I have just installed a "CODESYS Runtime Package" on my Raspberry Pi.
And now I cannot make a connection and do login and transfer my application to the Pi.
Scanning can simply not find any device.
I have worked with CODESYS for years it is first time I see this happen. What can be wrong?
Here a snippet from the "System Info"
Desired=Unknown/Install/Remove/Purge/Hold| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)||/ Name Version Architecture Description+++-==============-============-============-===============================================================================================ii codesyscontrol 4.2.0.0 armhf codesyscontrol based on SDK 3.5.17.10 , from Fri Aug 27~~~
12:04:56 CEST 2021 [121], Release build
I am using
Windows 10
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
check with top if it really runs - my feeling is you have running Bullseye and
then it is mandatory to have 4.4.0.0 runtime on Pi side.
So I would update it - and then it might work.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have just installed a "CODESYS Runtime Package" on my Raspberry Pi.
And now I cannot make a connection and do login and transfer my application to the Pi.
Scanning can simply not find any device.
I have worked with CODESYS for years it is first time I see this happen. What can be wrong?
Here a snippet from the "System Info"
12:04:56 CEST 2021 [121], Release build
I am using
Windows 10
check with top if it really runs - my feeling is you have running Bullseye and
then it is mandatory to have 4.4.0.0 runtime on Pi side.
So I would update it - and then it might work.