Activity for theo-aldescu
-
theo-aldescu posted a comment on discussion Runtime 🇬🇧
thanks for the help also! to be sure i understand, the problem is with the revision of the PI hardware? and we hope that in the next version of the codesys runtime the problems are solved?
-
sorry for the late reply, attached are result of the commands requested(Result_2), and also the result of ipconfig on the windows pc that i work on(win_host)
-
Follow up i think i called the command for single core but after calling sudo /opt/codesys/bin/codesyscontrol_armv7l_raspberry.bin -d i got the same result(correct response in .txt file attached)
-
here are the last few lines resulted the whole text result is in the attached file 2023-02-17T17:58:20.900Z: Cmp=CmpRouter, Class=1, Error=0, Info=1, pszInfo= Setting router <instance>2</instance> address to (2ddc:9ca0:140c) 2023-02-17T17:58:20.905Z: Cmp=CM, Class=1, Error=0, Info=34, pszInfo= CODESYS Control ready 2023-02-17T17:58:20.906Z: Cmp=CM, Class=2, Error=0, Info=0, pszInfo=!!!! no runtime license - running in demo mode(~2 hours) ooops... this runtime was built for RASPBERRYPI. Hardware version...
-
follow up i just realized, that while installing the runtime on the PI, it asks me to automatically install an edge gateway, i click ok, and it's the same story if i try to go online using the localhost gateway or the gateway with the PI ip address and the message when i try to go online is "no connection to the device. Please rescan your network." when i clicked system information i noticed this "2023-02-17T17:36:07Z, 0x0000001c, 4, 28, 0, **** ERROR: Invalid session ID. Still other sessions on...
-
Hello, Let me present my problem, and let's see if it's similar Just got a PI4B. used Raspberry PI imager, put on the latest OS(bullseye 32bit) Enabled SSH. From Codesys v3.5 SP18 installed the runtime on the PI(runtime V4.7), no problems so far, so i reboot the PI using the codesys reboot target command When i tried to go online with the PI, it says that the target can't be found and i need to rescan the network If i rescan, i can't find my PI If i send a stop command and then a start command to...