Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
Hi, my Codesys 3.5 SP 17 was locking up when say the help screen was accessed or at other unusual times. I uninstalled it and re-installed 3.5 SP 17.1. All good so far. However, I cannot add in the single core control for the Raspberry Pi as it is missing from the drop-down menu in the Installation menu. I subsequently downloaded the relevant 'CODESYS Control for Raspberry PI 4.0.1.0.package' but it cannot be installed and comes back with the message shown below. I have even deleted the new directory and tried again to no avail. Any ideas would be greatly appreciated.
Goto start > CODESYS > CODESYS Installer (start with admin rights) and install the packages through the new installer, then it will work and CODESYS is allready aware of this issue. A fix will surely come.
PS This is the CODESYS v2.3 forum and you are using V3.5 ;-)
Last edit: hermsen 2021-08-15
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes V3.5 Sorry I am still new at this, thanks for your help; I will use the
correct group in future :) After many attempts the libraries & packages all
came good ... certainly feels like a clumsy 'hit and miss' process.
Goto start > CODESYS > CODESYS Installer (as adminsitrator offcourse) and
install the packages through the new installer, then it will work and
CODESYS is allready aware of this issue. A fix will surely come.
PS This is the CODESYS v2.3 forum and you are using V3.5 ;-)
I did try that too .... multiple times .... eventually just let
re-loading program & patient waiting resolve the problem as Codesys found
and located libraries and packages ... many hours involved, but hey I am
retired :)
Goto start > CODESYS > CODESYS Installer (as adminsitrator offcourse) and
install the packages through the new installer, then it will work and
CODESYS is allready aware of this issue. A fix will surely come.
PS This is the CODESYS v2.3 forum and you are using V3.5 ;-)
Hi, my Codesys 3.5 SP 17 was locking up when say the help screen was accessed or at other unusual times. I uninstalled it and re-installed 3.5 SP 17.1. All good so far. However, I cannot add in the single core control for the Raspberry Pi as it is missing from the drop-down menu in the Installation menu. I subsequently downloaded the relevant 'CODESYS Control for Raspberry PI 4.0.1.0.package' but it cannot be installed and comes back with the message shown below. I have even deleted the new directory and tried again to no avail. Any ideas would be greatly appreciated.
Hi
Goto start > CODESYS > CODESYS Installer (start with admin rights) and install the packages through the new installer, then it will work and CODESYS is allready aware of this issue. A fix will surely come.
PS This is the CODESYS v2.3 forum and you are using V3.5 ;-)
Last edit: hermsen 2021-08-15
Hi,
Yes V3.5 Sorry I am still new at this, thanks for your help; I will use the
correct group in future :) After many attempts the libraries & packages all
came good ... certainly feels like a clumsy 'hit and miss' process.
Bernie_BBQ
On Sun, 15 Aug 2021 at 21:28, h-hermsen forge@codesys.com wrote:
Hi,
I did try that too .... multiple times .... eventually just let
re-loading program & patient waiting resolve the problem as Codesys found
and located libraries and packages ... many hours involved, but hey I am
retired :)
BBQ
On Sun, 15 Aug 2021 at 21:28, h-hermsen forge@codesys.com wrote: