Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
you can use the demo example which is installed with the standard setup of CoDeSys. Normally it is installed under C:\Programs\3S Software\CoDeSys V2.3\Projects\Motion\4examples. In this example project you will find sample code for every method of using CoDeSys SoftMotion, thus CNC as well. Of course this is no realistic application, nevertheless this example is running on installations with 2 physical axis on different PLCs.
I hope this will help you further.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thankx for helping me Roland Wagner. Now i have made little bit more progress. I have managed to run my machine in X, Y & Z direction by using the MC_Moveabsolute and MC_Moverealive function blocks.
But for every motion i have to use indivisual function block for them. Is it possible that i define my all data ( X, Y & Z cordinate ) in array form and call that array in my Function block to do the motion?. If yes, can you please tell me how it can be possible?
secondly, right now i am moving my spining axis by using MC_MoveVelocity function block. But i have no control on the angular movement. Is that any Module available so that i can control the rotation angle??
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hello
Regards
Tahir
Hi,
you can use the demo example which is installed with the standard setup of CoDeSys. Normally it is installed under C:\Programs\3S Software\CoDeSys V2.3\Projects\Motion\4examples. In this example project you will find sample code for every method of using CoDeSys SoftMotion, thus CNC as well. Of course this is no realistic application, nevertheless this example is running on installations with 2 physical axis on different PLCs.
I hope this will help you further.
Thankx for helping me Roland Wagner. Now i have made little bit more progress. I have managed to run my machine in X, Y & Z direction by using the MC_Moveabsolute and MC_Moverealive function blocks.
But for every motion i have to use indivisual function block for them. Is it possible that i define my all data ( X, Y & Z cordinate ) in array form and call that array in my Function block to do the motion?. If yes, can you please tell me how it can be possible?
secondly, right now i am moving my spining axis by using MC_MoveVelocity function block. But i have no control on the angular movement. Is that any Module available so that i can control the rotation angle??
One demand from my side:
Please use the threads for the special topics and do not repeat them in other topics. Otherwise it will be hard to follow!
Thank you in advance