Post by rmaas on Fieldbus has lost synchronicity ^{CODESYS Forge talk (Post)}
Thanks for the suggestions! It seems that increasing the value DCInSyncWindow helped, running without error for 1/2 day now.
Last updated: 2024-04-15

Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected ^{CODESYS Forge talk (Thread)}
Automation Builder V2.5 EtherCAT CM579 Master Scan for devices - >No gateway selected
Last updated: 2024-05-20

"You are using inconsistent overlay settings, please check your compiler defines for the current application" error ^{CODESYS Forge talk (Thread)}
"You are using inconsistent overlay settings, please check your compiler defines for the current application" error
Last updated: 2024-05-29

How to change login visualization for other visualization after user logged in ^{CODESYS Forge talk (Thread)}
How to change login visualization for other visualization after user logged in
Last updated: 2024-06-05

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
Thank you for the information and support - I need to think this through again.
Last updated: 2025-11-18

Error: C0138: No matching 'FB_Init' method found for instantiation of VisuClientObjectMgr ^{CODESYS Forge talk (Thread)}
Error: C0138: No matching 'FB_Init' method found for instantiation of VisuClientObjectMgr
Last updated: 2025-11-28

Error: C0138: No matching 'FB_Init' method found for instantiation of VisuClientObjectMgr ^{CODESYS Forge talk (Thread)}
Error: C0138: No matching 'FB_Init' method found for instantiation of VisuClientObjectMgr
Last updated: 2025-11-28

What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Thread)}
What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask()
Last updated: 2025-11-12

Using SCADA Data and C# Integration for Real-Time Production KPI Monitoring ^{CODESYS Forge talk (Thread)}
Using SCADA Data and C# Integration for Real-Time Production KPI Monitoring
Last updated: 2026-06-16

Getting SMC_ERROR 34 SMC_AXIS_NOT_READY_FOR_MOTION, while the axis should be ready for motion ^{CODESYS Forge talk (Thread)}
Getting SMC_ERROR 34 SMC_AXIS_NOT_READY_FOR_MOTION, while the axis should be ready for motion
Last updated: 2026-07-07

Question about Demo License limitations for Modbus TCP communication and Fieldbus Instances ^{CODESYS Forge talk (Thread)}
Question about Demo License limitations for Modbus TCP communication and Fieldbus Instances
Last updated: 2026-02-28

Post by imdatatas on MC_CamIn did not work properly with SMC_FreeEncoder on SoftMotion 4.17.0.0 ^{CODESYS Forge talk (Post)}
Hello, I am facing a problem with the new Softmotion 4.17.0.0 version. Has anyone encountered a similar problem, what is the solution? I would be happy if you could share it. Problem description: -- "SMC_FreeEncoder" encoder axis is the master, -- The motor of the servo driver on the EtherCAT bus is the slave axis. -- When the MC_CamIn block executed, the InSync output is activated. However, although the master encoder axis position value changes, there is no movement in the slave servo axis! Test steps: 1-) EtherCAT servo axis installed, configured and motion test was performed with MC_Jog. No problem. 2-) Softmotion general axis pool > SMC_FreeEncoder was added and pulse amount configuration was performed. No problem. 3-) Incremental encoder actual count value was transferred to the "SMC_FreeEncoder.diEncoderPosition" variable as DINT under the ethercat task in every cycle and the encoder axis position value was observed. No problem. 4-) A simple CAM table with a 1:1 ratio was created under the project tree. (For example: Simply, when the encoder rotates 1 turn, the motor will rotate 1 turn.) 5-) The SMC_FreeEncoder axis enabled with MC_Power and brought to the StandStill state. 6-) The MC_CamTableSelect block was run with default input values ​​(all absolute) and only the Cam table name was specified. The Done output was seen successfully. No problem. 7-) The MC_CamIn block was activated with default input values ​​(absolute) and only the master encoder axis name, slave servo axis name, CamTableID input pins was specified and then "Execute" input set to TRUE. 8-) The InSync output information of the MC_CamIn block observed as TRUE. However, although the encoder axis value changed, the position value of the slave axis did not change at all, it did not move. It always remained at 0.0mm. 9-) When I repeated the same steps above, only changing the master axis to SM_Drive_Virtual instead of FreeEncoder and gave movement to the virtual axis, this time the slave axis moved successfully. However, when the same steps and operations are performed with the same IDE just downgrade SoftMotion version from 4.17.0.0 to 4.10.0.0, everything works normally and without problems as expected in MC_CamIn block with FreeEncoder master. (By the way, The used IDE version is Codesys V3.5 SP20patch3.) Best Regards Imdat
Last updated: 2024-11-11

