Hello everyone, I have a problem while I start Codesys runtime on Raspberry Pi board. the Runtime shutdown with "ooops... this runtime was built for RASPBERRYPI (-1, 0x00000BB8, 0xFFFFFFFB)" I looked for the same issue with mine but I couldn't find it. Could you help me to solve this issue? System Info Raspberry PI 4 model B Rev 1.4 Raspberry PI SL 4.2.0.0 Raspberry Pi OS (Bullseye)
Hi, all. I wonder whether it is possible to use retain Vars on SL product(except embedded board), if I install extra NVRAM(PCI card type).
Simple recipe manager example using RecipeManCommands(F/B)
Hello, everyone I would like to ask you about Redundancy Sync problem. I am using two Raspberry pi SL and I set redundancy configuration and it wrote in 'CODESYSControl_User.cfg'. Also, I checked that a boot application was created and it synced without any problems. However, when I turn off the power of both RPis and turn them on at the same time. The redundancy state remained [Standalone - Standalone] as shown in the attached file. How could I make them sync automatically? when I turn them on at...
Hello, everyone When I try to install device description(.xml) to CODESYS IDE, the below mesg shows up. "Unable to import device description file The type {GUID} Could not be found" I've been through couple of missing plug-in problems on SP 17 or higher. It seems that this issue also caused by same problems Could you help me to solve this?
Hi everyone, I tried to write values on Automation Server. However, It seemed that Server wrote a value periodically even though I would like to write it only once. Is there any way to write a value only once not periodically? thanks in advance.
Problem solved. I found "VisuTrendStorageAccess" Lib
Hello all, I would love to change the trend time data to DT format or human readable format. I tried to convert it to DT or LDT but It didn't work. Can I get some help about this?
Hi, all I added Visu "Trace" element and recorded a variable. I expected that I was able to get a trace packet handle of the recording and control it via CmpTraceMgr. However, the handle have been returned even there is no trace object and I couldn't do anything with it. Is there anyone who knows how to use this library? BR
I wish you could find the right answer already. There are two types of triggers. The one is for starting a recording(=record condition) and the other is for finishing the recording(=trigger). It is totally different.
I want to know that in case of using EtherCAT
Hi, everyone. I have a question about 'Scan for devices' command for scanning connected I/O devices. How the Codesys Development system can distinguish each device? Does it read a device ID from the device? thanks in advance.
Hi, all I've tried to modify the 'alarm manager' example on CODESYS STORE. However, I can't understand what the code attached below means. When I deleted the code, the alarm manager system did not work at all. Anyone can help me to get it? Var arrAlarmsFromHistoryAll : ARRAY [0 .. iMaxCountAlarmsFromHistoryAll - 1] OF Alarm; arritfAlarmsFromHistoryAll : ARRAY [0 .. iMaxCountAlarmsFromHistoryAll - 1] OF IAlarm2; End_Var FOR i := 0 TO iMaxCountAlarmsFromHistory12 - 1 DO arritfAlarmsFromHistory12[i]...
Thanks for your help, I am trying to figure out how to use it. Can I ask you if the remote gateway is available for other CODESYS controllers(not SL product) as well?
Thanks for your advice. I would like to connect the IDE to PLCs via router with port forwarding . plz see attached picture for more details. I could connect the IDE to PLCs with the way you mentioned. However, I could not find any PLCs with Scan network command even I tried to connect via runtime UDP connection port(1740~1743) using port forwarding. In this case, Is it impossible to connect to the PLCs with Scan netwrok command?
Dear Edwin, At the thread that attached below, it is denoted that a remote gateway is embedded into RPI SL. If so, is the remote gateway installed on BBB SL as well? thread link : https://forge.codesys.com/forge/talk/Runtime/thread/4078a2ed28/ Thanks in advance.
Dear Edwin, At the thread that attached below, it is denoted that a remote gateway is embedded into RPI. If so, is the remote gateway installed on BBB as well? thread link : https://forge.codesys.com/forge/talk/Runtime/thread/4078a2ed28/ Thanks in advance.
Dear Edwin, At the thread that attached below, it is denoted that a remote gateway is embedded into RPI. If so, the remote gateway is installed on BBB as well? thread link : https://forge.codesys.com/forge/talk/Runtime/thread/4078a2ed28/ Thanks in advance.
Dear Edwin, At the thread that attached below, it is denoted that a remote gateway is embedded into RPI. If so, the remote gateway is installed on BBB as well? Thanks in advance.