CAA 3.5.16 TLS configuration - certificate ^{CODESYS Forge talk (Thread)}
CAA 3.5.16 TLS configuration - certificate
Last updated: 2026-03-23

No connection could be made because the target machine actively refused it ^{CODESYS Forge talk (Thread)}
No connection could be made because the target machine actively refused it
Last updated: 2026-03-23

Digital Clock ^{CODESYS Forge talk (Thread)}
Digital Clock
Last updated: 2026-03-23

Post by poliautomacao on Absolute movement controlled by an external encoder. ^{CODESYS Forge talk (Post)}
Hello, I made this configuration, I'm moving the encoder value to SM_Driver_PosControl.in.wActPosition. When I make the absolute movement of my PosControl axis, my physical drive axis rotates perfectly, but I noticed that the movement is not followed by the encoder. That is, if I hold the encoder and keep it in position 0, the PosControl axis makes the absolute movement of 314 mm and stops, which is strange because the encoder is at 0. Theoretically, the PosControl axis should accelerate to try to compensate for the movement error. I haven't yet achieved perfect functionality.
Last updated: 2026-03-24

_NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch. ^{CODESYS Forge talk (Thread)}
_NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch.
Last updated: 2026-03-24

Post by aapostolidis on _NEW when used with classes and interfaces. Interface shows "Hidden Instance" in watch. ^{CODESYS Forge talk (Post)}
Hello, im using dynamic memory allocation with the NEW()-operator. When i instanciate a class with the NEW()-operator and want to debug/watch the interface of the class, the watch is only showing "Hidden Instance" (See attached screenshot). Is there any possibility to debug the interface data ? The interface is working properly but the debugging by the watch is not possible, what is a big disadvantage. Thank you. Best Regards, Alexander
Last updated: 2026-03-24

Post by lukasz on Unresolved reference when trying to upload to Codesys Runtime V3 ^{CODESYS Forge talk (Post)}
Hello! I'm working with Codesys SP21 Patch 4. The project builds without any errors. When trying to upload my project to Codesys Runtime V3 x64 I get a lot of Unresolved Reference errors, all with FU- at the start and then -CLOSELAYER2, -GETBUSINFO, -GETFRAME etc. I also get a error pop-up that I should 'update device' in the project but it's not specified to which version or anything useful really.There's also not much to choose from. When I check Runtime version in the systray I get 3.5.21.40 and it's the same as I have set up in the project as the device. All information I get is that it should be clear from the errors but no useful information is provided in the errors. Do I need to install some library? I checked other posts and for different reference error and this was the answer. Thanks in advance!
Last updated: 2026-03-25

Post by tommyk-mar on Smooth path is not working with SMC_NCInterpreter ^{CODESYS Forge talk (Post)}
Hello, Im using SMC_NCInterpreter and SMC_NCReadFile2 to read gcode program for CNC machine and what I have observed is that G51 and G52 is not smoothing the path. Machine stops in every point, what could I do to make machine pass through the points without stopping or what could allow me to use smooth path corretly if I use NCInterpreter. Im using it because I want to add variables to my gcode and its not possible directly from the CNC editor thats why I do use external file. Any ideas?
Last updated: 2026-03-26

Post by gseidel on Absolute movement controlled by an external encoder. ^{CODESYS Forge talk (Post)}
Hi polyautomacao, hmm, did you tune the PD parameters as shown in the link I posted above? One thing that could cause the behavior are bad parameters. I also don't understand the screen shot: when you hold the encoder to 0, why is the actual position of the DrivePosControl -208? Best regards, Georg
Last updated: 2026-03-27

Post by alexgooi on No Bootproject possible ^{CODESYS Forge talk (Post)}
Dear Forum, When using a online-change I often get the following message: No Bootproject possible in this state: application out of memory. Perform full download first. I'm using Codesys virtual control for linux SL running on a docker server with plenty of memory available, therefore I’m not expecting a hardware limitation. Is there a setting available to for example reserve more memory, so the controller is not that quick out of memory? thank you in advance. Alex
Last updated: 2026-03-27

CODESYS device discovery performance in large networks (/16) ^{CODESYS Forge talk (Thread)}
CODESYS device discovery performance in large networks (/16)
Last updated: 2026-03-29

Post by thierry-b on CODESYS device discovery performance in large networks (/16) ^{CODESYS Forge talk (Post)}
Hello, We are using CODESYS 3.5 SP19.70 in an educational environment with several WAGO PFC200 controllers (CODESYS Runtime). Our campus network is currently configured as a /16, which creates a very large broadcast domain. We observe slow device discovery and long scan times when opening the network view. Before restructuring our architecture, we would like to know the recommended network practices for CODESYS: Recommended broadcast domain size for device discovery Possible impact of large networks (/16) on scan performance Usual recommendations (VLANs, /24 segmentation, etc.) Known limitations or points of attention in extended networks Any guidance or official recommendations would be very helpful. Thank you.
Last updated: 2026-03-29

