Post by talhaali on Adding a variable from text list into ST code ^{CODESYS Forge talk (Post)}
Hi, can I use a entry of a text list as variable in structured text? for example in attach picture, if i use want to use data of first row. I am trying to write: A : STRING := TextList.Default.0; but it is not workings
Last updated: 2023-12-07

Post by talhaali on Adding a variable from text list into ST code ^{CODESYS Forge talk (Post)}
Hi, can I use a entry of a text list as variable in structured text? for example in attach picture, if i want to use data of first row. I am trying to write: A : STRING := TextList.Default.0; but it is not workings
Last updated: 2023-12-07

Post by stiller on OPC UA RPI 4.8.0.0 Status Code / "out of range" ^{CODESYS Forge talk (Post)}
Hello, I have an OPC-UA server with an information model. For many values, there is a defined range (e.g., 0 to 100). If a client enters a value outside this range (e.g., 120), the StatusCode should change to Bad. How can I accomplish this? Any help is appreciated! Thank you in advance. Best regards, Christian Stiller
Last updated: 2024-07-10

Post by tk096 on Some 'pathetic' errors in SoftMotion program ^{CODESYS Forge talk (Post)}
Hi, I suppose that you are referring to the error code "SMC_FB_WASNT_CALLED_DURING_MOTION"? Starting of Softmotion version 4.15.0.0 the instance path of the function block that has not been called is logged into the device log. This might help you to identify why it has not been called.
Last updated: 2024-07-18

Post by docker on Webvisu client connection monitoring ^{CODESYS Forge talk (Post)}
Hi, i am interested in this thread and have tried a couple of the above examples in to determine remote webvisu access. I am having trouble getting the lastusage variable to refresh during runtime? It seems to only log the last usage at initialisation and that is it? how do i gain ongoing access to the time variable as the code is running? Thankyou.
Last updated: 2024-08-26

Post by dengsberg on Disable Communications to 'Modbus_Server_COM_Port' from the logic ^{CODESYS Forge talk (Post)}
I have a serial Modbus RTU communicating to the Slave device. But when the control system is not in Run there is no power applied to one of the Modbus Devices. Can I enable / disable the communications to that Modbus Slave in the code based on my running mode, so I don't get all the errors?
Last updated: 2024-08-29

Post by eozupek on problem con file transfer in raspberry ^{CODESYS Forge talk (Post)}
I recently acquired the Opus B4 product from topcon company and encountered a "code 7" error in the Web Visu File Transfer application. I have been unable to locate the CFG files mentioned above. However, I have been able to perform streaming. I would appreciate your assistance in resolving this issue. Sincerely, Emre öZÜPEK
Last updated: 2024-09-03

Post by dkugler on User management ^{CODESYS Forge talk (Post)}
If the PLC is equieped with a USB socket it's possible to copy the user management file via IEC code to a USB stick and restore it at the new plc. The file is located there: /PlcLogic/visu/app_visuusermgmtdb.csv I use this to reset the user management to default in case of the customer has changed passwords and lost it.
Last updated: 2024-09-04

Post by egau on Hard shutdown: no code on device after power on ^{CODESYS Forge talk (Post)}
Hi, thanks for the fast response :) Yes I Have a .err file. Sorry I forgot to upload it. It is a binary file though... "Runtime goes in exception before the shutdown ?" I think it goes into exception at the same time as the power is lost...
Last updated: 2024-10-03

Post by davidmic on What is this ST syntax? ^{CODESYS Forge talk (Post)}
I found some structured text code which contained this statement: bHidden:= TRUE(*NOT _somevariable*) I haven't seen TRUE() used like a function before, and I also haven't seen the enclosing asterisks * * before. What do they do? (sorry if this is a duplicate question, I don't know what words to use to search for this syntax)
Last updated: 2024-10-11

Post by csu-chris on No file found ^{CODESYS Forge talk (Post)}
I'm having trouble getting started with the SysFile library. I tried copying and running the code found here: https://forge.codesys.com/forge/talk/Engineering/thread/f17c3d0e64/ Every time I try to run the file handle pointer returns: 16#FFFFFFFFFFFFFFFF <dereference of="" invalid="" pointer=""></dereference> I can see the file when I look in the Device -> Files window Any idea what I'm doing wrong?
Last updated: 2024-10-15

Post by pixsys on loading delay with the option "check client animations and overlay of native elements" ^{CODESYS Forge talk (Post)}
Hi, the option "Support client animations and overlay of native elements" needs a very powerful graphics accelerator in the system. I'm using the Pixsys srl "TC series" HMI with the code "P3" (so a 4+4 cores CPU) that runs very well also with this option active.
Last updated: 2024-11-06

Post by winki on Warning attribut no_assign ^{CODESYS Forge talk (Post)}
Hello, I have two warning on my code, and I would like to understand why. C0540: Attribut 'no_assign' missing for the 'FB_MOdbusReadHolding'. The type of the variable clientTcp is set to 'no_assign'. In this FB, I have done: clientTcp : ModbusFB.ClientTCP; clientRequest : ModbusFB.ClientRequestReadHoldingRegisters; The error comes from clientTcp : ModbusFB.ClientTCP; I am using ModbusFB 4.4.0.0. Thx a lot
Last updated: 2025-01-10

