Hi, I have the same problem... the CAN0 is working from the terminal, but not able to make it work in Codesys. I have the following error. No CAN Driver Found. and the bus is not running.... (see attached picture) what am I missing. thanks for your help...
Hi, I'm also having the same problem. not able to have the CANbus working. I tried to add the to edit and add these lines at the bottom as you suggested. /etc/CODESYSControl_User.cfg CmpSocketCanDrv] ScriptPath=/opt/codesys/scripts/ ScriptName=rts_set_baud.sh but still not working. I have a can Sensor installed on a Pican2 and I'm seeing the information/communication in Rpi terminal. so the CAN0 is properly working... what am I missing...? thanks for your help.
Found the issue... you can close this topic.
Hi, I'm having issue when installing the Control for raspberry pi 3.5.15.40 with these two IoDrvGPIO and SenseHat. An error has occurred while installing the package. see attached picture. The IoDrvGPIO livrary is not a zip file. I clicked, continu anyway. then when I build the code, there is an error : Failed to insert IoDrvGPIO Library. So I can't download the code to the Raspberry pi... what's is the issue...?
Hi, I'm having issue when installing the Control for raspberry pi 3.5.15.40 with these two IoDrvGPIO and SenseHat. An error has occurred while installing the package. see attached picture. The IoDrvGPIO livrary is not a zip file. I clicked, continu anyway. then when I build the code, there is an error : Failed to insert IoDrvGPIO Library. So I can't download the code to the Raspberry pi... what's is the issue...?
Hi, I'm having issue when installing the Control for raspberry pi 3.5.15.40 with these two IoDrvGPIO and SenseHat. An error has occurred while installing the package. see attached picture. The IoDrvGPIO livrary is not a zip file. I clicked, continu anyway. then when I build the code, there is an error : Failed to insert IoDrvGPIO Library.