Post by thomas-moba on TrueType font problem ^{CODESYS Forge talk (Post)}
Thanks for your answers! Close and Open CoDeSys has no effect. I already tried the original Roboto and this is working. But I think our marketing compartment changed it.
Last updated: 2024-10-23

Post by tmo21 on Automation server - trends stop recording - need to manually reconnect ^{CODESYS Forge talk (Post)}
Hi Edwin, Thanks for your message. Edge controller Version: 4.4.0.0 based on 3.5.17.30 PLC version: Device Identification Name CODESYS Control for Raspberry Pi MC SL Vendor 3S - Smart Software Solutions GmbH Device type Softmotion3S Firmware version 4.4.0.0
Last updated: 2024-10-23

Post by eschwellinger on Problem Update new version Master ethercat ^{CODESYS Forge talk (Post)}
Hi, if you are on RTE SL, in that situation you should think on an update all 1. RTE version 2. CODESYS DEvelopmentsystem Version 3. Ethercat Master Version to 4.8.0.0.
Last updated: 2024-10-28

Post by yannickasselin on MQTT QoS 1 & 2 ^{CODESYS Forge talk (Post)}
Anyone? Please? The Codesys documentation clearly states that QoS 1 & 2 are supported for Publisher and Subscriber. I really need to make this work for an important project. Thank you
Last updated: 2024-10-29

Post by eschwellinger on CodesysHMI.exe: Start Error ^{CODESYS Forge talk (Post)}
Any changes on this device? Seems that you are missing the patch protection container. Copy this file to your device and execute it "c:\Program Files\CODESYS 3.5.20.30\Temp\Patch_Protection_Only_License.WibuCmRaU"
Last updated: 2024-11-01

Post by navan on File access operation denied ^{CODESYS Forge talk (Post)}
Codesys V3.5.20.10 having issue open windows folder. Willing to know the [Sysfile] location in windows for V3.5.20.10 (32 bit) installation. kindly hep on this.
Last updated: 2024-11-05

Post by sigurdrb on Codesys and error messages, warnings exceptions etc. ^{CODESYS Forge talk (Post)}
I can add that the values I want to read are typical these values highlighted in red on the picture attached.
Last updated: 2024-11-06

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
take a look here. there is a working driver in the collection https://forge.codesys.com/forge/talk/Deutsch/thread/87bfe42cbb/?limit=25#514f
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
Note: if you do not get any values. Check the correct wiring again. The board seems to be running and you have no error.
Last updated: 2024-11-07

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
thank you, i tried your library and device description but i don't get analog values. Do i something wrong? i also got an library error at the I2C_BASE functionblock the calcCycleTime gave an variable size error, so i added thet conversion from ULINT_TO_UDINT.
Last updated: 2024-11-07

Post by andrax on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
your driver is not running. All libraries must be present first! Then you can try the following. Delete the ADS1115 and the I2C_maseter from the device tree. Create everything again.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
i created a new project and did what you said, but still the same problem unfortunately. The ADS1115 is constantly changing from running to not running.
Last updated: 2024-11-08

Post by jeroenaero on CodeSys Raspberry pi I2C driver not found ^{CODESYS Forge talk (Post)}
We use a Compute module 4 it's 64bit based, so i cannot change it to sl.what are the possibilities to get the i2c working?
Last updated: 2024-11-09

Post by timvh on File access operation denied ^{CODESYS Forge talk (Post)}
Go in Windows to this location. Right click on this file and go to properties. Is it in Read-only state? Then CODESYS cannot open in Write mode.
Last updated: 2024-11-09

Post by dogulas on OPC UA C# client connecting to OPC UA CODESYS server ^{CODESYS Forge talk (Post)}
mainak, sorry, just saw your post. I have done that and I still get the same exception. the innerResult says "BadSecureChannelClosed 'Remote side closed connection'". Any other tips? Pointers are welcome.
Last updated: 2024-11-12

Post by kumareasu on Windows on ARM / Microsoft Surface ^{CODESYS Forge talk (Post)}
I too need this information. Is it possible to install CoDeSys runtime and convert a ARM system installed Windows IoT as OS and convert as PLC?
Last updated: 2024-11-16

Post by r-niedermayer on Collapse all ^{CODESYS Forge talk (Post)}
Basically, Codesys does support the Windows shortcuts: such as the " * " and " / " as well as the " + " and " - " Numpad keys to expand or collapse folders and subfolders or the element. This affects both, the objects in the device tree and the folding structures in f.e. the ST editor.
Last updated: 2024-11-21

Post by simone on Collapse all ^{CODESYS Forge talk (Post)}
Thank you so much r-niedermayer, it really helps me. Sorry for the late response but I have worked on a different project rather than the codesys one
Last updated: 2024-12-03

Post by totorovic on Project loses 'Download time' information ^{CODESYS Forge talk (Post)}
Hello, Codesys team, please can I have an explanation? It's frustrating and complicated on production machines to have to reload the entire program even though it's identical, just because of this missing information. How the information 'Download time' is saved?
Last updated: 2024-12-11

Sort by relevance or date