Personal Data

Username:
yann2021
Joined:
2021-03-31 11:08:38+00:00
Location:
Switzerland / CEST
Gender:
Male

Projects

  • No projects to display.

Skills

  • Topic

User Activity

  • Posted a comment on discussion Runtime πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, I'm using Codesys 3.15 SP16 patch 6. When I load a project and connect to my Raspi, Codesys tell me I should update the device from version 4.0.1.0 to 4.1.0.0 in my project. Ok, but the Package Manager do not found any update and it seems 4.0.1.0 for the "Codesys Control for Raspberry Pi" is the last one... What can I do? Many thanks for your help.

  • Posted a comment on discussion Runtime πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, Really, no idea, nobody can help me...? 😒

  • Modified a comment on discussion Runtime πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, I’m trying to get to work a stepper motor with a DRV8825 driver on a Raspberry Pi 3 A+ with Codesys 3.5 SP17. The used stepper motor is a JK20HS30-0604. I applied the following schematic: I already adjust the voltage to about 0,25 V (Vref. = 1/2 I max.) with potentiometer on the DRV8825. I want to achieve a simple example: When I push a button I would like the motor accelerate for 3 seconds to a high speed, then maintain the speed for 2 seconds and then decelerate for 3 seconds until it completely...

  • Posted a comment on discussion Runtime πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, I’m trying to get to work a stepper motor with a DRV8825 driver. The used stepper motor is a JK20HS30-0604. I applied the following schematic: I already adjust the voltage to about 0,25 V (Vref. = 1/2 I max.) with potentiometer on the DRV8825. I want to achieve a simple example: When I push a button I would like the motor accelerate for 3 seconds to a high speed, then maintain the speed for 2 seconds and then decelerate for 3 seconds until it completely stop. I open the project named Β« StepperTestProject...

  • Posted a comment on discussion Engineering πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello "i-campbell", Thank you for your answer. "The libraries are open source, should any enterprising individual or team like to convert them so that they 'compile' in 64-bit simulation mode." Unfortunately this is far away from my knowledge and capabilities. The libraries comes from 3S - Smart Software Solution GmbH. They should provide 64 bits compatible library with Codesys. Best regards Yann

  • Posted a comment on discussion Runtime πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, Since the update to Codesys 3.5 SP17 I have an error with PiFace library when building (see attached file). What can I do? In advance many thanks for your support. Yann

  • Posted a comment on discussion Engineering πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello Reinhard, I did it but still have this error message "'SFCReset' is no input of 'GRF7_proc'" :-(

  • Modified a comment on discussion Engineering πŸ‡¬πŸ‡§ on CODESYS Forge

    Hello, I would like to reset to the INIT step a SFC. For this I found the differents available Flags : https://help.codesys.com/webapp/_cds_sfc_sfc_flags;product=codesys;version=3.5.16.0 In my case I would like to use "SFCReset" so I activated this Flag in the SFC properties > SFC Settings. Now I would like to activate the reset with a simple push button. Unfortunately when I asign the flag SFCReset to a coil I have a compil error: C0037: 'SFCReset' is no input of 'GRF7_proc' It seems this flag is...

View All