Post by timvh on OSCAT Scale_r function not working in LD 4.60 works in LAD2 on 3.5.21sp3 ^{CODESYS Forge talk (Post)}
It seems like a bug in FBD. Work-around: If you click on the small line between the box and the output variable and delete this, the variable is removed. When you then assign a variable again (Ctrl-A), then you will see that the line will be a bit longer. If you then select the previous variable, you will see that it works.
Last updated: 2025-10-26

Post by farren on How to stay in a method until something is finished. ^{CODESYS Forge talk (Post)}
I know I'm thinking about this wrong -- too many decades of procedural and event-driven programming and only a few months of PLC ST programming...... I've created a visualization with a button that when pushed calls a method. I want the method to take a pressure reading, wait one minute and then take another pressure reading. I'm looking for leaks. I'm using TON for the delay. It seems like what is happening is that the method gets called once and it takes the first reading and starts the TON. But then execution continues, leaves that method call, and the second reading never happens. I can force the method to keep running until the whole thing is done with a While loop, but I understand that is considered BAD in PLC programming. If it push the button again to call the method again, it picks up where it left off and if the timer is complete then it runs the remaining code. How do I keep that method running until it is complete with just one call without using a while loop that ties up the PLC for a minute? Thanks! -Farren
Last updated: 2025-10-31

Post by youness on CSVReaderInit returns error : INVALID_HANDLE ^{CODESYS Forge talk (Post)}
I have Already the same problem when i'm trying to write data more than 10 times in the same file. In fact, i send my data periodicaly to a file that i configured to have permission of W/R in my CodesysContol.cfg. When the Error occurs, i must reboot my machine to success. It means that the problem isn't realted to a limitation of size, but a problem in the function supposed to handle the file. totorovic : allow me to know if you've found a solution to your problem. Thanks.
Last updated: 2025-11-26

Post by denizerm on Deploy Control SL cant find Podman ^{CODESYS Forge talk (Post)}
Problem was solved by installing a package manager.
Last updated: 2025-12-10

Post by nxbp on About Compatibility ^{CODESYS Forge talk (Post)}
Let's say I have a CODESYS controller (PLC) with a runtime version around 3.5.19. If I use development software version 3.5.21.40 or a later version that will be released in the future for programming, could there be any problems or malfunctions in the controller's program execution or in the execution of the new, updated function blocks from the newer software? I mostly work with servo-based motion applications, so please keep that in mind when answering, and provide a detailed answer so I don't have to email you again about this topic.
Last updated: 2025-12-11

Post by rettore84 on Trafo 6DOF ^{CODESYS Forge talk (Post)}
I didn't have a single reference. I used several sources through online reaserach.
Last updated: 2025-12-15

Post by nguyenkhoi on Ethercat Servo Setup ^{CODESYS Forge talk (Post)}
You can buy a license on the store!
Last updated: 2026-01-10

Post by ryusoup on 'keep last value' option in CODESYS EtherCAT ^{CODESYS Forge talk (Post)}
Hello, I’m using CODESYS EtherCAT Master on a Raspberry Pi controller with several remote I/O modules. I’m facing an issue where the input values from the remote I/Os drop to 0 when a connection error occurs. Is there a way to configure a “keep last value” behavior (i.e., hold the last valid input) instead of defaulting to 0 on communication loss? Best regards,
Last updated: 2025-11-18

Post by rtlman on Scan devices hangs CODESYS ^{CODESYS Forge talk (Post)}
Hello, I have a problem that randomly appeared today. When trying to scan a network adapter in "Deploy Control SL" the whole program hangs and needs to be restarted. I have been running "CODESYS v3.5 SP21 Patch 3" for a while and it has worked without any issues until now. I've tried upgrading to "CODESYS v3.5 SP21 Patch 4" with the same result. I've not made any system settings recently that im aware of which could cause this. Has anybody had similar a issue?
Last updated: 2025-12-12

Post by spoun on RaspberryPi 5 gateway problem ^{CODESYS Forge talk (Post)}
I have the same issue, has anyone found a possible solution?
Last updated: 2026-03-27

Post by codegunner on how to convert library from CodeSys 2.3 to CodeSys 3.x ? ^{CODESYS Forge talk (Post)}
hello, ive tried everything and keep getting error like i have opened a file in read only so cannot save no idea what is causing it, file is not read only i cannot even open a new file i make with one variable in 2.3, get same error for read only. do you have a 2.3 file you can send me tomtry and open for a test? thanks
Last updated: 2026-04-29

Post by totorovic on Ladder editor bug with 3.5.21.20 ^{CODESYS Forge talk (Post)}
Can a Codesys member explain this ?
Last updated: 1 day ago

