Activity for edepalos
-
edepalos posted a comment on discussion Visualization 🇬🇧
Hi guys, I have a textlist in my project which is working just as expected in a drop down list. I would like to move this text list to a sd card and access it from there, because I want to ease the editing of the contents of this textlist. I'm imagining a solution like the operator shuts down the plant, takes the sd card out, edits the textlist on the card with a windows machines notepad, then reinserts the card in the PLC and restarts the plant, having the new content of the textlist populating...
-
If it's Tohid Alizadeh's solution than I found that already, that is what I wanted to share with you. If You have any other then I'm open for it!
-
Managed to solve?
-
Managed to solve?
-
Managed to solve?
-
Where do I find the error table for these messages? I have no trend recording in my program.
-
Unfortunatelly I had it working too on a different hardware and it was running smooth. Even on this hardware if I load an empty project containing just this part of the program it works without issues... I was hoping that someone had similar problems, maybe some untested conflicts in the runtime... I could send You the complete project if you'd like...
-
Hi Ben! the problem is that the source of my textfeld was T#5s3000ms...
-
Hi Ben! the problem is that the source of my textfeld was T#5s3000ms...
-
I do reccomend for you to use WebVisu, because you can visualize your demo on a cheap android head unit so you won't be needing to build hardware...
-
in the description you have: "CODESYS HMI SL is a software package that is installed on a remote computer to equip it with a graphical user interface (HMI)" and "Executable under Windows 8 / 10 / Embedded (32 / 64 Bit)" So unless You have Win10 embeded on the Pi, You can not have the CodesysHMI running on it.
-
Dear All, Please help me out, cause I'm going crazy... - Codesys 3.5.9.73 - ifm AC402S plc I have the %t[HH:mm] HMI text displaying strange things, either the current time (that I understand) or some strange and static value like 16:15 whatever the result of the source DWORD_TO_TIME function is... Where do I go wrong??? Thank You All! Best regards, Ede
-
Dear All, Please help me out, cause I'm going crazy... - Codesys 3.5.9.73 - ifm AC402S plc I have the %t[HH:mm] HMI text displaying strange things, either the current time (that I understand) or some strange and static value like 16:15 whatever the result of the source DWORD_TO_TIME function is... Where do I go wrong??? Thank You All! Best regards, Ede
-
Dear All, Please help me out, cause I'm going crazy... - Codesys 3.5.9.73 - ifm AC402S plc I have the %t[HH:mm] function displaying strange things, either the current time (that I understand) or some strange and static value like 16:15 whatever the result of the source DWORD_TO_TIME function is... Where do I go wrong??? Thank You All! Best regards, Ede
-
Hello to everyone! Please help me out guys! I have an ifm AC402s and a third party modbusTCP or EthernetIP (It has both protocols running) slave device. When trying to communicate on: - ModbusTCP I get the GREEN circle in the device tree, but sometimes it goes orange for a split sec. and I have no data communication anyways; This has been solved as the following: The offset of the register should contain only the thousands, that means the 4 from the beginning of the register address should be lost....
-
Hello to everyone! Please help me out guys! I have an ifm AC402s and a third party modbusTCP or EthernetIP (It has both protocols running) slave device. When trying to communicate on: - ModbusTCP I get the GREEN circle in the device tree, but sometimes it goes orange for a split sec. and I have no data communication anyways; - EthernetIP I get the GEEN circle/RED triangle flashing and I have no data communication anyways (Bus not running); Otherwise: - ifm made EthernetIP and ModbusTCP devices are...
-
Hello to everyone! Please help me out guys! I have an ifm AC402s and a third party modbusTCP or EthernetIP (It has both protocols running) slave device. When trying to communicate on: - ModbusTCP I get the GREEN circle in the device tree, but sometimes it goes orange for a split sec. and I have no data communication anyways; - EthernetIP I get the GEEN circle/RED triangle flashing and I have no data communication anyways (Bus not running); Otherwise: - ifm made EthernetIP and ModbusTCP devices are...