Activity for toernblom
-
toernblom modified a comment on discussion Runtime 🇬🇧
Hmm, can't seem to find anything named "plclogger" ? edit: Looked through older posts and saw that you ment the log files in the root device. See attached image.
-
Hmm, can't seem to find anything named "plclogger" ?
-
If you mean logs on the profinet device, see the attached image.
-
Hey! Got it to work now. Kind of. I already had that in my config file, but it still didn't work. However, It works if i start up everything in TIA aswell as running the runtime then typing: sudo ifdown eth0 sudo ifup eth0 to reset the network adapter, then all goes green in both codesys aswell as TIA. I would still say this is some kind of weird glitch as this most likely isn't supposed to be happening..
-
Managed to fix it by adding a PN_Controller besides the profinet device and then exporting a new GSDML to TIA. When the TIA project has been loaded and is up and running then the bus is active. However, now I've got a new problem where the I/O's don't show up in TIA.. Anyone with a familiar issue?
-
Hey! Trying to have my raspberry pi as a profinet device linked to my S7 1200 PLC. Currently I'm facing an issue where the bus is not running. Version: CODESYS V3.5 SP16 Patch 4 + Raspberry pi runtime 4.0.1.0 I've also followed this guide: https://help.codesys.com/webapp/_pnio_runtime_configuration_device;product=core_ProfinetIO_Configuration_Editor;version=3.5.16.0 I also attached the log files from the Profinet Device. The device shows up in TIA but its not reachable, obviously cause the bus isn't...
-
Haha you remembered correctly! Thanks alot, that really helped 😁
-
Haha you remember correctly! Thanks alot, that really helped 😁
-
Hello, what steps did you take to generate the GSD file? Thanks, Anton