Post by husarz17 on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
I need the same issue. In my application TCP server on raspberry (codesys) should have UnitID 1. But it only works when I am requesting with UnitID 255. And my application can't work with this parameters...
Last updated: 2026-03-31

USB Communication for IP Configuration & Application Update – STM32H Series PLC ^{CODESYS Forge talk (Thread)}
USB Communication for IP Configuration & Application Update – STM32H Series PLC
Last updated: 2026-03-31

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Please explain how you configured that. Normaly, the Server should answer to all UID as long as gateway isn't activated. With activated gateway all UID will be forwarded to Serial-Interface, in taht case 255 has to be used for Gateway-Diagnostics. So that means, there is somethink wrong on your configuration. Which CDS-Version, Which Runtime-Version and so on are used.
Last updated: 2026-04-01

Post by husarz17 on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
My codesys is 3.5.21.30. I am using function ModbusServer from library ModbusTCP_Slave. The reason is that I need share 9000 Holding registers. By standard configuration it is only 4096. fbMbTcpDevice: ModbusTCP_Slave.ModbusServer; fbMbTcpDevice( wPort := 502, pInputData := ADR(awInputReg), pOutputData := ADR(awHoldingReg), uiInputDataSize := 10, uiOutputDataSize := 9000, xEnable := TRUE, tTimeout := 10000, InterfaceName := "eth0", xBusy => xBusy, xError => xError, byClientConnections => byConnections ); Ethernet port is cofigured: Network interface: eth0 IP address: 10.10.22.55 Subnet maskL 255.255.255.0 Default gateway: 0.0.0.0 And it only works when I am reading registers with ID 255 by Modbus Poll. Any other IDs don't work. The actual TCP client device try to read registers with ID 1 and I can't change it... Thanks in advance for your help!
Last updated: 2026-04-01

Post by nulltrace on How change Unity-ID in TCP Modbus Slave ^{CODESYS Forge talk (Post)}
Hey Husarz, thanks for your Message, now i understand your Problem, also able to reproduce that. Pls. give me a Short Time to Check some stuff on this, i'll come back to this Topic with news ASAP. Greetings
Last updated: 2026-04-03

Post by mait-tim on Unknown Type ^{CODESYS Forge talk (Post)}
Hello, Im working with EPEC PLC's and working on the HMI and i'm running into the following errors: Unknown Type ISOImages.TargetContainer.TDS (and similars) I cannot locate the error and the source position is the visutalisation manager where i cannot find anything related to this type. Im working with: Codesys V3.5 SP18 patch 3 and i cannot update since the hardware does not allow for newer SP versions
Last updated: 2026-04-03

Post by reinier-geers on API webclient ^{CODESYS Forge talk (Post)}
Fur ein jahr ein webclient lisence gekauft. Aber immer funktioniert es noch nich. Mach ik es auf internet bekomme ich daten. Aber mit codesys bekomme ich - Query fehler ... - ein switch die abschalt - oder den controller hangt mal wieder Hat eine dar erfahrung? Kan ich in den FB sehen was da pasiert ?
Last updated: 2026-04-05

Post by nicolasquintin on Codesys Installation Always Freeze when the installing is almost done ^{CODESYS Forge talk (Post)}
Indeed that worked, thanks!
Last updated: 2026-04-05

Codesys Installation Always Freeze when the installing is almost done ^{CODESYS Forge talk (Thread)}
Codesys Installation Always Freeze when the installing is almost done
Last updated: 2026-04-05

Post by reinier-geers on Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Post)}
Hi. Is there a website to test my webclient ? When i do a web api test on internet it works. But with codesys ill get an error. So is there a website to tests what im sending ? or a way to look in to the Codeys FB Webclient ?
Last updated: 2026-04-05

Post by reinier-geers on Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Post)}
Hi. Is there a website to test my webclient ? When i do a web api test on internet it works. But with codesys ill get an error. So is there a website to tests what im sending ? or a way to look in to the Codeys FB Webclient ?
Last updated: 2026-04-05

Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Thread)}
Virtual Api to vieuw what im sending
Last updated: 2026-04-05

Virtual Api to vieuw what im sending ^{CODESYS Forge talk (Thread)}
Virtual Api to vieuw what im sending
Last updated: 2026-04-05

Sort by relevance or date