Post by calviniscoding on JSON ^{CODESYS Forge talk (Post)}
Can you post the new code that you have by chance? Also, are you able to send the values of tags dynamically with the RTAC in this JSON format? I'm running into a lot of road blocks with it.
Last updated: 2024-06-21

Post by calviniscoding on JSON ^{CODESYS Forge talk (Post)}
Can you post the new code that you have by chance? Also, are you able to send the values of tags dynamically with the RTAC in this JSON format? I'm running into a lot of road blocks with it.
Last updated: 2024-06-21

Post by pmolke on Einheiten umrechnen, Numpad und Eingabegrenzen ^{CODESYS Forge talk (Post)}
Ich habe das für die Visu anders gelöst. Ich nehme ein Dialog welches Stunden, Minuten und Sekunden einzeln hoch/herunter wählen lässt. Das Ergebnis wird nachdem bestätigen automatisch übergeben. Ich hab mir es aus dem Wagomacros abgeschaut.
Last updated: 2024-06-21

Post by pmolke on Simulation Modubus ^{CODESYS Forge talk (Post)}
Mir ist aktuell nicht bekannt das man kommunikative Daten wirklich simulieren kann. Welche Werte genau willst du denn Simulieren? Die Rückgabewerte aus einer Modbusanfrage vom Gerät ?
Last updated: 2024-06-21

Post by pmolke on Visu: Angepasster Button mit Statusanzeige - welche Möglichkeiten gibt es? ^{CODESYS Forge talk (Post)}
Ja da gibt es durchaus gute Methoden dazu. Schreib mich doch mal an und sende mir dein Beispiel, ich erstelle dir dazu eine Anpassung. Mfg
Last updated: 2024-06-21

Post by pmolke on Bacnet-Properties werden nicht aktualisiert ^{CODESYS Forge talk (Post)}
Das ist normal. Nicht alle Properties gehören der Cyclegroup Entweder du führst manuell die Methode Read aus oder änderst die Gruppe für das Property explizit.
Last updated: 2024-06-21

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
you need to have an own task for the one wire and io update these slaves in an own low prio task!
Last updated: 2025-10-18

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
the project has only one OneWire Master - so if you add the setting "PlaceholderFilePath.2=/sys/devices/w1_bus_master2, $OneWire2$ to the config file it will fail and the Ethercat task will be blocked by the OneWire Master readings?
Last updated: 2025-10-21

Post by eschwellinger on Two OneWireMaster on one Raspberry PI 5 ^{CODESYS Forge talk (Post)}
Could you check the taskcycle time in the taskmonitor (online monitor) - do you really see this 1s on Ethercat Task? Need to check this on my hardware but will take some time...
Last updated: 2025-10-21

Post by ahmed-abohelal on SysComRead Timeout Parameter ^{CODESYS Forge talk (Post)}
Hello I was facing the same problem i have to increase the timeout since the unit looks like to be in us SysComread(hCom:=hCom,pbyBuffer := ADR(readBuffer[0]),ulSize:=128,ulTimeout:=3000000,pResult:= ADR(readRes));
Last updated: 2025-10-22

Post by gatto on Backtick identifiers ^{CODESYS Forge talk (Post)}
Hello, I’m in Codesys 3.5.20.40 and I try to declare the variable ´var1´ but I get an error. here : https://content.helpme-codesys.com/en/CODESYS%20Development%20System/_cds_rules.html i read : Backtick identifiers By using backticks, characters can also be used in identifiers that are not normally permitted in identifiers, such as special characters. The acute accent character is used for backticks: ´ (Unicode: U+02CA) The use of backticks is recommended in order to be able to use the same identifiers in CODESYS as in other programming languages or documents, such as circuit diagrams. Any character may be used between two backticks, except line breaks and other backticks. Keywords are also allowed as identifiers between backticks. Examples: ´Variable+9´ ´INT´ The backticks are part of each identifier and therefore var1 and ´var1´ are two different identifiers. Example PROGRAM PLC_PRG VAR var1 : INT; ´var1´: INT; END_VAR var1 := var1 + 1; ´var1´ := 12; Are there any limitations or is something missing in my development environment?
Last updated: 2025-10-28

Post by kporter on SoftMotion, accessing PDO input data via object ref/pointer ^{CODESYS Forge talk (Post)}
It looks like one can use the OutputData and InputData members of ETCSlaveStack: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.2.0.0/EtherCATStack/ETCSlaveStack.html
Last updated: 2025-10-29

