Hi everyone, since I haven't received information from anyone, if it can be useful to someone else, after some tests I discovered that the system can only work using an IP-ROUTER (I used an "IP Router SCN-IP100.03" from MDT).
Can anyone answer me? Thank you
Hi all, I am using Codesys 3.5 SP18 with: - CODESYS Control for Raspberry Pi SL (license in USB KEY) - CODESYS KNX SL (license in USB KEY I have configured both Codesys and ETS but it is not communicating. On the KNX side I am using the "IP Interface SCN-IP000.03" (MDT) and I think this is the problem (in other topic Edwin recommend an IP ROUTER). So I should replace the interface with "IP Router SCN-IP100.03" (MDT). Do you think this could be the solution? In the windows KNX I/O Mapping the variable...
https://forge.codesys.com/forge/talk/Deutsch/thread/ecac9f80a7/#43f5 Hi Edwin, I am using Codesys 3.5 SP18 with: - CODESYS Control for Raspberry Pi SL - CODESYS KNX SL I have configured both Codesys and ETS but it is not communicating. On the KNX side I am using the "IP Interface SCN-IP000.03" (MDT) and I think this is the problem since you recommend an IP ROUTER. So I should replace the interface with "IP Router SCN-IP100.03" (MDT). Do you think this could be the problem and the solution? Thank...
Hi Edwin, I am using Codesys 3.5 SP18 with: - CODESYS Control for Raspberry Pi SL - CODESYS KNX SL I have configured both Codesys and ETS but it is not communicating. On the KNX side I am using the "IP Interface SCN-IP000.03" (MDT) and I think this is the problem since you recommend an IP ROUTER. So I should replace the interface with "IP Router SCN-IP100.03" (MDT). Do you think this could be the problem and the solution? Thank you