Post by talpade on WAGO PLC 200 750-8216 Ethernet connection to Codesys 3.5 ^{CODESYS Forge talk (Post)}
Hello, I have the WAGO PLC 200 750-8210. In addition I have downloaded the "WAGO Devices and Libraries 2.0.4.3" and installed the library into the Codesys v 3.5. I then create a new project on Codesys 3.5 and select the device "750-8216 PFC200 (WAGO)" (which I downloaded from the WAGO library). However when I have connected the ethernet cable from the WAGO device to my computer and on my codesys 3.5 i press "Scan Network" on codesys and it does not detect the device. How can I get it to detect the device? (I have put the ethernet cable from my WAGO to the computer, but it does not show the device).
Last updated: 2024-02-05

Post by reinier-geers on Codeys ^{CODESYS Forge talk (Post)}
Why Make codesys brand versions of Codesys. Nou i have to install DIA . WHY ??? I shoose codesys for the flexibilatie. I have to close Codesys to Install. So hopefully Codesys still works after this nonsens
Last updated: 2024-01-11

Post by alessandro on Configuring a CIP object for Explicit Message ^{CODESYS Forge talk (Post)}
We used this with shared memory codesys. and work. OpENer is an EtherNet/IP™ stack for I/O adapter devices; supports multiple I/O and explicit connections. And we adapt this also for Implicit message. But for arrive to the end we spend a lot of time. :-(((
Last updated: 2025-10-24

Post by nz-dave on Bool turning on in case stament in wrong state? ^{CODESYS Forge talk (Post)}
I had the FB called via a for loop to call a few instances of my FB I have removed it the for loop and just called them 1 by 1. Seems to have sorted the problem. tho, i have other FB's and for loops doing the same thing but they are all fine. below is basically what was happening. var: mVibrator : ARRAY[1..GVL_Settings.Number_Of_Products] OF Main_Vibrator; end_var Controller(PRG) call: FOR v := 1 TO GVL_Settings.Number_Of_Products BY 1 DO; mVibrator[v] (); END_FOR So at state 30: the mVibrator[1].start was turning on 30: Main_Mixer.Start := TRUE; Process_State := 2; IF Main_mixer.Done THEN Main_Mixer.Start := FALSE; Control_State := 40; END_IF but its not till state 50: that it is actual in the code. 50: Main_Suction_valve.Open_Input := TRUE; mVibrator[1].Start := TRUE; Process_State := 4; IF GVL_Weigh_hopper.LoadCell_Weight = 0 THEN Main_Suction_valve.Open_Input := FALSE; mVibrator1.Start := FALSE; Control_State := 60; END_IF Thanks for your input.
Last updated: 2023-12-16

CoDeSys Implementation ^{CODESYS Forge talk (Thread)}
CoDeSys Implementation
Last updated: 2014-04-15

CoDeSys 2.3 Fonts ^{CODESYS Forge talk (Thread)}
CoDeSys 2.3 Fonts
Last updated: 2012-07-09

CoDeSys exercises ^{CODESYS Forge talk (Thread)}
CoDeSys exercises
Last updated: 2012-06-07

Email In CoDeSys ^{CODESYS Forge talk (Thread)}
Email In CoDeSys
Last updated: 2011-08-16

Codesys version 2.3.9.10 ^{CODESYS Forge talk (Thread)}
Codesys version 2.3.9.10
Last updated: 2009-03-23

CoDeSys to access ^{CODESYS Forge talk (Thread)}
CoDeSys to access
Last updated: 2007-01-15

CoDeSys Online ^{CODESYS Forge talk (Thread)}
CoDeSys Online
Last updated: 2006-07-10

Codesys Programming Help ^{CODESYS Forge talk (Thread)}
Codesys Programming Help
Last updated: 2011-02-23

Internal CodeSys Library ^{CODESYS Forge talk (Thread)}
Internal CodeSys Library
Last updated: 2009-03-01

Sort by relevance or date