Hello all, I have used to Codesys Softmotion V3.5.16 and Visual Studio Version 19. When I worked to in my PC with Codesys SoftMotion Win64, I can communicate the my interface which designed by Visual Studio V19 and doing data exchange succesfully . But, when I worked to in IPC which in running Codesys SoftMotion Run Time, I can not communicate each other and does not exchanging data. I can not know how I will solve this problem. May someone who encounter this problem help me ?
Hi, My G Codes first lines are : () N1 G90 N2 G98 N3 G75 N4 G38 O1 N5 G51 D0.2 () Are these codes suitable by the book ? There is a G75 in N3. Should I insert second G75 N21 and N22 ?
Hello everyone, I use codesys runtime and I do CNC application with soft motion. My G Code is : (**) N9 G0 X-2474.3860 Y1918.6109 N10 G0 Z50.0 N11 G0 A100 F50 N11 G0 X-2474.3860 Y1918.6109 N12 G1 X-2474.3860 Y1918.6109 Z-5.0 F58 N13 G1 X-2469.2687 Y1920.6741 Z-5.0 F166 N14 G1 X-2464.1221 Y1922.6632 Z-5.0 F166 N15 G1 X-2458.9473 Y1924.5777 Z-5.0 F166 N16 G1 X-2453.7454 Y1926.4173 Z-5.0 F166 N17 G1 X-2448.5174 Y1928.1816 Z-5.0 F166 N18 G1 X-2443.2646 Y1929.8702 Z-5.0 F166 N19 G1 X-2437.9879 Y1931.4827...
Hello all, I use Codesys Softmotion RTE V3 x64 for CNC machine. When I use the G75 and Position Tracker on CNC3DEditor system, tracker has crashed but When I dont use the G75, position tracker has worked fine. How can I solve this problem or How can I change G code which send to position tracker ? Thanks all.
Hello all, I use Codesys Softmotion RTE V3 x64 for CNC machine. I hava problem about G Code transition. When the path transition between G1 and G2, the path does not write radius, it write linear path. Has anyone encountered this before ? I add path must be red line and non is blue line. Thanks.
Hello, I want to use some variable in my G Code. For example, I suppose that, G code has T1000 code and this T1000 means speed of spindle. When controller read this T1000 line, How can I use this 1000 value my program ? I am waiting your help. Thank you so much.
Hi everyone, I use CODESYS Softmotion RTE V3 x64 and KEBA Drive with absolute encoder. Firstly, I do homing and axis position is 0 degree. When I power off and again power on the system, I read axis position 75824.75 degree. How can I solve this problem ? I attach my axis settings. Thank you.