Hello, I would like to know if there is a PROFIdrive layer in CODESYS. I am already familliar with Codesys's SoftMotion on CANOpen/EtherCAT (to control PLC Open FBs), and I need the same kind of stuff for PROFINET-IO devices; In my configuration, I have a CIFX board from Hischer to enable IRT, the SoftPLC "Codesys Control RTE V3 x64", and a servo-drive from INFRANOR that implements PROFINET / PROFIdrive (with IRT) protocol. This drive works well with the Object Technology of Tia Portal, but some...
As I said before, I already purchased and installed "CODESYS Control for Raspberry Pi MC SL" on my PI. Isn't that enough? Thanks @eschwellinger, I will take a look at these logs :)
Hello, Is this the same error I have on my PI? (see https://forge.codesys.com/forge/talk/Runtime/thread/6dde9a2175/ ) The Codesys Runtime on my PI stops after 30 minutes to a few hours without any explicit errors in the logs (only "CODESYS Control shutdown..."). Do you have similar behavior? Thanks.
Hello, I wanted to use my RPI as a Profinet Master, so I just purchased and installed "CODESYS Control for Raspberry Pi MC SL" and load my Codesys project into it. It works, but sometimes (after 1 to 3 hours) the PLC stops by itself without error in the log file (only "CODESYS Control shutdown..."). Here is the latest log after a crash (/tmp/codesyscontrol.log): 2022-07-29T08:58:36Z, 0x00000001, 1, 0, 34, CODESYS Control ready 2022-07-29T08:58:36Z, 0x00000001, 1, 0, 0, runtime licensed 2022-07-29T08:58:38Z,...
Hello, It looks like a driver issue. Did you select your NIC in the EtherCAT Master? And did you load the right Codesys driver (i.e CmpEt1000MPD) in this NIC?
Hello, You should download the missing librairies. Regards,
Hello, I am trying to test the brand new Codesys Package which adds Git support (thanks!) I've read the documentation provided with the package, but I don't know why all the "Git" menu items are disabled... (see screenshoot attached) Is this a bug? Or perhaps I missed something? I cannot clone or initialize a repos... Infos: - OS: Windows 11 Pro 21H2 - Codesys IDE v3.5 SP17 Patch 3 + (64bits) ; - Package Codesys Git v1.1.0.0 Thanks ! Regards, William
Hello, I'm using Codesys Control RTE V3.5.16.40 (x64) on my computer as an EtherCAT Master. My nic is an Intel 82574L Gigabit Adapter with the CmpEt1000 driver installed, provided by Codesys. I wanted to see the ethercat traffic using Wireshark, but it seems not to be possible when the Codesys driver is installed. So, how to see ethercat frames (or, at least, detailed logs on the traffic) with this configuration? On TwinCAT 3, it is possible by enabling the "promiscuous" option in the settings. Is...