Post by dkugler on Codesys SVN
CODESYS Forge
talk
(Post)
Don't set on SVN. The service phase has started in March 2024 and will be discontinued in 2027. We actually use SVN and have to switch to GIT in the future. As I informed, there is no way of getting a single SVN or GIT licence. I' dont understand, why Codesys forces us customers to pay for an expensive Professional Edition paket from year to year using only one part of it! If you find a way to buy a single licence, let me know.
Last updated: 2024-04-29
Post by timvh on Codesys SVN
CODESYS Forge
talk
(Post)
If you use 3.5 SP10, then Git is not supported. SVN will work fine, but with this version you do need a USB key, because software licenses are not supported with this version. Off course you can work without SVN (or Git), but especially if you work with multiple developers on one project, it will save you a lot of time and you can keep track of all changes and improvements much easier. So how much is this worth to you?
Last updated: 2024-04-30
Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part. I am able to capture the received data of client side in wireshark But unable to capture it on the codesys
CODESYS Forge
talk
(Thread)
Hi, I try to send and receive data using a UDP connection via SysSocket 3.5.17.0. While sending data works fine, I have problems with the receiving part. I am able to capture the received data of client side in wireshark But unable to capture it on the codesys
Last updated: 2024-06-03
Post by kris-samoy on Get Alarm status in Codesys
CODESYS Forge
talk
(Post)
I am rather new to Codesys and I'm trying to figure out how to get the status of an alarm. This to interlock the start of a device until the alarm has been acknowledged... I am not sure if IAlarm.GetState (METH) can be used for this purpose. If yes then could someone please briefly explain how to use this? https://content.helpme-codesys.com/en/libs/AlarmManager/4.1.0.0/Interfaces/pou-IAlarm/GetState.html Thx & grtz, Kris
Last updated: 2024-06-03
Post by swe-hob on call of a method of a function block in another program
CODESYS Forge
talk
(Post)
Hi, Let's assume following: PRG_1 fb_1 : fbExample1; fb_1.method_1 do something... PRG_2 fb_2 : fbExample2; fb_2.method_2 if xTest then PRG_1.fb_1.method_1(); end_if; Is there a reason why runtime hangs when I call the method_1 in PRG_1 from a method in PRG_2? Both programs run in the same task. No chance that any other program calls the method. What I practically do there is that in the program PRG_2 I add a structed object into a buffer. In PRG_1 I just process the items in the buffer.
Last updated: 2024-06-03
Post by swe-hob on call of a method of a function block in another program
CODESYS Forge
talk
(Post)
Hi, Let's assume following: PRG_1 fb_1 : fbExample1; fb_1.method_1 do something... PRG_2 fb_2 : fbExample2; fb_2.method_2 if xTest then PRG_1.fb_1.method_1(); end_if; Is there a reason why runtime hangs when I call the method_1 in PRG_1 from a method in PRG_2? Both programs run in the same task. No chance that any other program calls the method. What I practically do there is that in the program PRG_2 I add a structed object into a buffer. In PRG_1 I just process the items in the buffer.
Last updated: 2024-06-03
Post by mozed on Signature verification faited fro the following package
CODESYS Forge
talk
(Post)
Good morning, I'm trying to open a project but codesys tells me that there are certain packages that I don't have and that I need to download them. Once the installation of the packages begins, it shows me a error that the signature of certain packages does not correspond to that coming from the accepted installation context. Do you have a solution to my problem please, it is very urgent in my work. Sincerely
Last updated: 2024-06-11
Post by youness on CSVReaderInit returns error : INVALID_HANDLE
CODESYS Forge
talk
(Post)
I have Already the same problem when i'm trying to write data more than 10 times in the same file. In fact, i send my data periodicaly to a file that i configured to have permission of W/R in my CodesysContol.cfg. When the Error occurs, i must reboot my machine to success. It means that the problem isn't realted to a limitation of size, but a problem in the function supposed to handle the file. totorovic : allow me to know if you've found a solution to your problem. Thanks.
