IOT2000 GPIO Demo

Example to show and control the GPIOs of an IOT2000 SL runtime.

Brought to you by: celberone, dholzer, erichspitzweg, fmueller, and 15 others

Unlicense

Home

Authors: erichspitzweg

Download file

IOT2000 GPIO Demo

IOT2000 GPIO Demo

This example project shows how to use the GPIOs with CODESYS on a IOT2000 with GPIO expansion/IO module.

Product description

The small webvisu shows the status of the inputs as lamps, the outputs can be controlled via switches.

More information

Preparations

Install / mount the IOT2000 IO-expansion module according to its user manual on your IOT2000 hardware.
Install and run the CODESYS Control for IOT2000 SL on your IOT2000 hardware.

Procedure

Start CODESYS and open the example project.
Download and run it. In the online or webvisualization you can see and control the inputs and outputs.

System requirements and restrictions

System requirements and restrictions	Info
Programming System	CODESYS Development System Version 3.5.17.0 or higher
Runtime System	CODESYS Control IOT2000 SL Version 4.1.0.0
Required Accessories	IOT2000 GPIO expansion module

Small webvisu to show and control the GPIOs