Hey there, I'm operating a SIEMENS CPU1516 as PROFINET controller with the CODESYS_Profinet_Device in TIA 15.1. The CODESYS_Profinet_Device is operating with the CODESYS Control Win V3. CoDeSys Version: 3.5 SP17 Patch 3 + (32-bit) The usb network adapter in use is a ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter. Adapter settings: IP / SN / GW: 192.168.100.10 / 255.255.255.0 / 192.168.100.10 After I select this adapter at the Ethernet Adapter in CDS3, CDS3 shows: IP / SN / GW: 192.168.100.10 /...
Hey there, I'm operating a SIEMENS CPU1516 as PROFINET controller with the CODESYS_Profinet_Device in TIA 15.1. The CODESYS_Profinet_Device is operating with the CODESYS Control Win V3. CoDeSys Version: 3.5 SP17 Patch 3 + (32-bit) The usb network adapter in use is a ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter. Adapter settings: IP / SN / GW: 192.168.100.10 / 255.255.255.0 / 192.168.100.10 After I select this adapter at the Ethernet Adapter in CDS3, CDS3 shows: IP / SN / GW: 192.168.100.10 /...
HeyHey there, I'm operating a SIEMENS CPU1516 as PROFINET controller with the CODESYS_Profinet_Device in TIA 15.1. The CODESYS_Profinet_Device is operating with the CODESYS Control Win V3. The usb network adapter in use is a ASIX AX88179 USB 3.0 to Gigabit Ethernet Adapter. Adapter settings: IP / SN / GW: 192.168.100.10 / 255.255.255.0 / 192.168.100.10 After I select this adapter at the Ethernet Adapter in CDS3, CDS3 shows: IP / SN / GW: 192.168.100.10 / 255.255.255.0 / 0.0.0.0 Changes to the GW...
I've got it and there is no interface to assign the modules to a controller. The solution is to deactivate every module that is used by controller 1 (within Codesys) and let all the modules used by controller 2 active.
Hey there, I need some guidance. I'm using two Profinet Controller. The first one is a Siemens S7-1516f (controller 1), the second one is a CoDeSys SoftPLC (controller 2). The Profinet Device is a Wago 750-375 (device) with several modules. TIA 15.1 is used to configure controller 1 and the device. The device is marked as Shared Device and its modules are assigned. In Codesys (V3.5 SP17 Patch 3 +) controller 2 and the devices are configured. The device is also marked as Shared Device. And here's...