Post by winki on Warning attribut no_assign ^{CODESYS Forge talk (Post)}
Hello, I have two warning on my code, and I would like to understand why. C0540: Attribut 'no_assign' missing for the 'FB_MOdbusReadHolding'. The type of the variable clientTcp is set to 'no_assign'. In this FB, I have done: clientTcp : ModbusFB.ClientTCP; clientRequest : ModbusFB.ClientRequestReadHoldingRegisters; The error comes from clientTcp : ModbusFB.ClientTCP; I am using ModbusFB 4.4.0.0. Thx a lot
Last updated: 2025-01-10

Post by fabiodasilveira on PLC Shell commands via ST Code ^{CODESYS Forge talk (Post)}
Thank you, Bingo. I have added the instructions below to the CODESYSControl.cfg file, but they haven't changed anything. [SysSocket] Adapter.0.Name="ETH0" Adapter.0.EnableSetIpAndMask=1 Adapter.1.Name="ETH1" Adapter.1.EnableSetIpAndMask=1 Regarding your second suggestion, could you please expand a bit on that?
Last updated: 2025-03-03

Post by tvm on VisuFbFrameBase.SetInputPositionData: The element id for the input position cannot be determined ^{CODESYS Forge talk (Post)}
This came up again today, so I'll post the fix for future reference. Happens with Schneider Machine Expert 2.2 and M262 controllers. Add this bit of code to a program called from the visu task //disable "VisuFbFrameBase.SetInputPositionData" log messages, which fill up the logs IF VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.GetListenerCount() > 0 THEN VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.RemoveValueChangedListener(VisuElems.Private_Visu_Globals.g_ValueChangedListenerManager.listenerForOnValueChanged); END_IF
Last updated: 2025-03-06

Post by davidbo on How do I stop/start logging in my code using AC_Datalog with composer ^{CODESYS Forge talk (Post)}
I have on my Pi successfully deployed an application to which with composer AC_Datalog is added. It starts logging automatically. I want a Visualization with a start/stop button controlling the logging. That must be easy. How do I do that?
Last updated: 2025-07-07

Post by timvh on Current Visu name without Current Visu Variable ^{CODESYS Forge talk (Post)}
To change the current visualization for (all) webclients: Add the library “Visu Utils” and use the following example code: VAR xChangeVisu: BOOL; fbChangeVisu : VU.FbChangeVisu; END_VAR // Change to Visu2 when setting xChangeVisu to TRUE fbChangeVisu( xExecute:= xChangeVisu, xDone=> , xBusy=> , xError=> , itfClientFilter:= VU.Globals.OnlyWebVisu, //itfFilter, eError=> , sVisuName:= 'Visu2'); IF fbChangeVisu.xDone OR fbChangeVisu.xError THEN xChangeVisu := FALSE; END_IF
Last updated: 2025-08-13

Post by davemansell on explicit cast ENUM to UINT and vice versa ^{CODESYS Forge talk (Post)}
This is from sometime ago but below might help someone else; this could be done via POINTERS. Make sure you protect for NULL pointers etc if you take this approach. // DECLARATION myEnumValue : enumMyEnum; u8 : USINT; pmyEnumValue : POINTER TO enumMyEnum; pu8 : POINTER TO USINT; // CODE pu8 := ADR(u8); pmyEnumValue := pu8; myEnumValue := pmyEnumValue^; // dereference the pointer
Last updated: 2025-08-21

Post by davemansell on explicit cast ENUM to UINT and vice versa ^{CODESYS Forge talk (Post)}
This is from sometime ago but below might help you could do this via POINTERS. Make sure you protect for NULL pointers etc if you take this approach. // DECLARATION myEnumValue : enumMyEnum; u8 : USINT; pmyEnumValue : POINTER TO enumMyEnum; pu8 : POINTER TO USINT; // CODE pmyEnumValue := pu8; myEnumValue := pmyEnumValue^; // dereference the pointer
Last updated: 2025-08-21

Post by kio123 on SysFileOpen not working ^{CODESYS Forge talk (Post)}
I have exactly the same problem and tried entering “ForceIecFilePath=0” in the file “CODESYSControl.cfg” ([SysFile]). Unfortunately, this was unsuccessful. Can anyone help in the meantime, e.g., with some sample code or with the FAQ that TimvH refers to above (link no longer works)? Many thanks and best regards
Last updated: 2025-09-15

Post by aniket-b on How to protect library project? ^{CODESYS Forge talk (Post)}
I have library projects which has few function blocks. I have assigned security to each FB. I want to protect them and user can only be able to use it without viewing the code inside. What kind of file I should send to user? Is it compiled library file?
Last updated: 2024-01-22

Post by dav3 on Exception auf Raspberry, CMCommCycleTask Tainted ^{CODESYS Forge talk (Post)}
Hello, I don't really know what my problem was, but it's working for me at the moment. All i did was to change my code because of some REAL_TO_INT conversions, like i wrote above. And later a complete new Pi setup (because of 64x support with 4.10.0.0 now).
Last updated: 2024-02-16

Post by xabier on See only variable ^{CODESYS Forge talk (Post)}
I have declarated this variable...When i use the variable I see all...I wan see only the variable not all. For example I declarated in GVL_GLOBAL ==> Torque_Mode When I push enter insert in code all rute..GVL_GLOBAL.Torque_MOde...I want see only torque mode...How is possible resolved this problem?? Thanks XABI
Last updated: 2024-03-14

Post by thomaspfrimmer on Can't import enums OnlineChangeOption / ResetOption ^{CODESYS Forge talk (Post)}
Hello Jusito, Can you share your final code, please ? I tried to implement a similar feature (going online, doing the reset and the start). But I get a timeout on the reset/start when I'm testing the script. If you got something working, I would appreciate to see it.
Last updated: 2024-04-11

Sort by relevance or date