lazze

Hi, I fixed the problem by deleting the administrator rights (tricky to do) and now I didn't need to do any additional "trusted" certificates. LZ

Hello, I have troubles getting connection to XSOFT Codesys OPC UA server via UaExpert software. I'm trying to connect Eaton PLC XC303 with modules 16DIOPD05 and 4DORNO to OPC UA server. I did the symbol configuration and enabled the build the PLC symbols to the UA server. From the device log directory I found the correct IP address that I passed to the new server in the UaExpert. Now it gives me error: "The server returned no certificate all certificate checks will be skipped." Any idea how to configure...

Delete

Hi, I have problem to access the PLC tags that were builded in the symbol configuration. I accessed the generated UPC UA server that the Codes Download package ys produced and then I accessed the server in Unified Automation UaExpert. The problem is that I should see the uploaded tags but instead I see only "symbolconfiguration_missconfigured" (picture: attachement). Any idea what causes this problem? Regards Lazze

Hi, I use Codesys OPC DA server but when I connect the server with OPC Client I can only see _CommState and _CommStateOK tags in CoDeSys.OPC.DA server. The problem is that I can't see other tags that should be linked to the server. I understood that after uploading the PLC symbol path from the Symbol Configuration -> build + ( login and start) and after then they should be within the Codesys OPC server? Any idea what might be cause of this? Is there maybe something with the symbol configuration setup?...

Hi, I'm using XSOFT CODESYS 3.5.15 and I got following problem that can be seen from the attachment. I downloaded also the same version 3.5.15.0 OPC Server DA. I tried to activate the server via Quick Client. Any idea what causes this problem? Regards Lazze