Hey, Thank you, it works !!! Best, Rariusz
Hello, I have a user login button on the Berghoff DC2000 controller. After pressing, a dialog box opens. The problem is the lack of a keyboard. The panel is touchscreen so I cannot enter my login and password. How to solve this problem?
Hello, I am using the CAN API library to read data in the CAN network. Sometimes after turning on the power I have an error like below. Is it possible to programmatically reset the error and start reading data from the CAN network? Currently, I am reset the error by means of a PLC powered off/on.
Hello, I am using the CAN API library to read data in the CAN network. Sometimes after turning on the power I have an error like below. Is it possible to programmatically reset the error and start reading data from the CAN network? Currently, I am reset the error by means of a PLC powered off/on. [-img src=CAN ERROR.png width=50%: missing =-]
Hello All, I have a device that cyclically sends CAN frames to the network. I want to receive this data using Codesys and a PLC controller and at this point there is a problem. As I do not have physical access (yet) to the device, I send data in the CAN network using the USB-CAN adapter. This is example frame 0x01,0x04, 0x01,0x02,0x03,0x04 (CAN ID, length of data and data). I want to read this data in Codesys. I currently have the following error: CANOPEN_WRONG_PARAMETER. In the case of the Beckhoff...
Hello All, I have a device that cyclically sends CAN frames to the network. I want to receive this data using Codesys and a PLC controller and at this point there is a problem. As I do not have physical access (yet) to the device, I send data in the CAN network using the USB-CAN adapter. This is example frame 0x01,0x04, 0x01,0x02,0x03,0x04 (CAN ID, length of data and data). I want to read this data in Codesys. I currently have the following error: CANOPEN_WRONG_PARAMETER. In the case of the Beckhoff...