Post by kporter on Exception with ReadNbrSlaves function ^{CODESYS Forge talk (Post)}
I've been playing with the code using the Windows soft master and the ReadNbrSlaves function block seems to work here: https://content.helpme-codesys.com/en/libs/EtherCATStack/4.8.0.0/EtherCATStack/pou-ETCMasterStack/DynamicConfig/fld-DynamicConfig.html
Last updated: 2025-10-31

Post by gseidel on SMC_FB_WASNT_CALLED_DURING_MOTION when enable MC_MoveRelative ^{CODESYS Forge talk (Post)}
Hi ducng, please make sure to call all Motion-FBs in the EtherCAT task. In your case, the PLC_PRG should be below the EtherCAT task, not the MainTask. Best regards, Georg
Last updated: 2025-11-03

Post by gcodejedi on The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Post)}
Hello, I am experiencing this exact same issue. Were you able to get yours resolved? If so, would you mind sharing the solution you discovered? Thanks!
Last updated: 2025-11-03

The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array. ^{CODESYS Forge talk (Thread)}
The element of type 'VisuFbElemImage' could not be updated. Reason: Index was outside the bounds of the array.
Last updated: 2025-11-03

Post by davidbo on How to stay in a method until something is finished. ^{CODESYS Forge talk (Post)}
You never stay in a method. You need a block to do that. Something like: VAR button:BOOL:=FALSE; count:UINT:=0; END_VAR IF button THEN //read pressure count:=count+1; IF count>1 THEN button:=FALSE; count:=0; END_IF END_IF
Last updated: 2025-11-04

Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
I have done: systemctl stop dhcpcd sudo ip addr flush dev eth0 sudo ip link set eth0 up but a call to SysSockSetIpAddressAndNetMask does not give the eth0 an IP address Why?
Last updated: 2025-11-04

Post by tobifenny on Modbus TLS Kommunikation ^{CODESYS Forge talk (Post)}
Hier ist das handbuch: https://www.kostal-solar-electric.com/fileadmin/downloadcenter/kse/BA_KOSTAL_Interface_KSEM_DE.pdf Im Kapitel 1.3.2 ist das mit dem TLS beschrieben und in Kapitel 3.6.2 sind die Modbus-Register beschrieben.
Last updated: 2025-11-06

Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
I have installed: SM_Drive_PosControl 4.18.0.0 and SM_Drive_RaspiStepper_Direct 0.0.0.7 and SM_Drive_RaspiStepper_PulsDir 0.0.0.7 And when I "Generate Code" I immediately get 6 errors (see attached file) What can I do?????
Last updated: 2025-11-09

Post by kalmeyer on Stepper motor control with (SM_Drive_RaspStepper_direct) ^{CODESYS Forge talk (Post)}
Is there perhaps a place where I can see examples of programming with different instructions? This would be a great help. Maybe there are some places where ready-made programs are posted that can be downloaded and tested? /Klaus
Last updated: 2025-11-10

Post by nano on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
have u turned on the Ip-Setter in codesyscontrol.cfg? [SysSocket] Adapter.0.Name="eth0" Adapter.0.EnableSetIpAndMask=1
Last updated: 2025-11-11

Post by davidbo on What is the prerequisites for a Raspberry Pi to work with SysSockSetIpAddressAndNetMask() ^{CODESYS Forge talk (Post)}
I have now and it works. I had the idea that it had something to do with codesyscontrol.cfg, but where can I find a description of all the things you can set in codesyscontrol.cfg and its syntax?
Last updated: 2025-11-12

Post by jonasz on Deploy LicenseServer for Linux SL ^{CODESYS Forge talk (Post)}
After carefully studying the documentation, I have a question: is a second hardware-independent time source required for the correct operation of the VirtualSafety system?
Last updated: 2025-11-17

Post by bruno-roth on 22kW Wallbox mit Modbus ^{CODESYS Forge talk (Post)}
Hallo, das ist wohl das falsche Forum für Wallboxen :-) Aber ich empfehle dir Die GO-E-Charger die hat eine sehr offene Schnittstelle und API auch mit Modbus TCP https://github.com/goecharger/go-eCharger-API-v2/blob/main/modbus-de.md
Last updated: 2025-11-17

Sort by relevance or date