I tried to change the name of the tap device to 'tap0,' but nothing changed. I don't think this is the problem.
Hi eschwellinger, I changed the name to tap2 due to network issues with Debian (I don't know why it changes the tap0 IP every time the program restarts). Anyway, I think the tap name doesn't affect the connection.
Hi eschwellinger, I changed the name to tap2 due to network issues with Debian (I don't know why it changes the tap0 IP every time the program restarts). Anyway, I think the tap name doesn't affect the connection.
Hi eschwellinger, I changed the name to tap2 due to network issues with Debian (I don't know why it changes the tap0 IP every time the program restarts). Anyway, I think the tap name doesn't affect the connection.
Hello, I've been trying to use EoE for communication between a Windows PC and an M753 drive from Control Technique. Despite following some online guides (https://content.helpme-codesys.com/en/libs/EtherCATStack/4.3.0.0/Ethernet_over_EtherCAT/fld-Ethernet_over_EtherCAT.html) I haven’t had any success. Both are connected to a Debian device where RTE is running: The PC is connected via the Ethernet port. The drive is connected via the EtherCAT port. I'm unable to ping the drive from my Windows PC. Here...
Hello, I've been trying to use EoE for communication between a Windows PC and an M753 drive from Drive Control Technique. Despite following some online guides, I haven’t had any success. Both are connected to a Debian device where RTE is running: The PC is connected via the Ethernet port. The drive is connected via the EtherCAT port. I'm unable to ping the drive from my Windows PC. Here is my configuration: On Debian: (See attachments 1, 2, 3) enp1s0 = Ethernet port enp2s0 = EtherCAT port tap2 =...