Post by sandro66 on Application-based license Modbus Channels ^{CODESYS Forge talk (Post)}
Hi Gatto, Using version 3.5.21.xx, it is no longer possible to use Modbus function blocks (I make extensive use of these FBs.)as shown in the example. https://content.helpme-codesys.com/en/CODESYS%20Examples/_ex_modbus_example.html The compiler detects one Modbus instance for each instance of the communication FB block. The example program above, although simple, reports 8 Modbus instances when compiled with the latest version. Codesys Support says that you must use fieldbus I/O mapping, but this will result in the loss of the ability to programmatically modify communication parameters. Sandro
Last updated: 2025-09-04

Post by alexgooi on Licensing info not available. ^{CODESYS Forge talk (Post)}
Dear Eschwellinger, Thank you for the response. Does that mean that the license-manager inside the Codesys-IDE does not work with this setup anymore? Because when I use this I get the notification that there is no dongle attached to the device (see picture). And If I insert the license by the deploy tool, can I then redeploy the Codesys virtual control container, or does this erase the license completely?
Last updated: 2025-09-30

Post by eschwellinger on Licensing info not available. ^{CODESYS Forge talk (Post)}
yes and no ... if you run the license server on the host (to serve licenses to the docker instances / vplcs then there is no runtime which could check the licenses on the host. Therefore you need the CODESYS WBM to activate or check the licenes or you could use in CODESYS IDE the licensemanager ( not the one for the device licenses) but you have the the IP of the license server that he know where to search for the licenses ..tool options i guess to add it, will add a screenshot later.
Last updated: 2025-10-01

Post by zatalian on Codesys Control for Raspberry Pi 4.10.0.0 - Raspberry Pi OS > 2023-12-05 ^{CODESYS Forge talk (Post)}
There seem to be problems with the latest version of raspberry pi os 64bit (I used the lite version). The codesys control runtime crashes after a few seconds. The same runtime works on the raspberry pi image from 2023-10-10 When starting the runtime from the commandline, i get the following error: ooops... this runtime was build for RASPBERRYPI. Hardware version or firmware version not supported! (and yes, I'm running this on a raspberry pi :-)
Last updated: 2023-12-11

Post by mg0815 on Codesys Control log "eventbuffer full" ^{CODESYS Forge talk (Post)}
Device: RPI 3b or 3B+ System: Wheezy Codesys: 3.5.16.2 I got the Log: 2023-12-13T00:38:43Z, 0x00000054, 2,6,11, !!!! Warning: Eventbuffer full for app=<app>Application</app>; an inputevent with the tag <tag>128</tag> has been dropped This log happens aroud 10 times a second. Sometimes the controller stopped working any more. What is the reason for this? I will update this controller soon (I hope so, but in the meantime I should at least know hoe to prevent this issue) Mario
Last updated: 2023-12-14

Post by paro on Client Independent Visualization Switching ^{CODESYS Forge talk (Post)}
Hi, can you please provide a new example for the topic at CODESYS "Client Independent Visualization Switching" https://forge.codesys.com/prj/codesys-example/client-independ/home/Home/ Since a few versions, the functions used cause warning messages. Examples for the use of all function blocks from the Visu Utils would generally be very helpful! Several people have put together an example here: https://forum-de.codesys.com//download/file.php?id=2240 BR Patrick
Last updated: 2023-12-20

Post by svn123 on In Simulation Mode, logic is not executing ^{CODESYS Forge talk (Post)}
Please check the attached snapshot. I am converting an int to real and storing in rVlv01_SV and then scaling the value using LIN_TRAFO. In the bottom Status Bar of Codesys, both RUN and SIMULATION are visible. When I enter value 100 as input to INT_TO_REAL instruction and press Ctrl-F7, the value can be seen at the input but the logic seems not to work. I searched for help but could not find anything relevant. What could be the reason. Codesys ver3.5.11 svn
Last updated: 2023-12-25

Post by hermsen on Control Runtime Toolkit ^{CODESYS Forge talk (Post)}
Hi, there is a plethora of hardware available for it to be succesful on. In theory every ARM32/64 or x86/64 device is a potential target. Next to this there are embedded device platforms for which specific toolchains are available. A good starting for manufactureres of CODESYS capable devices is available here: https://www.codesys.com/the-system/codesys-inside.html. That should give you a good reference point.
Last updated: 2023-12-31