Last updated: 2025-11-26
Post by durallymax on VAR_INFO from inside of a FB to get info on the instance.
CODESYS Forge
talk
(Post)
The help link appears to be broken. When I implemented something similar I had to add {attribute 'reflection} above the declaration of the FB with {attribute 'instance-path'} above the string VAR that would contain the path. Then wrote a function to trim off however much I wanted removed by searching for periods, then formatting it with spaces at the periods and removing brackets on arrays while also breaking up the PascalCase to present it a bit nicer for the end-users.
Last updated: 2025-12-12
Post by timvh on History of Alarms
CODESYS Forge
talk
(Post)
It is most likely related to the existing alarm log files in the Control Win. Depending on how you start up the Control Win, you can find the files in: C:\Users\<user name="">\AppData\Roaming\CODESYS\CODESYSControlWinV3x64\<unique id="">\PlcLogic\alarms\ Or C:\Windows\System32\config\systemprofile\AppData\Roaming\CODESYS\CODESYSControlWinV3x64\<unique id="">\PlcLogic\alarms\</unique></unique></user> Delete the files in this folder, download your project again and start the application. PS, if you have an older version of CODESYS, the files are in: C:\ProgramData\CODESYS\CODESYSControlWinV3x64\<unique id="">\PlcLogic\alarms</unique>
Last updated: 2026-01-07
Post by scrollman on Attribute FB for comment
CODESYS Forge
talk
(Post)
Masters, I need your help. I can explain in different way. I can get the name and comment of parameter if i use "VARINFO", but right now I want to get name and comment of FB from inside one. I can get the name to use the "{attribute 'reflection'}" but I don't understand how to get comment? Do you have any idea how to do it? Thanks
Last updated: 2026-01-08
Post by pernockham on How to recognize licenses SMALL, MEDIUM, LARGE by CmpCodemeter
CODESYS Forge
talk
(Post)
Solved finally, in short by: listening to eventId = EVT_CmpMgr_LicenseState, make a callback, extract the event-parameter which contains the RUNTIME_LICENSE_STATE. This gives me the license state as LICENSED / LICENSED_LOS / DEMOMODE etc. What Im not certain of at this point is this the aggregation of all three licenses or just the RUNTIME? Ie, what if my CONTROL-license is ok but my Visu-license is to low, will that set LICENSE_LOST, or would I need other listeners to find out if my VISU will shut down?
Last updated: 2026-10-07
Post by dmb-fan on From target start Win OnScreenKeyboard
CODESYS Forge
talk
(Post)
Hi ! I am get crazy.... I try to start osk.exe from Visu or PLC. From Visu I can't load it, always error (It change from programm execute always to load receipe ..!?!?) From PLC always freeze of PLC, - I allowed the win service of the PLC the data exchange between desktop and service - I allowed in ..user.cfg [SysProcess] Command=AllowAll Shutdown with SysProcessExecuteCommand works, but 'osk.exe' or the complete path always crashed the system. And like always: No documentation. Just guessing. Or know somebody more and have a link for me? THANKS !
