SMC_ERROR.SMC_AXIS_NOT_READY_FOR_MOTION when using Drive Virtual ^{CODESYS Forge talk (Thread)}
SMC_ERROR.SMC_AXIS_NOT_READY_FOR_MOTION when using Drive Virtual
Last updated: 2025-11-29

Post by salvatorethomas on Port instantiation of serial interface in WAGO PLC using Modb_L05.lib in CoDeSys v2.3 ^{CODESYS Forge talk (Post)}
Hi — good description of the problem. A few suggestions / questions that might help narrow this down: Since your first serial port (COM2) works fine but the second (COM4 + MODBUS_EXT_MASTER) never opens, check whether the two ports are truly independent — some WAGO modules share internal resources, so COM4 might conflict with other functions or modules. Make sure that the physical wiring and module configuration for the second port (baud rate, flow control, RS-485 vs RS-422, etc.) exactly match what the library expects — a mismatch in flow control or wiring could prevent port opening even if the LED signals seem OK. Try using a plain SERIAL_INTERFACE on COM4 first (like you did for COM2) without Modbus logic — if that opens, you know the hardware + port config is fine, so the issue is more likely with modb_L05.lib. If the port opens but Modbus still fails, enable debug/logging (if available) to inspect whether the port opening fails or the subsequent Modbus negotiation fails. If you like — I can share a minimal example project I used with WAGO + COM4 + Modbus that worked; you could adapt that to test your setup. Wacky Flip
Last updated: 2025-12-01

Port instantiation of serial interface in WAGO PLC using Modb_L05.lib in CoDeSys v2.3 ^{CODESYS Forge talk (Thread)}
Port instantiation of serial interface in WAGO PLC using Modb_L05.lib in CoDeSys v2.3
Last updated: 2025-12-01

TCP Server ^{CODESYS Forge talk (Thread)}
TCP Server
Last updated: 2025-12-01

Post by jbcregen on Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Post)}
Confirmed. The Data Analyzer tool can indeed access all OPC-UA symbols. Thanks !
Last updated: 2025-12-02

Accessing parameters from a structure or function block with the web interface ^{CODESYS Forge talk (Thread)}
Accessing parameters from a structure or function block with the web interface
Last updated: 2025-12-02

Assistance for MQTT configure with external broker (Mosquitto) ^{CODESYS Forge talk (Thread)}
Assistance for MQTT configure with external broker (Mosquitto)
Last updated: 2025-12-03

Post by ranadheer on Assistance for MQTT configure with external broker (Mosquitto) ^{CODESYS Forge talk (Post)}
Hi everyone Am trying to make establish MQTT connection , where am using IIOT example for this as a demo mode. where i had given IP-address of of local Linux application as a 172.31.239.67 and port number as 1883 in the PLC_PRG itself, and preparing the publish message by manually as " this is from published message", and this should receive at the subscriber side. Aim: To make communicate external publisher to the CODESYS by using MQTT protocol. By any chance having reference documents about this implementation please share here. and suggest the process to make it possible. I had uploaded reference project file after updating address in th PLG_PRG, kindly assist to configure with the broker
Last updated: 2025-12-03