Post by andrax on Mux I2C ^{CODESYS Forge talk (Post)}
the TCA9548a does not work in Codesys. In Pyton this is only queried once and in Codesys cyclically. Of course you can also insert a terminating resistor in each port, then you should have no problems. I use this one: https://botland.de/8-bit-multiplexer/12723-qwiic-mux-breakout-8-kanal-modul-mit-i2c-multiplexer-tca9548a-sparkfun-bob-16784-5904422341428.html You can simply set the library to the latest version. You do not need Oscat. Do you need an example project for the BMP280?
Last updated: 2024-01-02

Post by andrax on Mux I2C ^{CODESYS Forge talk (Post)}
the TCA9548a does not work in Codesys. In Pyton this is only queried once and in Codesys cyclically. Of course you can also insert a terminating resistor in each port, then you should have no problems. I use this one: https://botland.de/8-bit-multiplexer/12723-qwiic-mux-breakout-8-kanal-modul-mit-i2c-multiplexer-tca9548a-sparkfun-bob-16784-5904422341428.html You can simply set the library to the latest version. You do not need Oscat. Do you need an example project for the BMP280?
Last updated: 2024-01-02

Post by toby on Codesys Control Raspberry PI 4.10.0 - missing 'Update Raspberry PI' option ^{CODESYS Forge talk (Post)}
Hi Edwin, Thanks for the message. My apologies I should have researched this more thoroughly before posting on here. I found a solution to my issue on this post: https://forge.codesys.com/forge/talk/Runtime/thread/6455efaa17/ I needed to run the 'CODESYS Installer' as an Admin, then install the RPi package v4.10.0 in to my package (v3.5 SP19 Patch 5). Thanks, hope you have a good day. Toby
Last updated: 2024-01-09

Post by rodberna on Library for arrays ^{CODESYS Forge talk (Post)}
Hi, I'm creating a program where I need to handle arrays, like: - Declare lenght variable arrays - [array(1..var) of "sometype"]. This is not possible in pure codesys, right? - Know array lenght, min, max, avg values in runtime - append/delete itens in an array - and so on Is there a library know for this in codesys. Is it possible to build our own libraries using some high level language like python or java script?
Last updated: 2024-01-10

Post by takashi on CODESYSControlWinCE Crash ^{CODESYS Forge talk (Post)}
Hey all CODESYS-experts. I'm at a customer site, and we hade a power-failure and one of the devices apparently runs codesys and has crashed. It's an old device (out of warranty) that is bought many years ago. Now this device doesn't seem to boot. Any idea what to do in this case? We have access to the drive so we have access to the files. See screenshots.
Last updated: 2024-01-23

Post by hsmw-wolf on How to fix Codesys Simulation Exception ? ^{CODESYS Forge talk (Post)}
Did anybody have a solution for this problem? I have the same issue and it occured as i wanted to continue work after the weekend. On Friday the simulation was working fine and on Monday thise error appears. There should be a more specific fault description to be honest. As I am writing I try to repair the installation and hope, that this will work. Still I am frustrated, because I don't know where to look for eliminating this fault. I am using CODESYS 3.5 SP19 Patch 5.
Last updated: 2024-01-29

Post by ofey on two different OPC clients with different privileges ^{CODESYS Forge talk (Post)}
Hi! I have usually only connected one OPC client (our system) to an OPC server created in the codesys environment on a PLC. This OPC client has a lot of write privileges. A customer also want OPC access, but I want to restrict his access to only read certain values. Do you know if this is possible inside the single codesys runtime running on a controller?
Last updated: 2024-02-01

Post by otdeveloper on IEC 61499 ^{CODESYS Forge talk (Post)}
It is being worked on by many companies and its even-driven function blocks seem like a natural evolution of the object oriented industrial programming I have seen Gary Pratt (author of the Book of CODESYS and much more) so expertly implement and explain. I would expect CODESYS to have this front and center on their sights and, if they do not, I would be very interested in learning why.
Last updated: 2024-02-09

Post by nearow on TargetVisu not accepting touch inputs ^{CODESYS Forge talk (Post)}
Good day, Currently running a project on a windows 10 IPC with TargetVisu. the project starts and runs but the TargetVisu screens will not accept a touch on the monitor but will work with a mouse. I have the option to use as a touchscreen active. I did not put my license on the device just yet. Do you have to have the license activated on the device before the TargetVisu will work via a touch? running Codesys v3.5 SP 19 Patch 6, 64bit. device is Codesys Control Win v3 X64
Last updated: 2024-02-14