Post by fleaplc on CPU + EtherCAT redundancy ^{CODESYS Forge talk (Post)}
Hi all, for a new project I'm looking for a redundant controller with EtherCAT fieldbus I/O. Actually I'm using Beckhoff and it works great! but there's not a solid redundancy yet... Does someone get experience for industrial application (not raspberry) for a redundant Codesys system? If yes please share some info (CPU / OS type, bus, number of managed I/O,... and especially feeling feedback (stability, bugs, performance)... Every suggestion is kindly appreciated!! Fabrizio
Last updated: 2026-01-27

Post by ilya-vah on Table element issues ^{CODESYS Forge talk (Post)}
Hello, First post here. I would like to clarify whether the following behavior is known or if it is a bugs. Issue 1 — First row not displayed when using Maximum array index with 1-based arrays Description: When displaying data from an array that is indexed starting from 1 (e.g., ARRAY[1..N]), and the number of displayed rows is limited using the Maximum array index property, the first row of the array is not shown in the visualization. Steps to reproduce: Create an array indexed from 1 (e.g., ARRAY[1..N]). Bind the array to a Table element. Limit the number of displayed rows using the Maximum array index property. Run the visualization. Actual result: The first array element (index 1) is not displayed in the table. Issue 2 — Tooltip string placeholder cannot be bound to string variable from array Description: It is not possible to use a string placeholder in the tooltip that is bound to a string variable from the array. Steps to reproduce: Use a table bound to an array containing string variables. Configure a tooltip using a string placeholder referencing a string field from the array. Run the visualization. Actual result: Tooltip doesn't show any text. A test project demonstrating both issues is attached. Thank you for your time and support.
Last updated: 2026-02-16

Post by a-simone on Unable to install previously installed version ^{CODESYS Forge talk (Post)}
Same problem, someone solved it?
Last updated: 2026-02-20

Post by alexgooi on No Bootproject possible ^{CODESYS Forge talk (Post)}
Dear Forum, When using a online-change I often get the following message: No Bootproject possible in this state: application out of memory. Perform full download first. I'm using Codesys virtual control for linux SL running on a docker server with plenty of memory available, therefore I’m not expecting a hardware limitation. Is there a setting available to for example reserve more memory, so the controller is not that quick out of memory? thank you in advance. Alex
Last updated: 2026-03-27

Post by transcend on Movesuperimposed Command Aborted Error ^{CODESYS Forge talk (Post)}
Hello everyone, I am building a 3-axis packaging machine. First, I created a virtual axis and connected the knife to the virtual axis using a CAM. I also linked the conveyor system to the virtual axis with GearIn. However, I’m facing the following issue: when I use SUPERIMPOSED to change the conveyor’s motion, I get a COMMAND ABORTED error. The exact error is: SMC_ERROR.SMC_FB_WASNT_CALLED_DURING_MOTION. Why am I getting this error?
Last updated: 2026-04-11

Post by ph0010421 on Network variable stops sending ^{CODESYS Forge talk (Post)}
SP21...yes, Online change definitely causes a problem aswell.
Last updated: 2026-05-07

Post by tk096 on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Meanwhile, I would like to understand why the motion FB instances must still be called even after the Execute is set to FALSE, especially in view of the fact that the next instruction is programmed to abort the previous one, with BufferMode set to 'Aborting'. All these unnecessary FB calls are an unnecessary overhead on the CPU anyway. Is there any precise rule about when to cease calling the various instances? (It should precisely be the 'done' status that says this one has finished its work). In general: - Motion function blocks have to be called until they report 'Done', 'Error', 'CommandAborted' or a subsequent motion FB with BufferMode=Aborting is started in the current cycle. - Setting the Execute input to FALSE will not abort any ongoing motion of the motion function block. For example, one case that is often problematic is the execution of the Axis Halt instruction. When, after a MoveAbosulte instruction this returns the event as 'done' and indeed the axis is in standstill, the state machine first sets the move instruction to FALSE, and the next cycle sets the Halt request to TRUE. Some of the time everything works out fine. Occasionally, however, in this exchange, the axis goes into fault, also losing the OPERATIONAL state. I think the error SMC_FB_WASNT_CALLED_DURING_MOTION is only a follow-up (and misleading) error that results from the axis not being in operational state anymore (bus problems). Is there an error 'regulator or start not set' in the device log before the error 'motion generating FB wasn't called for at least one cycle'? Which error does the respective function block (Halt.ErrorId) report?
Last updated: 2024-07-22

