Activity for jinlee
-
jinlee modified a comment on discussion Visualization 🇬🇧
Hi, I followed your guidance and used go2rtc. There is a link generated from go2rtc I can copy into the web browser element in the visualisation. It somehow only appear within the software when it is running, but not on the webvisu. I want to display the camera feed onto the webvisu. My camera is reolink 810a which supports IP protocol. My project is pretty simple, just a web browser element with assigned URL.
-
Hi, I followed your guidance and used go2rtc. There is a link generated from go2rtc I can copy into the web browser element in the visualisation. It somehow only appear within the software when it is running, but not on the webvisu. I want to display the camera feed onto the webvisu. My camera is reolink8100a which supports IP protocol. My project is pretty simple, just a web browser element with assigned URL.
-
Hi guys, I have been trying to use web browser element in the visualisation to connect with my IP camera. From the past few weeks, I have not been successful of doing it. I thought it would be very easy to just connect to the ip address, but apparantly it is not. I am using WAGO PLC PFC200 and my PC as a webvisu. or else can you guys please advice me on which kind of camera should I use as a CCTV system in my project instead of IP Camera. Ideally, I want multiple web browser elements to browse my...
-
Hi guys, I have been trying to use web browser element in the visualisation to connect with my IP camera. From the past few weeks, I have not been successful of doing it. I thought it would be very easy to just connect to the ip address, but apparantly it is not. I am using WAGO PLC PFC200 and my PC as a webvisu. or else can you guys please advice me on which kind of camera should I use as a CCTV system in my project instead of IP Camera. Ideally, I want multiple web browser elements to browse my...
-
Hi guys, I have been trying to use web browser element in the visualisation to connect with my IP camera. From the past few weeks, I have not been successful of doing it. I thought it would be very easy to just connect to the ip address, but apparantly it is not. I am using WAGO PLC PFC200 and my PC as a webvisu. or else can you guys please advice me on which kind of camera should I use as a CCTV system in my project instead of IP Camera. Ideally, I want multiple web browser elements to browse my...
-
Hi, I can see the camera feed in the Codesys software, but not on the webvisu browser. Kind regards, Jin.
-
Hi guys, I am experiencing the issue that browser element can't show anything other than wbm of my PLC. I am using WAGO PFC200, trying to feed IP camera into web browser element. Can anyone helps me ? Kind regards, Jin
-
Hi, Thanks for the information. However, I can't download the associated project.
-
Hi everyone, Can someone share some projects or samples with me regarding implementing the camera as a CCTV in Codesys 3.5 visualisation ? Kind regards, Jin.
-
Hi guys, I am quite new Codesys. Be patient to me. I am having a problem now. Please refer to the attached photo. Is there a way to increase the memory ? If no, what is the way to solve this problem ? My retain variable list is in one place. Please refer to the attached photo. Thank you very much.
-
Hi, Did you manage to solve the problem ? I have the same issue of reading 127.0.0.1 only.
-
Hi, for this, G_LastClient := VU.PublicVariables.Clients.Current; It fails to do it.
-
Hi there, I wonder how to use this CURRENTCLIENTID. However, what I am trying to do is to use PLC_PRG.aIndexVisu[CURRENTCLIENTID]. to switch the frame within the mainpage without affecting the other screen same as the first question of this post. However, I failed to do it. Can you tell me how to do it ? Or can you advise me on this issue
-
Hi there, I wonder how to use this CURRENTCLIENTID because I followed what you said and the library didnt come up. However, what I am trying to do is to use PLC_PRG.aIndexVisu[CURRENTCLIENTID]. to switch the frame within the mainpage without affecting the other screen same as the first question of this post. However, I failed to do it. Can you tell me how to do it ? Or can you advise me on this issue
-
Hi, thank you for replying. Basically, I have a main visu with frame selection. So, under some condition the frame will switch to a specific frame. It used to be controlled by variable using "Switch frame variable". However, I realise it will change all the HMI screen at one time. So I removed the variable, and still looking for a solution to do that. Do you have any idea?
-
Hi there, I am having a similar problem like you. I have 3 screens connected to one PLC. I have set 3 different URLs for them. But 3 of them are still dependent to each other. How can I make them independently ? Kind regards, Jin.
-
Hi guys, I am new to the Visualization. I am having a problem. I have multiple web-panel to use webvisu. I have my software dowwloaded into the one PFC200. There are 3 screens connected to it. I noticed that if I switch page/visualisation on one of the screens, the others will change as well. Three screens are with different URLs that I set in the software. Is there any method to make them independently ? Kind regards, Jin.
-
Hi there, I am having the same question as well. Did you manage to solve it ? Thanks
-
Hi there, I am having the same question as well. Did you manage to solve it ? Thanks
-
Hi guys, I am working on an old project which using Codesys v2.3 talks to Beijer's screen TA150 (IX-Developer 2.20). Codesys v2.3 is different with 3.5 and Ecockpit. I know how to import the symbols from PLC to HMI for Codesys 3.5 and Ecockpit. However, I do not know how to do it on Codesys v2.3. I know that I can make excel sheet to import and export from the HMI and add whatever I want based on PLC. However, is there any quicker way of doing this? So that I can directly import the symbols (tags)...
-
Hi there, I will give it a try. Thank you very much.
-
Hi guys, Recently, I am working at the Dynamic I/Os mapping feature in Ecockpit or Codesys v3.5. I have been trying the libraries. However, it looks like it will not work as I wanted. I want to build the PLC which can detect all the I/Os itself and from there, I can do something on these channels. For example, the current setup is one digital input card, one digital output card and one analogue input card. Then, I want to add one more card into the setup e.g. one more digital input. Then, wago screen...
-
Hi guys, Recently, I am working at the Dynamic I/Os mapping feature in Ecockpit or Codesys v3.5. I have been trying the libraries. However, it looks like it will not work as I wanted. I want to build the PLC which can detect all the I/Os itself and from there, I can do something on these channels. For example, the current setup is one digital input card, one digital output card and one analogue input card. Then, I want to add one more card into the setup e.g. one more digital input. Then on my wago...