Post by harryc on Soft Container License issue with ARM64 Linux ^{CODESYS Forge talk (Post)}
Hi, We are working to provide our customers with CODESYS operation on our hardware product ( https://elprotech.com/product/el-qe-e-quantum-edge-series/ ). I'm trying to enable a CODESYS license (Soft container) on our product running ARM64 linux. This problem am having looks similar to here: https://forge.codesys.com/forge/talk/Runtime/thread/6d29b6b4de/ and here: https://forge.codesys.com/forge/talk/Runtime/thread/a2d0c63375/; but I am not running docker, and I am not re-installing a license. This is first time install. I have CODESYS Control SL running on my device, as well as CodeMeter. I purchased a license, and installed it to the CODESYS Development system, (Tools >> License Repository) then tried to install to the device (Tools >> License Manager >> o Device >> o Soft container >> Remote [0001] >> OK. This gives me the "License Manager - Overview" dialog, and the message "Licensing info not available. There is no dongle attached to the device." Below shows the running applications, installed packages, and current content of /var/opt/codesys Also attached screenshots of the Development software as I go through the steps to install the license. # # ps | grep -e "code" -e "CodeMeter" 1391 daemon /usr/sbin/CodeMeterLin 1407 root /opt/codesys/bin/codesyscontrol.bin /etc/codesyscontrol/CODESYSControl.cfg 1442 root /opt/codesysedge/bin/codesysedge.bin /etc/codesysedge/Gateway.cfg 29229 root grep -e code -e CodeMeter # dpkg -l Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-==============-=============-============-============================================================================================== ii codemeter-lite 8.20.6539.500 arm64 WIBU CodeMeter minimal runtime ii codesyscontrol 4.14.0.0 arm64 codesyscontrol based on SDK 3.5.20.40 , from Fri Nov 29 08:35:37 CET 2024 [265], Release build ii codesysedge 4.14.0.0 arm64 codesysedge based on SDK 3.5.20.40 , from Fri Nov 29 08:34:19 CET 2024 [265], Release build # ls -la /var/opt/codesys total 208 drwxr-xr-x 6 root root 4096 Nov 7 05:31 . drwxr-xr-x 1 root root 4096 Nov 6 08:33 .. -rw-r--r-- 1 root root 23515 Nov 7 07:26 .Audit.log -rw-r--r-- 1 root root 160 Nov 7 05:31 .GroupDatabase.csv -rw-r--r-- 1 root root 160 Nov 7 04:37 .GroupDatabase.csv_ -rw-r--r-- 1 root root 20736 Nov 29 2024 .SoftContainer_CmRuntime.wbb -rw-r--r-- 1 root root 1982 Nov 29 2024 .UFC_SoftContainer_CmRuntime.WibuCmLif -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv -rw-r--r-- 1 root root 229 Nov 7 04:35 .UserDatabase.csv_ -rw-r--r-- 1 root root 11807 Nov 7 05:30 .UserMgmtRightsDB.csv drwxr-xr-x 6 root root 4096 Nov 6 08:30 .pki drwxr-xr-x 3 root root 4096 Nov 6 08:30 OPCUAServer drwxr-xr-x 7 root root 4096 Nov 6 08:30 PlcLogic -rw-r--r-- 1 root root 13 Nov 6 08:30 SysFileMap.cfg -rw-r--r-- 1 root root 2640 Nov 29 2024 bacstac.ini drwxr-xr-x 4 root root 4096 Nov 6 08:30 cert -rw-r--r-- 1 root root 94105 Nov 7 07:25 codesyscontrol.log # # uname -a Linux Remote 6.1.22 #5 SMP PREEMPT Tue Nov 18 11:35:46 AEST 2025 aarch64 GNU/Linux #
Last updated: 2025-12-04

Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Thread)}
Non-formal invocation of function blocks in CODESYS
Last updated: 2025-12-04

Post by sb879 on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
Is it possible to do non-formal invocation of function blocks in CODESYS? I get an error when I try, see the attached pic. Also attached a pic from IEC 61131-3 describing non-formal invocations.
Last updated: 2025-12-04

Post by sb879 on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
Is it possible to do non-formal invocation of function blocks in CODESYS? I get an error when I try, see the attached pic. Also attached a pic from IEC 61131-3 describing non-formal invocations.
Last updated: 2025-12-04

Post by somlioy on Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Post)}
No that is not possible for function blocks, although it is possible to that with methods and functions as you see in your second pic.
Last updated: 2025-12-05

Non-formal invocation of function blocks in CODESYS ^{CODESYS Forge talk (Thread)}
Non-formal invocation of function blocks in CODESYS
Last updated: 2025-12-05

Post by adam-eita on Power off ^{CODESYS Forge talk (Post)}
bro really thanks, i have trying to figure out this in several hours without any progress.
Last updated: 2025-12-05

Power off ^{CODESYS Forge talk (Thread)}
Power off
Last updated: 2025-12-05

Post by eschwellinger on Soft Container License issue with ARM64 Linux ^{CODESYS Forge talk (Post)}
van you execute cmu -x to see if dongle and softcontainer are available.
Last updated: 2025-12-08

CAN and CANopen on Raspberry PI - steps or tutorial? ^{CODESYS Forge talk (Thread)}
CAN and CANopen on Raspberry PI - steps or tutorial?
Last updated: 2025-12-09

Post by ranadheer on Publish Multiple Topics via MQTT ^{CODESYS Forge talk (Post)}
could you suggest the process you followed to make publish the data through the broker application (Mosquitto)
Last updated: 2025-12-10

Publish Multiple Topics via MQTT ^{CODESYS Forge talk (Thread)}
Publish Multiple Topics via MQTT
Last updated: 2025-12-10

Post by ranadheer on Publish Multiple Topics via MQTT ^{CODESYS Forge talk (Post)}
could you suggest the process you followed to make publish the data through the broker application (Mosquitto)
Last updated: 2025-12-10

Post by eld-t on Change Git local repository folder name ^{CODESYS Forge talk (Post)}
Hi, how do you change the Git local repository folder name? It is called "project" by default, so we would like to rename it to something more descriptive especially for the remote repo's sake. Thanks!
Last updated: 2025-12-10

Post by aldo on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
I have everything updated to the latest versions, but the problem persists. Thanks
Last updated: 2025-12-10

How to read effective version of libraries? ^{CODESYS Forge talk (Thread)}
How to read effective version of libraries?
Last updated: 2025-12-11

Post by yannickasselin on Access to the path *** is denied ^{CODESYS Forge talk (Post)}
You can still start Codesys as administrator as a workaroud.
Last updated: 2025-12-11

Sort by relevance or date