Welcome to our new forum
All users of the legacy CODESYS Forums, please create a new account at account.codesys.com. But make sure to use the same E-Mail address as in the old Forum. Then your posts will be matched.
Close
I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part.
I already use it on the Standard part and it works properly.
I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ?
And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It.
Have a nice Day.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I'm using CR711S from IFM and I would like to use the CAA Can Low Level in de Safety part.
I already use it on the Standard part and it works properly.
I would like to know if there is some restriction on using it on the safepart of the PLC (I tried but my PCL put himself in Stop...) ?
And if you have some example or even a forum with some types on IFM and CoDeSys, I would Take It.
Have a nice Day.