Post by dawidr on Best practices for querying multiple MODBUS devices ^{CODESYS Forge talk (Post)}
Hi! What are the best practices for querying multiple Modbus devices? Single PRG or maybe multiple PRG (so basically multiple thread) per each Modbus device. In my current implementation I'm using single PRG and I'm utilizing FbMbMasterMultiQuerySerial and WagoAppPlcModbus.FbDigitalTwinMbSlaveDevice in eCockpit with PFC200. I've the timer with 2 seconds delay there and it was working fine for single device. But now I have three Modbus devices and for two of them I need to run 2/3 queries to get data from all registers. I noticed that the delays for getting the data from the Modbus devices is much bigger right now.
Last updated: 2024-07-31

Post by khaledkhalil on Question about the hairaichy of UaExpert ^{CODESYS Forge talk (Post)}
Hello, I am Examining this Example from Codesys Tutorial about OPC-UA server here https://www.youtube.com/watch?v=aJhzN3Uk-Do&list=PLWtD08CpmZcSV26aWh1axCAef5c5HxX-3&index=1&t=1167s. Now i am running to problem, when i create instances and i want them to appear directly under the object directory, However, it always appear with me under Objects >> Device set >> Device Name in CODESYS. I need to know how i can change the directory of my instances 'inst_3' and so on. So they can be under objects directly. I tried to modify the settings, but couldn't find any leads till now. Thanks in advance for helping
Last updated: 2024-09-12

Post by edson-bueno on IFM Controller Connection Issue ^{CODESYS Forge talk (Post)}
Hi, Could you please send an print of your ethernet adapter info? Ip addr Subnet Mask Default Gateway Also, check if the gateway service is active in your windows. Win+R > services.msc > Look in the list CODESYS Control Win V3 x64 Gateway OR CODESYS Gateway V3 Hook up the M12 code D into the ETH port, supply the controller, it should apperars to you. Make sure when you try to connect with the controller, the target of your project has to match with the controller. Otherwise, click on the device in the devices tree > Communications Settings tab > Device > Options > And disable "Filter Network Scans by Target ID". Good luck.
Last updated: 2025-05-29

Post by royw on Profinet Library für C# ^{CODESYS Forge talk (Post)}
Hallo, ich weiß nicht ob ich hier richtig bin und ob es überhaupt möglich ist ... Ich suche eine Möglichkeit ein Profinet Device mit Record Read und Write anzusprechen. Eigentlich brauche ich nur sehr wenige Kommandos um unser Device zu konfigurieren. Das bedeutet setzen der MAC Adresse und einer Seriennummer. Das würden wir gern aus einem C# Programm herus machen. Nun sind wir auf der Suche nach einer Bibliothek o.ä. . Da man es ja auch aus Codesys heraus machen, dachte ich mir, gibt es eventuell eine DLL o.ä. die man dafür nutzen könnte. Wie gesagt wir wollen keine Realtime Abfragen der zyklischen Daten sondern lediglich Record read/write. Hat da jemand einen helfenden Hinweis ? Schon mal vielen Dank im Voraus
Last updated: 2023-12-22

Post by bfunk on Wago 750-8101 (mit Codesys V3) als Profinet device ^{CODESYS Forge talk (Post)}
Moin, ich habe da ein Problem und komme einfach nicht weiter... Ich moechte eine Wago 750-8101 (mit Codesys V3) zu einem ModBus TCP Slave und einem Profinet slave machen. ModBus habe ich hinbekommen, Profinet bekomme ich einfach nicht hin. habt ihr das evtl. einen hilfreichen Tip fuer mich? Programmiert wird mit Codesys V3.5 SP19 Patch 2 Auf dem Zielsystem (PFC100) ist die Zielsystemversion 4.6.0.0 Das es nicht optimal ist PN und ModBus TCP auf einer Schnittstelle zu haben ist mir bewusst. Wollte aber erstmal ModBus und Profinet zum laufen bekommen bevor ich das Profinet auf die 2. Ethernet-Schnittstelle bringe. /etc/CODESYSControl_User.cfg [SysSocket] Adapter.0.Name="br0" Adapter.0.EnableSetIpAndMask=1 Adapter.1.Name="br1" Adapter.1.EnableSetIpAndMask=1 ist eingetragen. so sieht der Status fuer das PN-device aus. Anbei ein Screenshot.
Last updated: 2024-01-16

Post by karol-abktech on Raspberry and problem with runtime ^{CODESYS Forge talk (Post)}
Hi, My problem is with raspberry pi 4 with 2 GB ram,. Install codesys is correct but runtime works only few seconds or I can connect with device few seconds. I can ping raspberry and in system info I can see " !!!! Warning: no runtime license - running in demo mode(~2 hours)" but it is 2 minutes after runtime. When I press Start runtime I have another few seconds when I can connect to raspberry. After this time I couldn't find device. Of course, reapet start runtime works every time on few second. Raspberry is new and works with fresh install raspberry os 32 bit. Where should I start looking for solve of my problem ?
Last updated: 2024-02-14

Sort by relevance or date