Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Is there a way to find out the physical addressing correlation between COM1, COM2, COM3…COM8 used in the SysComLib library? Is there a reference I can use?
Kind regards,
Doug
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
SysComLib is external system library. It implemented inside runtime system by OEM, absolutely different for different controllers. So there is no common (platform independent) method to get physical addressing. You have to ask the controller manufacturer, if you really need to know the chip, electrical scheme and the address.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
Is there a way to find out the physical addressing correlation between COM1, COM2, COM3…COM8 used in the SysComLib library? Is there a reference I can use?
Kind regards,
Doug
SysComLib is external system library. It implemented inside runtime system by OEM, absolutely different for different controllers. So there is no common (platform independent) method to get physical addressing. You have to ask the controller manufacturer, if you really need to know the chip, electrical scheme and the address.