Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
bin Anfänger und möchte folgende einfache Verknüpfung mit codesys Vers. 2.3.4.2 ausführen.
Bitte kann mir das mal jemand von Anfang an erklären, vor allem die Ausführung der Variablendeklaration. Ein neues Projekt anlegen mit dem Baustein PLC_PRG im FUP Modus bekomm ich hin.
Wie muss die Variablendeklaration aussehen für folgt.
u e1.1 Start
u e1.2 N/A okay
= A2.0 RelaisX
wie erzeuge ich dann die Verknüpfung?
Claus
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Originally created by: Claus
Hallo in Forum,
bin Anfänger und möchte folgende einfache Verknüpfung mit codesys Vers. 2.3.4.2 ausführen.
Bitte kann mir das mal jemand von Anfang an erklären, vor allem die Ausführung der Variablendeklaration. Ein neues Projekt anlegen mit dem Baustein PLC_PRG im FUP Modus bekomm ich hin.
Wie muss die Variablendeklaration aussehen für folgt.
u e1.1 Start
u e1.2 N/A okay
= A2.0 RelaisX
wie erzeuge ich dann die Verknüpfung?
Claus
Hallo Claus !
würde ich in CoDeSys mit AWL so umsetzten
Viele Grüße
Wolfgang