Post by durstloescher on Codesys Input Detector ^{CODESYS Forge talk (Post)}
Good morning, I am currently working on implementing a display dimmer. I want the display to dim after X minutes. This works so far. The implementation is done via the Linux subsystem, to which a command is sent to dim the display. However, my problem is resetting the timer when input is received. I want the dimming timer to be reset with each click/touch. Unfortunately, I can't find a suitable solution for this. Are there any ways to do this? Codesys v3.5 SP19 Patch 2
Last updated: 2024-02-15

Post by kleeswi on SysFileOpen does not work after update to V3.5 SP19 Patch 5 ^{CODESYS Forge talk (Post)}
I use the function SysFile.SysFileOpen(sFileNamePara, SysFile.ACCESS_MODE.AM_WRITE, pErrorFileOpen); to open and write a file. Since the update from Codesys V3.5 SP17 to V3.5 SP19 Patch 5 it does not work anymore. I first had SysFile.SysFileOpen(sFileNamePara, SysFile.ACCESS_MODE.AM_APPEND_PLUS, pErrorFileOpen); in both versions. hFile_Test is a pointer to byte. It gives an exceptional error when dereferencing the hFile_Test pointer. Edit: I use Codesys on a Raspberry pi
Last updated: 2024-02-19

Post by martincapd on EWON ^{CODESYS Forge talk (Post)}
I have the same problem in that I can connect to the eWon and ping the controller IP Address, however I cant connect through CodeSys. I'm using Gateway-1 which is configured to use "IP-Address: localhost" and "Port: 1217". Rather than scanning the network for devices, I enter the IP Address of the device, codesys returns a "No Device is repsonding..." message. See attached. I'm wondering if the IP-Address used Gateway-1 should be "localhost" or the WAN/LAN IP of the eWon? Thanks for the help MC
Last updated: 2024-02-21

Post by martinla on New Codesys Library Dependencies ^{CODESYS Forge talk (Post)}
When creating a new Codesys library, I am getting 2 errors for missing libraries. I can see that I am using newer versions of these in the library manager (3.5.17.0 and 3.5.19.0 opposed to 3.5.8.0 and 3.5.7.0 stated in the errors). IDE Version is V3.5 SP19 Patch 6. The "Download missing libraries..." button in Messages list is not doing anything. Why is it looking for older versions of these libraries? Can this be fixed by using the newer versions? How can I download & install the older version of these libraries?
Last updated: 2024-02-29

Post by timvh on Device logon problem following fresh install ^{CODESYS Forge talk (Post)}
In your project you selected the "CODESYS Control Win V3" as device, but the device you want to connect to is a "CODESYS Control Win V3 x64". Those are not the same. If you double click on the device during the network scan, you will get information that these are not the same, but that you can change the type in your project to the x64 bit type. Another option is to "right-click" on the device in the device tree of your project and select "update device" then select the x64 type.
Last updated: 2024-03-19

Post by remcoborghuis on C0032 Error to type Pointer to IoConfigParameter ^{CODESYS Forge talk (Post)}
Hi All, I'm using codesys on a raspberry PI. I use V3.5 SP18 Patch 2 development system and codesys for raspberry pi 4.8.0.0. Sometimes when I build the project I get error messages C0007: Expression expected instead of ',' and C0032: Cannot convert type 'Unknow type: '!!!'ERROR'!!!" to type 'POINTER TO IoConfigParameter'. I can't click on the message to bring me to the fault. After I do a "Clean all" the build finishes successful. Anyone who can help me with this problem? Thanks! Remco Borghuis
Last updated: 2024-03-25

Post by marcolim on RPC failed 0x16c9a085 ^{CODESYS Forge talk (Post)}
Hello Matteo, I think the problem is about configuration of firewall (windows firewall usually). You can disable temporary the firewall to check if the communication works. Eventually you can: Go to the control panel -> Windows Defender Firewall -> Allow an app or feature Enable the options to change the settings. Scroll down in the application list to CODESYS and CODESYS ControlService. If you don’t see this application add it to the list. Make sure that all the checkboxes are checked (Domain, Private and public).
Last updated: 2024-04-01

Post by eschwellinger on License problem gateway ^{CODESYS Forge talk (Post)}
I just try to help. Anyway it is a big difference if a Store SL runtime or an oem plc and licence is used. These licenses need to be activated on plc side - so you have dependencies to the version (CODESYS and Runtime Version) Did you ever ask Epis out for this situation? They should know which license fit to their device. Even they should know if the device is capable for Softmotion and see the requiremnts in the CODESYS store: Runtime 4.9.0.0 - how should this work with Epis 3.5.16.x? Anyway refund is not a problem.
Last updated: 2024-04-26

Sort by relevance or date