Resolved. Reinstalation of eCOCKPIT provided missing file GatewayService.exe. Thanks for your help and useful pointer.
Hi I use eCOCKPIT and e!RUNTIME is setup as Runtime System on PFC200. I belive problem is with software on my PC. I spoke to WAGO support and thay could't help. They checked everything and all looks fine except GatewayService is not running. They provide me with new e-Cockpit installation and asked to reinstall software. I tried to do what you suggested and I can't find GatewayService.exe on my computer I can see ServiceControl.exe in C:\ProgramData\CODESYS\CODESYSGatewayV3\ but from Gateway all...
I was able to find log from Gateway stored in C:\ProgramData\CODESYS\CODESYSGatewayV3\ Many entries like below if that's any help: 04/09/20 16:21:14: *** Shutdown command from service control manager received... 04/09/20 16:21:16: ERROR: Failed to set current service status [reason: 6] 04/13/20 10:51:28: *** Shutdown command from service control manager received... 04/13/20 10:51:30: ERROR: Failed to set current service status [reason: 6]
Hi there I have too much time now and decided to upgrade firmware and program on my PFC200. Upgrade firmware process went fine however when I tired to load boot program I got 'Only a limited connection to the device could be established. Therefore programming functions cannot be used.' error. Later on 'Check whether the CODEDYSY Gateway process was started' There is Codesys Gateway in my tray but actually Stopped. When I click 'Start Gateway' nothing happening. I also noticed that in CodeMeter Control...