Last updated: 2026-10-27
Post by bertus on Can't get SMC_SmoothPath to work
CODESYS Forge
talk
(Post)
Hello all, I am trying to run a XY trajectory from a static G-Code file. Everything works except the smoothing/blending of the corners. My setup: Codesys v3.5sp18 Raspberry Pi 4 CODESYS Control for Raspberry Pi SL, using demo license. Zero axes (only using the interpolator). The order of processing for my decoding is: SMC_NCDecoder (ok) SMC_SmoothMerge (ok) SMC_SmoothPath (not ok) SMC_LimitDynamics SMC_CheckVelocities I created following instances and buffers: fbNCDecoder: SMC_NCDecoder; fbSmoothMerge: SMC_SmoothMerge; fbSmoothPath: SMC_SmoothPath; fbLimitDynamics: SMC_LimitDynamics; fbCheckVelocities: SMC_CheckVelocities; aNCDecoderBuffer: ARRAY[0..49] OF SMC_GeoInfo; // buffer stage 1 (fbNCDecoder) aSmoothMergeBuffer: ARRAY[0..19] OF SMC_GeoInfo; // buffer stage 2 (fbSmoothMerge) aSmoothPathBuffer: ARRAY[0..99] OF SMC_GeoInfo; // buffer stage 3 (fbSmoothPath) aLimitDynamicsBuffer: ARRAY[0..39] OF SMC_GeoInfo; // buffer stage 4 (fbLimitDynamics) My original G-Code file has a lot of short G1 elements but this example, I reduced it to a simple square: N000 G51 D10 N010 G38 O1 N020 G00 X0 Y0 F50 E1000 E-1000 N030 G01 X0 Y-37.5 N040 G01 X-75 Y-37.5 N050 G01 X-75 Y37.5 N060 G01 X0 Y37.5 N070 G01 X0 Y0 N080 G50 N090 G39 O1 In the Codesys CNC settings, I have these instances activated: SMC_SmoothMerge SMC_SmoothPath SMC_LimitDynamics SMC_CheckVelocities And with those settings (and the path-preprocessing button actived), the G-Code viewer shows the square with nicely blended corners (see attached picture). However, when running it on the PLC, it doesn't blend the corners at all. Below the relevant part of my code. The process is started with bDecode. // stage 1: decoding G-code fbNCDecoder( ncprog := square, bExecute:= bDecode, bAbort:= NOT bDecode, nSizeOutQueue := SIZEOF(aNCDecoderBuffer), pbyBufferOutQueue := ADR(aNCDecoderBuffer) ); // stage 2: merge short linear segments fbSmoothMerge( bExecute := bDecode, poqDataIn := fbNCDecoder.poqDataOut, nSizeOutQueue := SIZEOF(aSmoothMergeBuffer), pbyBufferOutQueue := ADR(aSmoothMergeBuffer), piMaxDifference := PI_MAX_DIFFERENCE, usiMaxDegree := 5, wFeatureFlag := 1, wAdditionalParamNumber := 0, dMinimumCurvatureRadius := D_MIN_CURVATURE_RADIUS ); // stage 3: smooth corners fbSmoothPath( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbSmoothMerge.poqDataOut, eMode := SMC_SMOOTHPATHMODE.SP_SPLINE5_MIN_CURVATURE, eAddAxMode := SMC_SMOOTHPATHADDAXMODE.SPAA_NONE, nSizeOutQueue := SIZEOF(aSmoothPathBuffer), pbyBufferOutQueue := ADR(aSmoothPathBuffer), dAngleTol := D_ANGLE_TOL, bSymmetricalDistances := TRUE, bImprovedSymmetricCuts := TRUE ); // stage 4: keep acc/dec and velocity within limits fbLimitDynamics( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbSmoothPath.poqDataOut, wAxis := 16#07, nSizeOutQueue := SIZEOF(aLimitDynamicsBuffer), pbyBufferOutQueue := ADR(aLimitDynamicsBuffer), bIncludePathSettings := TRUE, dMaxVel := 2500, dMaxAccDec := 10000 ); // stage 5: check the path speed fbCheckVelocities( bExecute := bDecode, bAbort := NOT bDecode, poqDataIn := fbLimitDynamics.poqDataOut, dAngleTol := D_ANGLE_TOL); pathQueue := fbCheckVelocities.poqDataOut; // repeat until MaxDuration ... Any idea what I'm doing wrong? Is smooth path supposed to work at all when using a demo license? Thanks.
Last updated: 2025-12-17
Post by tobiassantos on History of Alarms
CODESYS Forge
talk
(Post)
I am running tests using the Windows runtime environment. The alarm history is not being logged and displays the error: "Some kind of disk I/O error occurred. Check disk space" in the alarm table. Furthermore, it is not possible to export the alarms. I have already tried to find a configuration field in Alarm storage and Alarm configuration to fix this problem, but I haven't found any related fields.
