I am trying to download my project onto my Codesys Control RTE x64 soft PLC. and I have had an issue when downloading. [FATAL ERROR] Unresolved reference: 'SYSETHERNETADAPTEROPEN' [FATAL ERROR] Unresolved reference: 'SYSETHERNETADAPTERCLOSE' [FATAL ERROR] Unresolved reference: 'GETNUMBEROFADAPTERS' [FATAL ERROR] Unresolved reference: 'GETADAPTERINFO' [FATAL ERROR] Unresolved reference: 'SYSETHERNETIPFRAMERECEIVE' [FATAL ERROR] Unresolved reference: 'SYSETHERNETETHFRAMESEND' [FATAL ERROR] Unresolved reference: 'SYSETHERNETETHFRAMERECEIVE' [FATAL ERROR] Unresolved reference: 'SYSETHERNETIPFRAMESEND' [FATAL ERROR] Unresolved reference: 'SYSETHERNETFRAMERELEASE'
Looking on the forum I have found other people had to install the network driver, which I have done following this youtube video by codesysGroup: https://youtu.be/10oj4wABaKc?si=664l83JXUGQSDlAe
I have added the network driver, please see attached image.
I have checked my BIOS to make sure my secure boot status is disabled, see attached image.
when I go to component manager, the drop down menu doesnt have the new network adapter, see attached image.
I have not yet purchased or installed any licenses is that what I am missing? What other reason is there that I can't download to the runtime.
I am using Codesys Control RTE V3 Version 3.5.21.0
I am not sure what you are asking. Which hardware ID has the network interface card? I have ran ipconfig /all and attached an image. Let me know what other information I can provide to you to help troubleshoot this problem.
Resolved this. There is a config file called CodesysControl_User that I had to edit to set the driver to component 5. I deleted the semi colon next to Component.5=CmpEt1000Drv
Yes, either adding in the CODESYSContro_User.cfg
because the driver will no longer appear in the list
or type the name from the documentation in the configuration and when the gray check mark appears, the driver is also installed. It is just not selectable anymore.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello
I am trying to download my project onto my Codesys Control RTE x64 soft PLC. and I have had an issue when downloading.
[FATAL ERROR] Unresolved reference: 'SYSETHERNETADAPTEROPEN'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETADAPTERCLOSE'
[FATAL ERROR] Unresolved reference: 'GETNUMBEROFADAPTERS'
[FATAL ERROR] Unresolved reference: 'GETADAPTERINFO'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETIPFRAMERECEIVE'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETETHFRAMESEND'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETETHFRAMERECEIVE'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETIPFRAMESEND'
[FATAL ERROR] Unresolved reference: 'SYSETHERNETFRAMERELEASE'
Looking on the forum I have found other people had to install the network driver, which I have done following this youtube video by codesysGroup: https://youtu.be/10oj4wABaKc?si=664l83JXUGQSDlAe
I have added the network driver, please see attached image.
I have checked my BIOS to make sure my secure boot status is disabled, see attached image.
when I go to component manager, the drop down menu doesnt have the new network adapter, see attached image.
I have not yet purchased or installed any licenses is that what I am missing? What other reason is there that I can't download to the runtime.
Thanks
Sorry to clarify the issues say as per the attached image. I copied and pasted the unresolved issues from someone else who had a similar problem.
Sorry to clarify the issues say as per the attached image. I copied and pasted the unresolved issues from someone else who had a similar problem.
is this latest Control RTE Version?
Strange is that the component does not occure in the list of component to add.
Last edit: eschwellinger 2025-03-18
which Hw id has your nic in the windows device manager?
I am using Codesys Control RTE V3 Version 3.5.21.0
I am not sure what you are asking. Which hardware ID has the network interface card? I have ran ipconfig /all and attached an image. Let me know what other information I can provide to you to help troubleshoot this problem.
Thank
Resolved this. There is a config file called CodesysControl_User that I had to edit to set the driver to component 5. I deleted the semi colon next to Component.5=CmpEt1000Drv
Yes, either adding in the CODESYSContro_User.cfg
because the driver will no longer appear in the list
or type the name from the documentation in the configuration and when the gray check mark appears, the driver is also installed. It is just not selectable anymore.