So none of the images from the 64bit archive work with any Codesys Control versions? I have tried the last Pi OS with every Codesys Control version and they don't work. I was wondering if there's any stable combination of versions.
Thank you very much, it works perfectly fine. I was able to change the IP and I could verify it via Linux Terminal in my Raspberry. One last comment, I had to disable all the underlying devices of the Ethernet node for the code to work (in my case there were a Modbus TCP Master, Modbus TCP Slave and the Pi declared as TCP Slave Device. I'm leaving the final version attached in several pics.
Hi, I'm working with a Raspberry CM4 for a project. This Raspberry is going to act as a Modbus TCP slave and I want to edit the Ethernet adapter comm settings while the code is running, and also make these changes effective in the Raspberry network settings. I would like to know if it is possible to dynamically change the IP, subnetmask and gateway of the Ethernet adapter in a similar way as it is done in this faq thread for a Modbus TCP Slave: https://faq.codesys.com/display/CDSFAQ/Modbus+TCP+Slave%3A+Dynamic+Setting+of+the+IP+Address...