Last updated: 2026-01-05
Post by tobiassantos on History of Alarms
CODESYS Forge
talk
(Post)
I am running tests using the Windows runtime environment. The alarm history is not being logged and displays the error: "Some kind of disk I/O error occurred. Check disk space" in the alarm table. Furthermore, it is not possible to export the alarms. I have already tried to find a configuration field in Alarm storage and Alarm configuration to fix this problem, but I haven't found any related fields.
Last updated: 2026-01-05
Post by gseidel on Mismatch between coordinate monitor and actual motion using SMC_GroupJog2, MC_MoveLinearAbsolute (6DOF)
CODESYS Forge
talk
(Post)
Dear darwin03, my first guess is that the axis scaling of the last axis (joint 6) is not correct. It should be confiugured so that one technical unit equals one angular degree. From the video, it rather looks like 1 technical unit is a full revolution of the joint. (This holds for all rotary axes used with SoftMotion Robotics: they must be scaled so that one technical unit equals one angular degree.) Best regards, Georg
Last updated: 2026-04-07
Post by gseidel on Problem with keeping up the distance between two axes
CODESYS Forge
talk
(Post)
Hi alex-n, are there any errors before the crash happens: MC_Phasing.Error, MC_Phasing.CommandAborted, what does the PLC log show before the crash? Does one of the drives show an error? You can achieve the same effect as MC_Phasing by using MC_GearIn and MC_MoveSuperImposed. But probably there is some problem in your application independent of MC_Phasing that can lead to the crash. Best regards, Georg
Last updated: 2026-06-10
Post by dhumphries on codesys installer deletes itself instead of updating
CODESYS Forge
talk
(Post)
I'm using the 64 bit version of the engineering software, but the codesys installer seems to be 32 bit. im trying to use the installer to manage my installations but when I open it with admin privelages it starts an automatic update immediately then deletes itself. I don't know how else to explain this. This isn't a repository problem, or a problem with the engineering software, it is a problem with the installer.
Last updated: 2026-08-11
Post by dmb-fan on From target start Win OnScreenKeyboard
CODESYS Forge
talk
(Post)
Hi ! I am get crazy.... I try to start osk.exe from Visu or PLC. From Visu I can't load it, always error (It change from programm execute always to load receipe ..!?!?) From PLC always freeze of PLC, - I allowed the win service of the PLC the data exchange between desktop and service - I allowed in ..user.cfg [SysProcess] Command=AllowAll Shutdown with SysProcessExecuteCommand works, but 'osk.exe' or the complete path always crashed the system. And like always: No documentation. Just guessing. Or know somebody more and have a link for me? THANKS !
Last updated: 2026-10-27
Post by mubeta on Some 'pathetic' errors in SoftMotion program
CODESYS Forge
talk
(Post)
Hello everyone, I have a very simple program for the process, but it's driving me crazy and I can't see the problems I'm left with: Short topological description: Dual Core Berghof controller with softmotion runtime version 3.5.19.30; Two axes with servodrive on canopen bus, clocked distributed from master; Ethercat I/O node; 2 ms ethercat task, 2 ms canopen bus cycle time; I/O objects of the canopen master and canopen drives connected to the ethercat task cycle; Problem 1: Two separate programs each manage their own axis and drive, with separate state machines. A