or deny my suspicions?
Last updated: 2024-07-06

Ambiguous use of name - CO136 ^{CODESYS Forge talk (Thread)}
Ambiguous use of name - CO136
Last updated: 2024-07-06

Post by bamir on Codesys Visualisation HMI ^{CODESYS Forge talk (Post)}
Which is the best HMI to display the codesys visualisation. I have my program in exor PLC
Last updated: 2024-07-06

Codesys Visualisation HMI ^{CODESYS Forge talk (Thread)}
Codesys Visualisation HMI
Last updated: 2024-07-06

Post by bamir on Codesys Visualisation HMI ^{CODESYS Forge talk (Post)}
Which is the best HMI to display the codesys visualisation. I have my program in exor PLC
Last updated: 2024-07-06

(no subject) ^{CODESYS Forge talk (Thread)}
(no subject)
Last updated: 2024-07-07

Post by hermsen on Raspberry Pi 4.12.0.0 SL also stops after 15s ^{CODESYS Forge talk (Post)}
After installing this new 4.12.0.0 SL version on my RPi5 8GB and the latest bootloader, the runtime disappeared after 15secs. The bootloader my pi uses is from 2024-06-11. I was able to resolve this issue using this post: https://forge.codesys.com/forge/talk/Runtime/thread/be25c0ff66/ The workaround works for me.
Last updated: 2024-07-06

Post by charleskentyfz on (no subject) ^{CODESYS Forge talk (Post)}
I have created an EtherCAT slave code and fixed two slaves (IDs written in the 0xF050 object dictionary). The module IDs are 0x1 and 0x101, respectively. It can be scanned normally in TwinCAT, but when scanning in CODESYS, it reports an error. Why is this happening？text in the second pic means 'device cannot be found in repository'
Last updated: 2024-07-07

Raspberry Pi 4.12.0.0 SL also stops after 15s ^{CODESYS Forge talk (Thread)}
Raspberry Pi 4.12.0.0 SL also stops after 15s
Last updated: 2024-07-06

Codesys Visualisation HMI ^{CODESYS Forge talk (Thread)}
Codesys Visualisation HMI
Last updated: 2024-07-06

Post by tk096 on SoftMotion SML ^{CODESYS Forge talk (Post)}
Hi, can you post a screenshot of your drive configuration?
Last updated: 2024-07-08

Post by disha on Export data with the Trend API ^{CODESYS Forge talk (Post)}
Can you please share the code as i am the beginner for codesys. I don't have any idea that how sqlite is integrated with the codesys.
Last updated: 2024-07-08

Post by dekelec on Codesys 2.3 & Peak PCAN ^{CODESYS Forge talk (Post)}
IF you have an USB interface type in "Peak_USB" for CAN card driver (Name of CAN card driver). No need to add libraries for communication via CoDeSys Gateway. For other card types contact PEAK support and they will help you. Regards,
Last updated: 2024-07-08

Post by taqamert on Codesys 2.3 & Peak PCAN ^{CODESYS Forge talk (Post)}
Still same error.
Last updated: 2024-07-08

Export data with the Trend API ^{CODESYS Forge talk (Thread)}
Export data with the Trend API
Last updated: 2024-07-08

SQLITE connection ^{CODESYS Forge talk (Thread)}
SQLITE connection
Last updated: 2024-07-08

Post by disha on SQLITE connection ^{CODESYS Forge talk (Post)}
Are you able to do it? Can you please help me out?
Last updated: 2024-07-08

exception in system events handler ^{CODESYS Forge talk (Thread)}
exception in system events handler
Last updated: 2024-07-08

Post by installwhat on exception in system events handler ^{CODESYS Forge talk (Post)}
I've noticed that exceptions in system event handlers don't stop the runtime or call the exception handler. I've included a very basic example to demonstrate. It seems likely this is undesired but unavoidable. Is that the case? Is there any advice on the matter? Thanks
Last updated: 2024-07-08

Post by installwhat on What is the solution for "Application stopped on recovery switch request"? ^{CODESYS Forge talk (Post)}
<Entry severity="information" component="<10>" user="nobody" timestamp="2024-07-04 ?? 5:10:47" infoId="1">Axis#=121 , Error=30014 , Emergency 2 <Entry severity="information" component="<10>" user="nobody" timestamp="2024-07-04 ?? 5:10:23" infoId="1">TCP Server : WaitClient <Entry severity="information" component="<10>" user="nobody" timestamp="2024-07-04 ?? 5:10:23" infoId="1">TCP Server : Init What is "component="<10>"? Is this system a vanilla CODESYS RTE or is it a modified installation. I think more details are required.
Last updated: 2024-07-08

Change IP address from IEC code ^{CODESYS Forge talk (Thread)}
Change IP address from IEC code
Last updated: 2024-07-08

Post by naks on Change IP address from IEC code ^{CODESYS Forge talk (Post)}
Hi, I'm working with wago 750-8212 controller. I want to change the IP address of the Ethernet adapter from webvisu. I have read some other threads in this forum and I have tried the following: Added the following text to the config file CODESYSControl.cfg: [SysSocket] Adapter.0.Name="br1" Adapter.0.EnableSetIpAndMask=1 Used the below code : IF xUpdateEthernet THEN Ethernet.Enable := FALSE; Reconfig ( xExecute := TRUE, itfNode := Ethernet, eError => ErrorReconfig, xBusy => xBusy, xDone => xDone, xError => xErrorReconfigure); IF Reconfig.xDone THEN ErrorCode := Ethernet.UpdateConfiguredIPSettings(IpAddress := NewIp, gateway := newGateway, subnetmask := newSubnetmask); END_IF IF Reconfig.xDone OR Reconfig.xError THEN reconfig(xExecute := FALSE); END_IF Ethernet.Enable := TRUE; Reconfig(xExecute := TRUE, itfNode := Ethernet ); END_IF I could change the IP address but when i restart my Controller then the IP address resets to the original, Is there anything I have missed, what else can i try ? Thank you in advance.
Last updated: 2024-07-08

Post by naks on Dynamic Setting IP Address from IEC code ^{CODESYS Forge talk (Post)}
Hi everyone, I was able to change the IP address of my Controller (wago 750-8212), but when i restart my Controller then the IP address resets to the original, are there any other settings i need to implement?
Last updated: 2024-07-08

Post by rafael on Access to user group IDs ^{CODESYS Forge talk (Post)}
Hello, I'm trying to access the group IDs of the connected user. "CurrentUserGroupId" var shows only the first group ID that the user is assigned, I need the other group IDs that the user is in. I find some structs but I can't find where they are used, like "VUM_User" scruct from visuusermgmt, where can I find this vars? https://content.helpme-codesys.com/en/libs/VisuUserMgmt2%20Interfaces/Current/VUM_User.html abyUserGroupIDs seens perfect but I can't find a GVL where it is used.
Last updated: 2024-07-08

Post by mucleus on What is the solution for "Application stopped on recovery switch request"? ^{CODESYS Forge talk (Post)}
Component ID 10 is my own log message by LogAdd Function. I want to know in what cases the application stops.
Last updated: 2024-07-09

Sort by relevance or date