thanks for the help also! to be sure i understand, the problem is with the revision of the PI hardware? and we hope that in the next version of the codesys runtime the problems are solved?
sorry for the late reply, attached are result of the commands requested(Result_2), and also the result of ipconfig on the windows pc that i work on(win_host)
Follow up i think i called the command for single core but after calling sudo /opt/codesys/bin/codesyscontrol_armv7l_raspberry.bin -d i got the same result(correct response in .txt file attached)
here are the last few lines resulted the whole text result is in the attached file 2023-02-17T17:58:20.900Z: Cmp=CmpRouter, Class=1, Error=0, Info=1, pszInfo= Setting router <instance>2</instance> address to (2ddc:9ca0:140c) 2023-02-17T17:58:20.905Z: Cmp=CM, Class=1, Error=0, Info=34, pszInfo= CODESYS Control ready 2023-02-17T17:58:20.906Z: Cmp=CM, Class=2, Error=0, Info=0, pszInfo=!!!! no runtime license - running in demo mode(~2 hours) ooops... this runtime was built for RASPBERRYPI. Hardware version...
follow up i just realized, that while installing the runtime on the PI, it asks me to automatically install an edge gateway, i click ok, and it's the same story if i try to go online using the localhost gateway or the gateway with the PI ip address and the message when i try to go online is "no connection to the device. Please rescan your network." when i clicked system information i noticed this "2023-02-17T17:36:07Z, 0x0000001c, 4, 28, 0, **** ERROR: Invalid session ID. Still other sessions on...
Hello, Let me present my problem, and let's see if it's similar Just got a PI4B. used Raspberry PI imager, put on the latest OS(bullseye 32bit) Enabled SSH. From Codesys v3.5 SP18 installed the runtime on the PI(runtime V4.7), no problems so far, so i reboot the PI using the codesys reboot target command When i tried to go online with the PI, it says that the target can't be found and i need to rescan the network If i rescan, i can't find my PI If i send a stop command and then a start command to...