first axis moves primarily in velocity, except having to position itself absolutely at a predetermined point at the end of the job; the second axis, on the other hand, is a paper unwinder that changes, for each job cycle, from actions in absolute, relative, and cam displacement with the master axis. Well, the state machine of both axes was written in such a way as to call running the useful FB and change it on state change in this way: CASE i_stateMachine OF 0: o_Power(Enable := TRUE, bRegulatorOn := FALSE, bDriveStart := FALSE, Axis := o_PaperUnwinderAxis); o_MoveAbs(Execute := FALSE, Axis := o_PaperUnwinderAxis); o_MoveRel(Execute := FALSE, Axis := o_PaperUnwinderAxis); o_CamSelect(Execute := FALSE, Master := o_MachineAxis, Slave := o_PaperUnwinderAxis, CamTable := cam_PaperUnwinder); o_CamIn(Execute := FALSE, Master := MachineEncoder, Slave := o_PaperUnwinderAxis); o_CamOut(Execute := FALSE, Slave := o_PaperUnwinderAxis); o_SetPosition(Execute := FALSE, Axis := o_PaperUnwinderAxis); IF ... THEN i_StateMachine := 10; END_IF; 10: o_Power( Enable := TRUE, bRegulatorOn := TRUE, bDriveStart := TRUE, Axis := o_PaperUnwinderAxis ); IF o_Power.Status THEN i_StateMachine := 20; END_IF; 20: (* Avanzamento carta *) o_MoveAbs( Execute := TRUE, Position := o_Somewhere, Velocity := 25.0, Acceleration := 3666.7, Deceleration := 3666.7, Jerk := 48000.0, Direction := MC_DIRECTION.positive, Axis := o_PaperUnwinderAxis ); IF o_MoveAbs.Done THEN o_MoveAbs(Execute := FALSE, Axis := o_PaperUnwinderAxis); i_StateMachine := 30; END_IF 30: d_HomingPosition := ...; o_SetPosition( Execute := TRUE, Position := d_HomingPosition, Mode := FALSE, Axis := o_PaperUnwinderAxis ); (* ... *) IF o_SetPosition.Done = TRUE THEN o_SetPosition(Execute := FALSE, Axis := o_PaperUnwinderAxis ); o_LogServer.Append(sMessage := '...', lscClass := LOGSERVER_CLASS.ALWAYS, sdt := o_CommonsMgrData.systime.sdtLocal); i_StateMachine := 40; END_IF; 50: ... The code above is a sketchy example of what I wanted to write. But it gives me a spot problem: in some, the state change results in a drive error, which is unrecoverable except with a reinitialization via SM3_ReinitDrive(). Things are improved a little if in the program I always run the call of all softmotion blocks in this way: o_Power(Axis := o_PaperUnwinderAxis); o_Jog(Axis := o_PaperUnwinderAxis); o_Halt(Axis := o_PaperUnwinderAxis); o_MoveAbs(Axis := o_PaperUnwinderAxis); o_MoveRel(Axis := o_PaperUnwinderAxis); o_CamIn(Master := MachineEncoder, Slave := o_PaperUnwinderAxis); o_CamOut(Slave := o_PaperUnwinderAxis); If I don't execute all the calls of all the motion FBs used, when exchanging machine state often (but not always), the axis goes into error with event id THE_FB_WASNT_CALL... Done a little diagnostics it seems that the FBs return the bDone, before they are completely terminated. I tried doing the machine state exchange not with the bDone bit of the FBs, but with the 'standstill' state of the axis. It didn't seem to change anything. Problem 2: During the use SM3_ReinitDrive() I get the erro in the log: "NetID 0: SDO read error for object 16#607C..." Assuming that the device involved it's one of the two servodrive, (no others device are present in the network), I don't found any object 0x607C in the 'possible object list in/out' of the two drive, and I don't understand where this object can be listed. So any ideas and suggestions regarding these two issues will be very, very welcome. If you need the source project, I am willing to send it.
