I'm using a BL20-PN-EN-DN-JA for a project in CoDeSys v2.3 that requires accurate timestamps for quality traceability. The PLC is connected to a PC, and the PC uses the Visualization tab displayed on its monitor as an HMI for the operator to control the procss (not ideal, but i did not design this syste... i'm simply trying to improve it per updated project requirements). The old system relies on the operator + SysLibRtc.lib to produce timestamps: Operator pushes a button tied to SysRTCGetTime()...
I'm using a BL20-PN-EN-DN-JA for a project in CoDeSys v2.3 that requires accurate timestamps for quality traceability. The PLC is connected to a PC, and the PC uses the Visualization tab displayed on its monitor as an HMI for the operator to control the procss (not ideal, but i did not design this syste... i'm simply trying to improve it per updated project requirements). The old system relies on the operator + SysLibRtc.lib to produce timestamps: Operator pushes a button tied to SysRTCGetTime()...
I'm using a BL20-PN-EN-DN-JA for a project in CoDeSys v2.3 that requires accurate timestamps for quality traceability. The PLC is connected to a PC, and the PC uses the Visualization tab displayed on its monitor as an HMI for the operator to control the procss (not ideal, but i did not design this syste... i'm simply trying to improve it per updated project requirements). The old system relies on the operator + SysLibRtc.lib to produce timestamps: Operator pushes a button tied to SysRTCGetTime()...
I'm using a BL20-PN-EN-DN-JA for a project in CoDeSys v2.3 that requires accurate timestamps for quality traceability. The PLC is connected to a PC, and the PC uses the Visualization tab displayed on its monitor as an HMI for the operator to control the procss (not ideal, but i did not design this syste... i'm simply trying to improve it per updated project requirements). The old system relies on the operator + SysLibRtc.lib to produce timestamps: 1) Operator pushes a button tied to SysRTCGetTime()...
I'm using a BL20-PN-EN-DN-JA for a project in CoDeSys v2.3 that requires accurate timestamps for quality traceability. The PLC is connected to a PC, and the PC uses the Visualization tab displayed on its monitor as an HMI for the operator to control the procss (not ideal, but i did not design this syste... i'm simply trying to improve it per updated project requirements). The old system relies on the operator + SysLibRtc.lib to produce timestamps: 1) Operator pushes a button tied to SysRTCGetTime()...