I am searching for reliable (industrial grade) drop-in-replacements for Beckhoff EJ-IOs (https://www.beckhoff.com/en-en/products/i-o/ethercat-plug-in-modules/). Drop-In in software-perspective, of course not hardware-perspective. Beckhoff has horrible lead times right now!
I only need digital input and digital outputs on 24 V level (lower level is also possible). I need IO-cycle time of about 100Β΅S to 500Β΅S due to detection of some fast-switching inputs. I need 32 Ins and 32 Outs. Ideally I can expand the number of IOs by some bus-module later on.
Also possible would be something similar to the EL/EK-Series from Beckhoff (din-rail IOs).
Do you have a hint for me which alternative I could use? I would like to simply switch the IO-section of my CodeSys-Project and leave the rest the same.
Thank you!
Best regards
LeFish
Last edit: lefish 2022-07-11
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi everyone,
I am searching for reliable (industrial grade) drop-in-replacements for Beckhoff EJ-IOs (https://www.beckhoff.com/en-en/products/i-o/ethercat-plug-in-modules/). Drop-In in software-perspective, of course not hardware-perspective. Beckhoff has horrible lead times right now!
I only need digital input and digital outputs on 24 V level (lower level is also possible). I need IO-cycle time of about 100Β΅S to 500Β΅S due to detection of some fast-switching inputs. I need 32 Ins and 32 Outs. Ideally I can expand the number of IOs by some bus-module later on.
Also possible would be something similar to the EL/EK-Series from Beckhoff (din-rail IOs).
Do you have a hint for me which alternative I could use? I would like to simply switch the IO-section of my CodeSys-Project and leave the rest the same.
Thank you!
Best regards
LeFish
Last edit: lefish 2022-07-11
Try searching on the websites of Schneider, Wago, ABB, Hitachi and any other brand that supports CODESYS.
If it is not a safety product, you can choose products made in China .