Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I am not able to import a module into the PLC configuration. In the config file the EXPORTABLE is set to TRUE for this module. I am able to export it to an XML but I am not able to import it back in. (See attahced JPG) I have also changed the MaxNum in the config file to allow more than 1 module.
Does anyone have suggestions or ideas?
I am working with 2.3.5.8.
Thanks,
Tom
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: Tomasz Wisniowski
Hello everyone,
I am not able to import a module into the PLC configuration. In the config file the EXPORTABLE is set to TRUE for this module. I am able to export it to an XML but I am not able to import it back in. (See attahced JPG) I have also changed the MaxNum in the config file to allow more than 1 module.
Does anyone have suggestions or ideas?
I am working with 2.3.5.8.
Thanks,
Tom