Last updated: 2024-07-17
Post by brandonje on [Error] IoDrvEtherNetIP Library with Weintek
CODESYS Forge
talk
(Post)
I'm using weintek and Codesys V3.5 SP22 when I try to charge an ethernetIP device show me this error: ------ Build started: Application: Device.Application ------- Typify code... [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0077: Unknown type: '(_pPhysicalLink^._xLinkState <> CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up)' [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0077: Unknown type: 'CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up' [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0062: 'CmpSysEthernet.OperStatus' is no structured variable [ERROR] cip object, 4.9.0.0 (codesys): TCPIP_Interface: C0063: 'CMPSYSETHERNET, 3.4.3.0 (3S - SMART SOFTWARE SOLUTIONS GMBH)' contains no definition for 'OperStatus' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ADR(ethFrame.ethData)'' to type 'POINTER TO StructEthernetframe' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ethFrame.udFrameLen'' to type 'ANY' [ERROR] cip object, 4.9.0.0 (codesys): SendEthFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '((driverInstance * 2) + 1)'' to type 'ANY' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0077: Unknown type: '(driverInstance * 2)' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0077: Unknown type: 'driverInstance' [ERROR] cip object, 4.9.0.0 (codesys): _OpenEthAdapter [TCPIP_Interface]: C0046: Identifier 'driverInstance' not defined [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SIZEOF(ethFrame.ethData)' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0018: 'ethFrame.udFrameLen' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: 'ADR(ethFrame.ethData)'' to type 'POINTER TO BYTE' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'ethFrame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [TCPIP_Interface]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'ethFrame' [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier 'ethClose' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: 'ethClose' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_diAdapterNumber' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_stName' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_stName' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0046: Identifier '_stDescription' not defined [ERROR] cip object, 4.9.0.0 (codesys): _CloseEthAdapter [TCPIP_Interface]: C0018: '_stDescription' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0231: Expression of type 'BOOL' expected in this place [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0077: Unknown type: '(_pPhysicalLink^._xLinkState = CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up)' [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0077: Unknown type: 'CmpSysEthernet.OperStatus.SYSETH_OPERSTAT_Up' [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0062: 'CmpSysEthernet.OperStatus' is no structured variable [ERROR] cip object, 4.9.0.0 (codesys): AddressConflictDetection [TCPIP_Interface]: C0063: 'CMPSYSETHERNET, 3.4.3.0 (3S - SMART SOFTWARE SOLUTIONS GMBH)' contains no definition for 'OperStatus' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0046: Identifier '_diAdapterNumber' not defined [ERROR] cip object, 4.9.0.0 (codesys): Recv [TCPIP_Interface]: C0032: Cannot convert type 'Unknown type: '_diAdapterNumber'' to type 'DINT' [ERROR] memory block manager, 3.5.21.30 (codesys): ObjectRetain [Disposable]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] memory block manager, 3.5.21.30 (codesys): ObjectRelease [Disposable]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'frame' [ERROR] cip object, 4.9.0.0 (codesys): SendFrame [LLDP_Management]: C0201: Type 'SysEthernetFrame' is not equal to type 'SysEthernetFrame' of VAR_IN_OUT respectively REFERENCE 'ethFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0032: Cannot convert type 'Unknown type: 'ADR(frame.ethData[0])'' to type 'POINTER TO BYTE' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'frame.ethData[0]' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0032: Cannot convert type 'Unknown type: 'SIZEOF(frame.ethData)'' to type 'UDINT' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'frame.ethData' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0018: 'frame.udFrameLen' is no valid assignment target [ERROR] cip object, 4.9.0.0 (codesys): CreateFrame [LLDP_Management]: C0077: Unknown type: 'SysEthernetFrame' [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Receive [UcmmReceiver]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Send [UcmmReceiver]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Enqueue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] iodrvethernetip, 4.9.0.0 (codesys): Dequeue [UcmmQueue]: C0448: Operator '__XADD' is not supported by your current target. At least runtime system version 3.5.14.0 is required. [ERROR] asynchronous job manager, 5.0.0.0 (codesys): ExtendAsync [FactoryBase]: C0448: Operator '__COMPARE_AND_SWAP' is not supported by your current target. At least runtime system version 3.5.14.0 is required. Compile complete -- 71 errors, 0 warnings Build complete -- 71 errors, 0 warnings : No download possible
Last updated: 2026-08-20
To search for an exact phrase, put it in quotes. Example: "getting started docs"
To exclude a word or phrase, put a dash in front of it. Example: docs -help
To search on specific fields, use these field names instead of a general text search. You can group with AND or OR.