Post by fless on How to change bHiresMode ^{CODESYS Forge talk (Post)}
Hi, you should see 2 input fields in the scaling tab of your linear axis: increments and units in application just set increments to 10 and units in application to 366
Last updated: 2024-03-12

Post by fless on See only variable ^{CODESYS Forge talk (Post)}
either you have "Insert with namespace" enabled in the SmartCoding options or your GVL_GLOBAL starts with {attribute 'qualified_only'} btw it's considered good practice to put the namespace in front of the variable. you could have variable with the same name in your PRG or FB.
Last updated: 2024-03-14

Post by k4zz on Static Code Analysis ^{CODESYS Forge talk (Post)}
The Solution. For Projects: #check all pool objects system.commands["project", "buildactiveapp"] #run static analysis system.commands["staticanalysis", "run"].execute() For Libraries: #check all pool objects system.commands["project", "buildactiveapp"] #run static analysis system.commands["staticanalysis", "runforlibrary"].execute()
Last updated: 2024-03-20

Post by doli on Table selected row ^{CODESYS Forge talk (Post)}
Hello. So I have two visualizations. In my main visualization I have a table and in the second one I have a dialog. When I select a row I want that dialog to open. How can I do this? Thank you!
Last updated: 2024-03-20

Post by esave on Stepper Drive with Ethercat ^{CODESYS Forge talk (Post)}
Thank you very much Florian The SoftMotionLight package is actually more expencive than the normal SoftMotion. What is exactly the difference? Does my PLC need to be compatible with SoftMotion or does this work with any PLC?
Last updated: 2024-03-22

Post by timvh on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
You should only open de COM port once and then leave it open. This hCom should not keep on incrementing. (off course when you are done communicating, you need to close the COM port)
Last updated: 2024-03-22

Post by andrew-budaiev on Properties feature request ^{CODESYS Forge talk (Post)}
Can I leave a feature request here? If it's possible to do now, but I don't know how, please forgive me. It would be good if the following were possible: Ability to copy/paste properties. Ability to tab through properties.
Last updated: 2024-03-26

Post by kuuki on Losing focus of variable ^{CODESYS Forge talk (Post)}
Hi. Does anyone know how to fix a problem with losing focus of a variable in FBD editor. Sometimes when trying to edit variable name, array index, etc. in network, editor randomly exits "text edit mode" and variable is replaced by text you were typing.
Last updated: 2024-03-26

Post by esave on Stepper Drive with Ethercat ^{CODESYS Forge talk (Post)}
Hello @ph0010421 Thanks for you answer. I dont really get the state machine that you sent me. Is that only for enabling the drive? How can i make movement? Is this with these SDO's? What is SDO exactly? Sorry but i am a little lost (:|)
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by dagsupport on CAA SerialCOM - hCom Reset max value 1023 ^{CODESYS Forge talk (Post)}
Hi TimH Thanks for the information, I thought that was the case so have stepped through the code and found an error that wasn't closing the port, therefore hCom was increasing. Thanks
Last updated: 2024-03-28

Post by jetme on Rampup and rampdown ^{CODESYS Forge talk (Post)}
i'm using FB Ramp_INT function to ramp my pump up and down but I will like to ramp up at a different time and also ramp down at a different time. How can I do that.
Last updated: 2024-03-28

Post by andrew-budaiev on Tank Level Display ^{CODESYS Forge talk (Post)}
If I want to display level in the tank, what's usual approach? Is there tank or vessel element I can use? I see there is bar display, but I can't make it fill the shape I need.
Last updated: 2024-04-03

Post by markosrod on Problem with the license of libraries IIoT ^{CODESYS Forge talk (Post)}
hello people, im having this issue when i try to validate the libraries. im using a device and a softcontainer. I tried with two different Keys and nothing. Please help with this.
Last updated: 2024-04-04

Post by correo0269 on Problems with Raspberry Pi - IoDrvGPIO library ^{CODESYS Forge talk (Post)}
Yes, but I want to use 1-wire and I2C and I am not able to do it due to those errors
Last updated: 2024-04-06

Post by mosayeb on Power off ^{CODESYS Forge talk (Post)}
Hello. It is interesting that almost everyone has faced this problem. Run the program as shown in the attached photo. Give True to the Enable input and change the status of the drive to on and off with Servo-On
Last updated: 2024-04-08

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by dawidr on Timeout Error in Modbus Communication with WAGO PFC200 and iEM2050 Meter using 750-652 Module ^{CODESYS Forge talk (Post)}
Did you manage to solve the problem with time out? I got the same issue and I've no idea what I'm doing wrong.
Last updated: 2024-04-07

Post by saugat10 on Cannot find existing placeholder ^{CODESYS Forge talk (Post)}
I have installed a library VisuUtils. As you can see in the picture it cannot find the reference to System_VisuElemBase though it is indeed present. How can i resolve this issue?
Last updated: 2024-04-08

Sort by relevance or date