CODESYS Forge - CODESYS Forge / Talk / Engineering 🇬🇧: Codesys Gateway doesn't find my device

Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched. Close

Codesys Gateway doesn't find my device

Forum: Engineering 🇬🇧

Creator: yasser

Created: 2020-12-13

Updated: 2020-12-16

yasser - 2020-12-13

Hello,
I'm using Codesys 3.5 SP16 patch 3 to program an Advantech ADAM 5560CE. I'm not able to connect to the PLC with Codesys gateway. Using local gateway I can't see any device. Via ping command I can reach the PLC; if I try to change the gateway, using the gateway inside the PLC (IP 192.168.1.17 port 1217), also in this way doesn't work. Any idea?
thank you in advance,

can't find the device on the local network.PNG

change Gateway using plc IP.PNG

ping ip address of the PLC.PNG

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

dwpessoa - 2020-12-16

Hi Yasser,

I've had similar problems that I solved by disabling Windows Firewall and Anti-Virus.

Best regards

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.